Red RC » News

December 10, 2010

Rodrigo Luis joins Serpent

Serpent have announced that Portuguese front runner Rodrigo Luis has joined their team. Rodrigo was pleased following testing of the Serpent 811 Cobra buggy and is looking forward to the new challenge. He had the following to say, “The 811 Is one of the best Buggies available at the moment, a very fast car, reliable, easy to drive and tune and transmits lots of fun driving it.” Looking forward to next season he believes it will be one of the most exciting with a very competitive National series as well as International races.

Source: Serpent [serpent.com]

December 9, 2010

Skelding wins Team Durango Winter Series Rd2

Round 2 of the Team Durango Winter Series took place on Sunday 28th November and despite the bitterly cold temperatures, 110 drivers attended the event. The track for this round of the series featured much less high grip carpet than round 1. The carpet of the touring car track had been rolled away leaving the wooden boarding as the racing surface for the majority of the track. This surface gave a medium level of grip, allowing the cars to slide around a little. Other surfaces were used, there was a carpet section at the start of the straight and the huge table top jump in front of the rostrum was also carpeted. There was a slippy surfaced hairpin on the corner before the wall ride. The table top was a new feature this time and saw the cars getting some big air time. As well as this feature there were four smaller jumps around the track.

Continue reading the report here

December 9, 2010

Orcan to enter .21 on road engine market

Orcan engines have been successful in the categories on-road scale (.12) and off-road (.21) for years and have achieved lots of national and international victories and championships. Starting with the 2010 season, SMI Motorsport from Germany is working on the development of an Orcan engine for the highest level of RC on-road racing, the 1/8 scale nitro class. A couple of drivers have been involved in testing the Orcan prototypes which are based on 7-port and 9-port engines from Novarossi and were specially prepared by Michael Heinrich (MH-Tuning). Powered by one of these Orcan test engines Uwe Baldes has achieved a remarkable success at the final round of the Nitro-West-Masters, a series of four races, held in October at Dormagen near Cologne. Using the 7-port version he captured pole position and set a new overall lap record (15,179 sec) beating the old record held by Michael Salven. “I have tested this .21 prototype engine on several circuits. This engine has proven its excellent performance with lots of torque at low revs and an impressive driveability – both valuable aspects especially for those tracks we are used to race in Germany”, concluded Uwe Baldes. “Furthermore the fuel consumption is really low – it is already a real Orcan engine and a promising basis for the future.” Also Bertram Kessler of SMI Motorsport is pleased by the test results. “With the new Xray RX8 hitting the market in 2011 it is logical that we are going to launch a .21 on-road power unit which offers the usual quality features of all Orcan engines. In the period of testing we have gained valuable experiences which will help us to develop a powerful and high efficient Orcan engine for 1/8 scale racing.”

Source: SMI Motorsport [smi-motorsport.de]

December 9, 2010

KM H-K1 Bumper plate & RX pack

More new products from KM racing who have released this new front bumper plate for their H-K1. Made from carbon fibre, the plate is lightweight, strong and also looks great, coming supplied with the aluminium posts and shims to mount it. KM have also released a 6V 1100mAh NiMh AAA receiver battery for extended run time.

View the RX pack here

December 8, 2010

Viper VST motors & Pro Gauge 5-in-1 tool

Viper R/C Solutions have been in touch to tell us about the release of some new products beginning with their new line of VST 1/10 competition BL motors. A complete range of winds is available and the the motor itself sports ultra low resistance high grade copper solder tabs and a precision CNC machined 6061 T6 ribbed billet aluminium can. Featuring fully adjustable timing, there are 5 optional high performance rotors available and the motor is ROAR legal. Viper have also introduced their new Pro Gauge 5-in-1 electronic tool that serves as a programmer for their line of electronics but also acts as a servo tester, battery checker, PPM signal monitor and for airplanes and helicopters it can act as an RPM tachometer.

View the Pro Gauge here

December 8, 2010

T-Work’s Racing machined shock pistons

T-Work’s Racing has introduced a new series of machined precision shock pistons. CNC machined from Delrin, they are available in different sizes and available use with OFNA, Agama, Mugen, Serpent, Xray and others. Unlike conventional pistons, these new pistons have a special curved design which adds vertical and horizontal strength, which increases stiffness and stability as well as being low friction.

Source: T-Work’s Racing [rc-tworks.com]

December 8, 2010

Video – Spektrum Offroad Challenge

[youtube]http://www.youtube.com/watch?v=KZ3qA24MEGs[/youtube]

With the new 22 winning on its race debut in the hands of Dustin Evans ahead of some very tough competition, Horizon Hobby were on hand to video all the action from the 3 2wd A-mains so we can all witness history in the making.

View A-main 2 and 3 here

December 7, 2010

Losi Blockhead G2 & BK Bar G2 tires

Losi have released two new 1/8th scale buggy tires, the Blockhead G2 tire and the BK Bar G2 tire, both in green compound. The intermediate Blockhead tread pattern bridges the gap between the Kingpin G2 and Eclipse tires, excellent on medium loam conditions with excellent wear characteristics in hard packed track conditions. The BK Bar G2 offers superior side bite and impeccable forward traction on hard packed tracks. Its unique tread design has tremendous structural support allowing the tire to live exceptionally longer than other smaller pin tires.

View the BK Bar G2 here