Hudy have released this highly-accurate precision stepped ride height gauge for checking the ride height of 1/10th & 1/12th scale pan cars. Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment. CNC-machined, premium-quality lightweight duraluminium is black elox-coating for smooth, long-lasting finish and stylish look. Laser engraved with Hudy logo and scale.
Source: Hudy [hudy.net]
World Champions ATS Tyres in Italy have released a new range of yellow coloured 1/12th scale rims. Identical in design to the current range of CRC wheels, these versions have been made from a new material which gives the car better grip and makes it easier to drive. The foam used with the tires remains the same high quality as before but the hardnesses have been adjusted to reflect the more popular compounds.
Source: ATS Tyres [atsmodel.com]
New from Hong Kong based Zeppin Racing are these handy weight balancers for the Xray T2 when using LiPo batteries. Made from brass, each weight is 15 grams and the racer can add or remove a balancer for positioning the weight differently. A super thin design, when in position they only protrude 0.5mm above the chassis, and do not affect the chassis twisting characteristic unlike large and long brass trays. Each package comes with 6 pcs total 90grams.
Click here to see them in position
Italian company Mon-Tech Racing have contacted us with information on a number of new items that they have just released. First of all is their new TCR body shell which has been designed for maximum performance thanks to the front end design and narrow cockpit that allows a free flow of air to the rear wing. As with all Mon-Tech shells this one has been made from high quality polycarbonate and come supplied with decals, window masks and overspray film. For 1/8th scale on road shells their is a new body stiffener set that have been molded at two 45 degree angles for extra rigidity. The set includes 3 stiffeners for each side of the shell along with a rear trim strip. Finally, for the Schumacher Mi3, are 2 machined braces that allow the car to easily accept a LiPo pack, and thanks to the weight of the material used and in positioning the battery further out from the centre line, it helps balance the car perfectly.
Click here to see the other products
New from Xray is this optional CNC-machined 4-cell chassis for the XII made from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing. The chassis layout is optimally designed to provide proper stiffness for excellent handling, while being flexible enough to generate good grip and traction. This thicker and therefore harder chassis is best used in higher-traction conditions and should be used with the 2.5mm rear pod lower plate.
Click here to see the rear pod lower plate
Shepherd have released new low friction aluminium pulleys for their Velox V8 1/8th scale. Made from high quality aluminium they feature a lightweight design to reduce the rotating mass and have been hard-coated to protect the space between the teeth from building up dirt, grass & sand due to the reduced adhesion. This results in less maintenance and less wear of the belts. Available as individual pulleys (16T, 18T & 20T) or as a complete set of three.
Source: Shepherd [team-shepherd.com]
Serpent have released their new pre assembled RCC-X shock absorbers. The 2009 version RCC-X features a better supported shock rod that uses a delrin bushing and a new design x-ring, in place of the o-ring, that is made of a special silicone rubber that provides a better seal with less friction. A new mold for the nylon parts has also been made and so the nylon parts of the shocks are also improved, including pistons and ball-joints too. Suitable for all 1/8th and 1/10th scale gas-cars, as well 1/10 electric touring cars they are available with long or short shock shaft and come with optional 1, 2 & 4 hole pistons.
Source: Serpent [serpent.com]
Xray have released a wide range of high-performance 48-pitch micro pinion gears, that have been manufactured from special steel for toughness and durability. Featuring precision-cut teeth with chamfered edges, they are available in a range from 9T – 23T. For smooth operation, it is advised to run them in first.
Click here to see the full range
