Red RC » P Off Road

August 26, 2013

JConcepts RB6/RT6 front suspension brace

JConcepts introduce the front aluminium suspension brace for the Kyosho RB6 and RT6. The all aluminium machined and anodised brace is a direct fit for the bulkhead of the Kyosho 2WD off-road vehicle and adds extra protection and a new look to the front end. The edging has been slightly chamfered to remove sharp corners and adds extra luster to an already polished looking piece. The part is available in blue or black colour and sport an etched JC logo.

Click here to view the black anodised part

August 23, 2013

STRC SCX10 gun metal anodised alloy parts

ST Racing Concepts introduce new option parts for the Axial SCX10 by re-releasing their AX10 option parts that work with the SCX10 chassis. The parts come in a new-to-the-product-line gun metal anodising and include CNC machined aluminium C-hubs, steering knuckles, 4-link plates, steering links and rear lock-outs. Available in black, silver, green and now in gun metal colour.

Source: STRC [teamstrc.com]

August 23, 2013

JConcepts stainless steel ball studs

New from JConcepts come stainless steel ball studs for Team Associated off-road vehicles and all cars that make use of inch-size hardware. They are machined from high-quality material, offer a smooth surface finish and an internal hex for 5/64” and 2mm hex wrenches. The ball studs are available in .200”, .300” and .400” length and come in packs of six pieces.

Click here to view the other sizes

August 23, 2013

STRC Nitro Slash & Slash 4×4 aluminium options

STRC Nitro Slash & Slash 4x4 aluminium options

ST Racing Concepts introduce new aluminium option parts for the Traxxas Nitro Slash 2WD and the Slash 4×4 as well as a colour variant of their shock shaft pliers. First up is the CNC machined Nitro Slash 2WD aluminium engine mount, a much stronger foundation for the Traxxas engine over the stock cast aluminium one. It does away with cracking issues in the screw thread area, can take more abuse and is available in anodised blue, gun metal, red and silver.

Click here to continue reading

August 23, 2013

Avid Associated 2WD aluminium standard topshaft

Avid introduce this standard aluminium topshaft for Team Associated B4.2, T4.2, SC10.2, SC10B and C4.2 vehicles. The drop-in replacement is made from 7075 aluminium, comes hard anodised and saves about 6.7g of weight compared to the kit part for more acceleration and increased punch due to a lower rotation mass.

Source: Avid [avidrc.com]

August 22, 2013

Yokomo Racing Performer M Series motors

Yokomo Racing Performer M Series brushless motors

Yokomo introduce the Racing Performer M Series line of 540-size competition brushless motors. Coming in a black alloy can with large openings the sensored motor is designed to deliver high torque and an easy-to-drive feel at the same time. Large heavy duty solder tabs make installation easy. The motor comes in 13 variants from 3.5T up to 25.5T including 5.0T, 6.0T, 7.0T and 8.0T windings.

Source: Yokomo [teamyokomo.com]

August 22, 2013

KO Propo DSx HV servo range

KO Propo announce three new high voltage servo on their Japanese website in the form of the DSx-1511BHC, DSx-1211CHC and the DSx-809C. The DSx-1511BHC (0.11s/15.5kg-cm) and DSx-1211BHC (0.11s/12.5kg-cm) differ by the motor used with the 1511 featuring a brushless motor and the 1211 coming with a coreless variant while both are housed in an all-metal casing. The entry-level DSx-809C (0.09s/8.5kg-cm) comes with a coreless motor and a plastic case with heatsink middle section. Just like the two other servos the 809 is 6V to 7.4V compatible.

Click here to view the other new servos

August 22, 2013

Team C 8th off-road wing skins

Team C Racing announce the release of dedicated stickers for their 1/8th off-road wings. The skins come pre-cut for an accurate and easy application, they cover most parts of the wing including the side plates and are available in three designs for black, yellow and white wings.

Click here to view the colour variants