Red RC » P Off Road

March 27, 2017

Team Associated RC8B3.1 nitro & electric kits

Team Associated have introduced the new RC8B3.1 nitro and electric 1/8th scale buggy kits. Both built on the proven third generation RC8 platform and feature new H.T.C. High Torque Capacity differentials with increased fluid capacity and a more consistent feel even in long mains. Precision CVA drive shafts are included front and rear to keep suspension travel free through the entire stroke, and the suspension and drive-train package is bolted to a hard-anodised 7075-T6 aluminium chassis designed for optimum weight distribution, ground clearance, and better overall handling. As a result, the RC8B3.1 Team Kits changes directions faster, and are more compliant and stable in rough terrain. Part of the new RC8B3.1’s package is also an all-new, easy-to-maintain, 4-shoe clutch.

View the features and more images here

March 27, 2017

T-Works D817 aluminium chassis side guard screws

T-Works have introduced a set of aluminium side guard screws for the HB Racing D817 off-road buggy. Made from aircraft-grade 7075-T6 aluminium and coming with a silver finish, the screws save some weight on the outer parts of the chassis while also adding visual impact. The fasteners are direct replacements for the stock parts and they come in sets of ten.

View another image here

March 27, 2017

Intech Racing ER-14 & ERSC-10 lightweight alloy chassis

Intech Racing have introduced new aluminium lightweight aluminium chassis for the ER-14 and ERSC-10 1/10th scale off-road vehicles. The ER-14 specific part is machined from 2.5mm alloy and it sports excessive machining to save about 20 percent of weight while the 3mm ERSC-10 part is about 15 percent lighter than the stock chassis. Both main plates are machined from 7075-T6 aluminium and they are hard anodised for wear and looks.

View the ERSC-10 chassis here

March 24, 2017

HB Racing D817 screw type shock pins & Ti turnbuckles

Coming from HB Racing are new option parts for the D817 buggy in the form of a screw-type shock pin set and several titanium turnbuckles. Starting with the shock pins, the parts were designed to securely hold the shock in the suspension arm. The new design features a hex head for easy installation, threads that go directly into the shock arm, and left hand and right hand threads to prevent the suspension arm movement from loosening the pins. The set comes with a pair of left hand threaded pins and right hand threaded pins each, all of which are machined from lightweight aluminium and coming anodised for easy identification of the thread direction.

Continue reading here

March 23, 2017

Xray XB4 9 degree graphite C-hubs

Coming from Xray and made for the XB4 line of vehicles are new 9 degree caster C-hubs moulded of graphite composite material. The rigid graphite material is suitable for most track conditions but especially for high to very high-bite surfaces while the overall design allows for easy CVD assembly swaps and no driveshaft jamming issues at high steering angles and during hard crashes. The hubs are available separately for the left and right hand side of the buggy.

Source: Xray [teamxray.com]

March 23, 2017

JConcepts YZ-2 elephant trunk style chassis brace

JConcepts has added a new item to their Shapeways store for Yokomo YZ-2 owners using a laydown transmission. The elephant trunk style chassis brace replaces the stock unit and uses a single column support which promotes flex characteristics giving traction gains associated with these types of adjustments. With the single post, there is also increased clearance around the motor and tabs for easier soldering and wire routing. The built-in ledge helps minimise issues with the battery brace popping out during hard landings and crashes. The mount attaches at the top and bottom with stock hardware and it is available directly through JConcepts’ Shapeways store.

View another image here

March 23, 2017

HB Racing D413 hard suspension arms

Coming from HB Racing are hard suspension parts for the D413 1/10th 4WD buggy. Available for the front and the rear, the arms are moulded from a harder composite material for increased overall stiffness and thus improved handling on high-bite surfaces while also reducing the buggy’s sensitivity to changing traction conditions.

View the rear arms here

March 23, 2017

Losi Desert Buggy XL-E 1/5th scale electric RTR

Losi have introduced the Desert Buggy XL-E 1/5th scale 4WD electric RTR buggy. The all-wheel drive ready-to-run buggy builds on its nitro sibling but features a revised shock package with new O-ring and shock guides to provide improved feel, enhanced performance and upgraded tunability. The 4WD chassis is equipped with an aluminium centre differential for added strength and durability while new chassis brace plates add rigidity and stability. The Dynamite 800kv brushless power system with 8S Fuze brushless controller is good for speeds of up to 80km/h when on 8S power and the built-in Active Vehicle Control system and Spektrum DX2E transmitter keep things in control no matter how intense the action gets. The package is rounded out by MAXXIS Creepy Crawler tyres, a bright LED light bar and your choice of grey or black bodyshell designs.

View the features and more images here