Red RC » P Off Road

April 26, 2013

Revolution Design 210 Series steering plate R2

The Revolution Design 210 Series aluminium steering plate R2 is specially designed for the Team Durango 210 series vehicles including the DEX210, DEST210 and DESC210. The plate is totally redesigned from scratch and sports a new vertical inner ball stud position. This in combination with a more central and lower position of the ball studs does away with the need to use countless shims on the outer steering blocks in order to achieve zero bump steer. The steering plate is a direct replacement for the stock part and is CNC-machined from aircraft-quality 7075-T6 aluminium and comes black anodised and laser-etched for easy identification and a cool factory look.

Source: RDRP [revolution-rc.com]

April 25, 2013

Team Associated B4.2RS Ready-to-Run

Following on from the earlier release on the T4.2RS, Associated have also announced the RC10B4.2RS Ready-To-Run. The B4.2RS RTR is a fully assembled buggy that shares many of the same parts as the popular RC10B4.2 Factory Team kit. The B4.2RS RTR has also received upgraded features, like the Team Associated XP 2.4GHz radio system and XP metal gear steering servo. Power is supplied by a Reedy 3300kV brushless motor while the XP SC500-BL water-resistant electronic speed control with LiPo cutoff provides smooth throttle control. The B4.2RS can also be upgraded as your skills improve and budget allow with the full line of Factory Team B4 hop-ups, as well as Reedy and LRP performance parts.

View more details here

April 25, 2013

Tekno RC SCT410 & EB48 shock towers and hexes

Tekno RC have produced new carbon fiber shock towers for their SCT410 and EB48. At 4mm thick for the rear and 5mm thick for the front these shock towers will withstand the hardest of hits and are a direct fit removing 18 grams total weight from the SCT410 and almost 34 total grams on the EB48. With this decreased weight, the center of gravity will be lowered keeping your car even more planted on the track hugging those fast corners better than before. Tekno RC also now offers a stock zero-offset aluminium hex for the SCT410. These wheel hexes will fit all 12mm SC wheels and with a 6mm bore, they will fit all M6 driveshaft kits. CNC machined from high quality aluminum then hard anodized for wear, these hexes will withstand the test of time.

View the other new products here

April 25, 2013

Exotek TLR22 steering rack conversion set

Exotek have released this new steering rack conversion set for the TLR22, 22SCT and 22T. Featuring an all new CNC machined design with bearings and steel bushings for reliable steering and precise track performance, this design was carried over from Exotek’s popular parts for other buggy models and is surprisingly compact and efficient on the 22. The conversion bolts into the stock locations of the 22 chassis with ease and uses all of the stock hardware. The geometry is spot on with the steering rack working in perfect tandem with the front links and suspension of the 22, while the reverse mounted steering cranks matches the movement of the steering knuckles resulting in aligned angles of the steering turnbuckles when turning left and right. Bump steer can be easily changed by spacing the rack up or down and the steering link angle can be changed by adding spacers to the inboard ball ends. The inboard ball ends laydown position also helps eliminate the dreaded ball cup pop off’s of the 22SCT. For proper clearance of the steering rack new heavy duty servo mounts are included so that the servo is positioned 6mm further back.

View images of the conversion installed here

April 25, 2013

Team Associated T4.2RS Ready-to-Run

Team Associated have introduced the T4.2RS Ready-to-Run. The T4.2 RTR is a fully assembled truck that shares many of the same parts as the popular RC10T4 Factory Team kit. The T4.2 RTR has also received upgraded features, like the Team Associated XP 2.4GHz radio system and XP metal gear steering servo. Power is supplied by a Reedy 3300kV brushless motor while the XP SC500-BL water-resistant electronic speed control with LiPo cutoff and Deans connector provides smooth throttle control. It can also be upgraded as your skills improve and budget allow with the full line of Factory Team T4 hop-ups, as well as Reedy and LRP performance parts.

View more details here

April 24, 2013

JConcepts RC8.2 Silencer body

Seen first at the Worlds in Argentina and then used to win this year’s DNC, JConcepts have finally released the the Silencer for the RC8.2, a brand-new, ground up design which has new elements created for the highest speed circuits. A narrowed, Finnisher stance cockpit allows more fuel tank access a smoother high-speed transition and increased flow around the engine heat-sink. A deep recess around the heat-sink area with dual channeling out the rear provides air escape along with rear-end stability, while the Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires. The extended runner features are placed on the rear-end of the body enhancing the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over the pipe, fuel tank and electrical / linkage make up the main pods. The end result has the body looking extremely low-profile with heavy JConcepts edginess and appeal. The Silencer is capped off with a cock-pit “shark fin” for more high-speed tracking stability and increased roof stiffness.

View more images of the Silencer here

April 23, 2013

PSM RB One R VX3 brake discs

PSM introduce their VX3 brake discs for the RB One R buggy. The special design does away with brake fading, makes for an improved brake feeling and an overall smoother braking response. CNC-machined in Germany from 3.0mm material and coming dyed in bright white colour they weight 4.0g per piece and are available now.

Source: PSM [psm-rc.com]

April 23, 2013

JConcepts TLR22 7″ Hi-Clearance rear wing

JConcepts TLR22 7" Hi-Clearance rear wing

JConcepts has released their new 7″ Hi-Clearance rear wing for the TLR22. A slightly wider base gives the wing a larger surface area which allows more stability during low and high speeds which provide some much needed grip in tricky situations. The Hi-Clearance sections near the end plates still allow maximum suspension compression and tire expansion.

Source: JConcepts [jconcepts.net]