Red RC » P Off Road

November 13, 2007

SIIM PGR engine range

We have been contacted by SIIM Racing in Spain to announce the upcoming release of their new engine range called SIIM PGR. The Spanish brand will release 3 engine types, a SIIM PGR S12T for 1/10th touring, a SIIM PGR S21P for 1/8th on road and finally a SIIM PGR S21B for 1/8th buggy. These new engines have been tested for a long period of time to ensure the performance and quality are up to today’s high standards needed to rise the top at international races. Manufactured in Italy in collaboration with a prestigious engine builder, the SIIM PGR engine family will establish a new reference in the international market. Its high performance, durability and design will not go unnoticed for the expert audicences. Photos to follow.

Source: SIIM [siimengines.com]

November 12, 2007

Robitronic Air filter & After Run oil

Robitronic have released a number of engine maintenance parts in the form of new air filter foams, air filter oil and after run oil. First up are these turbo double air filters, which are perfectly cut and are used with high-quality oil that protect your engine from dangerous dust particles. The air filter sets are available in 2 formats of 6 pieces with 45ml Air Filter oil, or 12 pieces with 90ml Air Filter oil. Also available seperately is the high quality air filter oil, which thanks to its colour allows you to see the saturation when applied. Finally, Robitronic have released some After Run oil that comes in both 45ml and 90ml and when put into the engine helps prevent the engine internals from rusting when not being used between races.

Click more to see the other products… content

November 12, 2007

K-Factory TM M1B Rear chassis stiffener

More new products from K-Factory, this time its the release of this black, hard coated, rear chassis stiffener for the Team Magic M1B 1/8th scale buggy. These superbly crafted stiffeners are designed to improve the M1B’s performance on high bite, manicured tracks that are seen in many countries around the world. In these conditions, a stiffer chassis will exploit the higher levels of traction that are present by reducing chassis flex which will adding traction in low bite conditions, can reduce response in high bite conditions.

Source: K-Factory [kfactoryracing.com]

November 6, 2007

Panther T157 MT38 Series Gator tire

Panther tires have released these T157 MT38 Series Gator tires which are designed to fit Losi 8ight T wheels as well as other 38 series wheels. Sold in both soft and medium soft compounds, they weigh in at 122g each and are 2.5″ wide and 5.5″ in diameter.

Source: Panther [pantherteam.com]

November 1, 2007

Team Losi HD Brake Disk Set

Team Losi have announced the release of this HD vented brake disk set, for their 8ight and 8ight T. Machined from special high-thermal mass material, they can withstand very high temperatures for extended periods of time without failure. With brake disk life increased by 250% over the stock set, they offer consistent braking even after long run times, while slots in the disks eliminate caliper float caused by material gassing and the slots also help cool the braking components.

Source: Horizon Hobby [horizonhobby.com]

October 31, 2007

Edit RC 1/10th Off Road Race Wing

Edit RC have released this ‘E-wing’ for 1/10th scale off road buggies that claims to offer huge downforce with minimal drag. The wing sits very low on the rear shock tower and has a large kick-up area for extra rear downforce and has been made from tough polycarbonate for extra durability and strength. Used by British and European Champion Neil Cragg, it is sold clear and comes supplied with overspray film.

Source: Edit RC [rc-edit.com]

October 30, 2007

RMV Symbio Truggy shell

We wrote about the new Symbio body shell from RMV back in the beginning of August when it was spotted at the NRW-Cup in Dormagen. Well the T1 version of this shell is now available to buy and is suitable for the Kyosho ST-RR, Xray XT8, Robitronic Mantis long and other similar cars, while in November RMV plan to launch the T2 version which features some adjustments to mounting positions and will be suitable for the Mugen MBX-5T and Jammin X1 CRT.

Source: RMV [rmv-deutschland.de]

October 30, 2007

Team AJ Servo horn plate

Japanese company Team AJ have released this carbon fibre servo horn plate for use on 1/8th off road buggies and other similar car. Made from lightweight carbon fibre, the set includes 2 screws to mount it to the standard Sanwa /Airtronics servo horn, and helps strengthen up this part as well as add extra cool factor to your car.

Source: Team AJ [teamaj.jp]