Red RC » P Off Road

March 11, 2009

Traxxas Slash Big bores & Slayer centre diff

New from Traxxas for the Slash is this big bore shock kit for the ultimate in bump and jump control. These fully assembled precision dampers are the perfect addition to the popular Slash Pro 2WD Short-Course truck, using machined aluminium bodies for consistent action lap after punishing lap, with a hard-anodized finish for extra strength. Also new from Traxxas, but for the gas powered Slayer is a new centre differential which helps balance power distribution from the TRX 3.3 Racing Engine to reduce front end lift on acceleration and improve steering responsiveness. When used with the dual-disc rear brake kit, brake bias and power distribution can be adjusted independently for maximum performance in various conditions. This is the perfect combination for putting power to the ground in rough terrain and maximizing corner speed.

Click here to see the centre diff

March 7, 2009

PSM Racing MBX-6 fuel tank posts

PSM Racing have released new machined aluminium fuel tank posts for the Mugen MBX-6 1/8th scale buggy. Made from high grade materials they are a direct replacement of the standard stock part. Sold in pairs, they are available in stanadard silver colour and are supplied with the required fasteners.

Source: PSM [psm-racing.com]

March 6, 2009

Associated 1/10th blank shock pistons

New from Team Associated are 1/10th scale blank shock pistons. Suitable for use with the B4, T4, B44 and TC5 shock absorbers, they are perfect for those who are looking for some extra tweaks to dial in their suspension. They allow for a wide array of hole sizes and number of holes but come with 2-hole, 3-hole and 4-hole locating dimples as standard.

Source: Associated [rc10.com]

March 4, 2009

Answer RC 8ight Clutch bells

After much development and quality control, Answer-RC have made their new clutch bells available, suitable for the Team Losi 8ight buggy and truggy, both the original version and 2.0 versions. Manufactured from high quality materials on a special gear wheel machine with unparralled tolerance on both the bearing fitting and gear acuracy they are available in 13T, 14T and 15T versions and come supplied with both bearings.

Source: Answer RC [answer-rc.com]

March 3, 2009

JConcepts Illuzion Hi-Flow RC8 bodyshell

Seen for the first time at last month’s Nitro Challenge in the hands of race winner Ryan Maifield, JConcepts have now released their new Illuzion Hi Flow 2.0 body for the Associated RC8 buggy. Special consideration has been made for the Hi-Flow 2.0 body in regards to the air filter, side guards, battery box and extra clearance around the throttle and brake linkage, and thanks to JConcepts, the Illuzion body is also a drop fit and requires no hassles when installing or removing the body. Race inspired aggressive styling, Illuzionized cab and durable design are just some of the features that make this new body stand out.

Source: JConcepts [jconcepts.net]

February 28, 2009

ST Racing Concepts Traxxas upgrades

New from ST Racing Concepts are a number of anodized optional parts for the Traxxas range of cars, including the Slash. They have teamed up with one of the best manufacture in the business and MIP’s multiple World Championships and National Championship winning design CVD can now be part of an important upgrade to your Traxxas Slash. The new C-CVD style design eliminates the original set-screw over drive pin design and instead utilizes a unique screw-on outer C-Ring that captures the drive pin in place. The CVD bones are also constructed of larger diameter for even more durability and comes complete with a pair of beefy steel diff outdrives as well. Also works on Nitro Stampede and Nitro Rustler The company also offers a heat treated polished steel lock-nut style hinge-pin kit, which will solve the problem of the stock hinge pins backing out of the A-arm. CNC Machined from high-quality steel, it is then heat treated to increase durability and then polished for ultra smoothness, nylon insert lock-nuts at each end of the hinge-pin prevents the pins from ever coming loose. Finally, just for looks, there are these CNC machined aluminium front body posts, with multiple body clips holes to adjust the front body height, and available in 4 colors – Black, Silver, Red, and Blue, to match any paint scheme. Sold in a pair.

View the other products

February 28, 2009

PSM Racing Hyper 9 Shock mounts

New from German company PSM Racing are these anodized 1/8th scale buggy shock mounts. Machined from high grade aluminum, they are supplied in a set of 4 and are designed to fit perfectly on the Hobao Hyper 9 and 8.5 shock towers. Available anodized in blue, grey or silver.

Source: PSM [psm-racing.com]

February 27, 2009

JConcepts Bar Code buggy tires

JConcepts have released their Bar Code design buggy tires in blue compound. Like the name suggests the alternating bar design provides uncompromised support for blue and black groove conditions. Designed for maximum performance when new or used as the design allows even wear all the way down to the tire body. Bar Codes in new condition excel on hard surfaces that have taken rubber with either dry or wet grooved conditions. Worn Bar Codes excel on indoor or outdoor clay tracks where a minimal dust groove has formed.

Click here to see the other tire