Red RC » P Off Road

September 5, 2023

Elceram Nitride ESC due for October release

It sparked lots of interest when it was initially revealed as part of the new start-ups announcement of former 1:10 European Offroad Champion Martin Bayer joining its team, and today Czech company Elceram has announced that their Nitride 1:10 ESC is due for October release. The Nitride is a new generation electronic speed controller for BLDC motors. Using Advanced Cooling Technology based on Aluminium Nitride Ceramic cooler, Nitride is characterised by excellent thermal conductivity and at the same time it is the first ESC with TFT LCD color display ever. These properties provide it with revolutionary features.

View features and product video here

September 4, 2023

Leadfinger Racing A2 Tactic B6.4 Body

US offroad bodyshell producer Leadfinger Racing has introduced their new A2 Tactic body and turf wing for the Team Associated B6.4/B6.4D 1:10 Buggy. The new body is the key component whether racing on carpet, turf or dirt. The A2’s straight-line design and strategically built side pods provide the B6.4 with precise maneuverability. The raised fin positioned down the centre of the body stabilises the B6.4 under full punch and high-speed passing situations. For more level jumping and quicker landings, a perfectly sized swoop at the back of the body assists air flow over the rear tower and helps guide it to the included “Sniper” turf wing. To ensure a safe return home after your victory, the body has been made from light weight and durable polycarbonate. This will also protect your B6.4 for many more battles to come should you be called to serve once again.

View more images here

August 28, 2023

JConcepts Spring box double decker w/foam liner

JConcepts has introduced this spring box to assist racer the organisation of their spring selection. The double decker design stores up to 18 pairs of springs plus 2 added compartments on each layer for miscellaneous items. The injection molded box itself has been in the JConcepts line-up for years assisting in motor and battery storage with a nice closure and stealth black colour combination. The box now makes a nice and tidy space with high density foam layered with compartmentalised section and blue floor space to aid in a visual cue to identify springs quickly. The package includes a decal for the inside of the lid for the racer to write in notes, combinations, spring rate and type, to further trackside organisation. The spring box is ideal for 1:10 off-road, and on-road racers looking to tuck away their setup secrets and keep them protected in style.

View more images here

August 28, 2023

ProStar RC Tekno 1:10 Alu Bulkheads

American based ProStar RC has released these new Aluminium Bulkheads intended for use on the 1:10 chassis offerings from Tekno. Suitable for the SC410SL, ET410, EB410, & .2 versions, as well as the SC2410T Short Course Conversion by ProStar RC, the are produced from T7 Aluminium and gold anodise finished. Laser engraved with the ProStar RC logo the bulkhead upgrade weights 44 grams and offers much greater durability than the kit standard part.

View more images here

August 25, 2023

Factory Team Diff Decoder

Factory Team has released a Diff Decoder which is says is an indispensable tool for the hardcore racer. The Diff Decoder displays a consistent, measured value for differential hardness rather than relying on an estimation or feeling. This measurement can be used to build differentials to a specific hardness, fine tune to improve vehicle performance, understand the differences between oil brands and temperature, or to replicate an existing differential. The Diff Decoder’s machined aluminium body is compact and lightweight with a 5-digit LED display suitable for measurement of a wide variety of differentials. Includes three adapters: one 1:10 7mm hex to measure at the wheel, and 1:10 and 1:8 pin adapters to measure at the diff outdrive. A 5V power source is required to operate.

View image in use here

August 25, 2023

Takashima 2.4G Wireless Receivers

Hong Kong’s Takashima D-13 has launched two 4-channel 2.4G wireless receivers. The RX-492 receiver supports the Sanwa FH-5 mode, while the RX-482 receiver supports the FH-4 operational mode. Both products weigh only 7g and are 28×20.5×18.5mm in size making them a highly cost-effective alternative choice.

View more images here

August 24, 2023

SWORKz S35-4 EVO

Sworkz has a new 1:8 Nitro Buggy with the release of the S35-4 EVO. The geometry from the Worlds Edition conversion kit provides optimised cornering speeds with a more easy handling feel and maximum traction. The S35-4 EVO features a T7075 hard anodised and lightened aluminium chassis with a new short wheel base design that was tested for a long time by our factory pilots which guarantee the best speed balance for both front and rear suspensions. HET differentials are included in the kit while the High Density Clutch Bell system are optional. The new S35-4 EVO comes with a brand new steering Lay-Down Type Steering Bell crank servo saver system. This new Ackerman design provides the driver with better control over the S35-4 EVO buggy.

Continue reading here

August 23, 2023

Densford & MacDonald complete ROAR Committee

ROAR, the sanctioning body for RC racing in the United States & Canada, has announced the completion of its Executive Committee with the appointments of Brent Densford as Competition Director and Lance MacDonald as Promotions Director. Under the guidance of new President Clayton Young, ROAR appears to be on a much overdue positive trajectory and the latest appointments should be a boost to national championship racing and the bobby in general. Densford is the owner of Beach RC while MacDonald has vast experience in race organisation and so their combined experience and knowledge should assist ROAR in being more more proactive in the promotion of the hobby as opposed to just being a rule enforcer.

Read official ROAR announcement here