Red RC » P Off Road

March 31, 2017

Active Hobby Products wide flange M4 wheel nuts

Japanese company Active Hobby Products have introduced their new wide flange M4 wheel nuts for 1/10th on-road and off-road cars. Offering an increased diameter of 11.3mm, compared to the 9.6mm of most flanged M4 nuts, the parts allow for a more secure wheel fitment while also reducing wobbling issues associated with small diameter nuts. At 5mm they are also thicker than many fasteners and a serrated back section grips into the wheel’s surface for greater security against unintended loosing than standard nyloc nuts. The wheel nuts come in sets of four, in the five colours of black, blue, red, orange and silver and due to their diameter they may not fit all wheels on the market.

View more images here

March 31, 2017

Exotek TLR 22 carbon fibre battery strap

Coming from Exotek and made for the TLR 22 4.0 and 3.0 buggies equipped with standup gearboxes is a carbon fibre battery strap. The design works with the stock body clips or Exotek’s optional twist nut post set and it is stronger than the standard battery retainer, keeping the battery from moving while adding visual impact at the same time. Included with the battery strap comes an alloy hinge plate for secure mounting.

View another image here

March 30, 2017

Ultimate EFRA 2141 Super Strong off-road exhaust set

Following the introduction of the EFRA 2142 Super Strong off-road exhaust set, Modelix Racing have also announced the release of the Ultimate Racing EFRA 2141 Super Strong exhaust. Made of high-quality aluminium and coming with a polished finish, the pipe was designed especially for the use with the Ultimate Engines M3T and other O.S. based power plants. The pipe provides precise and linear throttle response in the low to mid RPM range as well as an optimised power curve and fuel economy, increasing the runtime by almost a minute depending on the track conditions and grip. Included in the set are the EFRA 2141 pipe, manifold, gaskets as well as mounting springs.

Source: Modelix [modelixracing.com]

March 30, 2017

Answer RC introduce new D8 series option parts

UK company Answer RC have introduced a range of new option parts for the HB Racing D8 series of kits. First up are front and rear carbon fibre arm covers whose purpose is to stiffen the monocoque arm and give a less flexible suspension setup while reducing traction a little bit. The covers are ideal in high-grip situations or to tune the handling of the car and they come as separate sets for the front and the rear of the D817, E817, D815, D812 and RGT8.

Continue reading here

March 30, 2017

Core RC 1/10th off-road big bore springs

Schumacher have introduced the new Core RC big bore springs for 1/10th off-road buggies. The high-quality progressive springs allow the car to float over bumps but not roll too much during cornering and the consistent wire diameter means that the characteristics of each spring is similar, giving a consistent performance across the range. The stiffness increment between springs is very small, allowing fine adjustment of the suspension. Available now are the medium “orange” 4.3lbs and “yellow” 4.6lbs springs and to enable the big bore springs to be used on small bore shocks Schumacher have release two optional converters for the top of the spring, enabling better seating. The bottom of the spring fits regular small bore shock bottoms.

Source: Schumacher [racing-cars.com]

March 30, 2017

RPM Traxxas blue heavy duty camber links

Coming from RPM and made for the Traxxas e-Rustler and e-Stampede 2WD trucks are heavy duty camber links. Moulded from tough and virtually indestructible nylon material the links replace the standard parts on Traxxas’ popular 2WD trucks for improved durability. Included in the set are four camber links, two for the front and two for the rear of the truck.

Source: RPM [rpmrcproducts.com]

March 29, 2017

Trinity 7.4V 5000mAh Turf Tuff Pak LiPo battery

Coming from Trinity is the new 7.4V 2S 5000mAh Turf Tuff Pack LiPo battery. Offering standard shorty dimensions of 96×46.7×24.7mm and being built from high-quality 5000mAh cells the battery is aimed towards racing on high-grip carpet and astro turf tracks whose increased traction can make it tough to not dump the battery towards the end of a run. With the increased capacity making five or even seven minute races with low-turn modified motors is no longer an issue. The battery weighs in at 222g and it utilises 5mm tube-type connectors.

Source: Trinity [trinityrc.com]

March 29, 2017

RDRP B6 Titanium Lower Shock Screw Set

Revolution Design Racing Products have introduced a Titanium lower shock screw set for the Team Associated B6 and B6D buggies. It includes four lower shock mount screws made from high-quality titanium. The fasteners do away with the standard steel screws and they are of a unique design that only sports threaded sections where they are needed, while areas to which the lower shock eyelet bushings attach are of a plain design for improved durability and precision. The screw heads are also unique in the way that they feature dual 2mm and 5.5mm hex sections that allow to use 2mm hex or 5.5mm nut drivers to fasten or loosen the screws. Included in the set are two front and two rear shock mounting screws.

View more images here