Red RC » P On Road

May 31, 2018

Race Opt MTC1 4WD mini conversion set

Race Opt have released first images of their 4WD mini conversion kit for the Mugen MTC1 touring car. It is understood that the set will include all needed parts to convert Mugen’s 1/10th electric tourer into a competition-grade M-type 4WD car and thus the set will utilise a new carbon fibre main chassis and top deck, new carbon fibre shock towers and also updated, narrow track width suspension parts. The conversion is currently shipping and full information about the specifications and features should become available soon.

View more images here

May 31, 2018

Shepherd Velox V8 low-friction drive belts

Shepherd have announced the release of their new low-friction drive belts for the Velox V8 1/8th on-road kits. Available as 210mm front, 435mm centre, and 201mm rear belt, the parts will significantly lower the drivetrain drag for improved acceleration, top speed and mileage. The super-soft belts are available from now on.

Source: Shepherd [team-shepherd.com]

May 30, 2018

Xray RX8 graphite low-friction belt pulley set

Coming from Xray and made for their RX8 line of 1/8th on-road cars is the graphite low-friction pulley set. The transmission belt pulleys are moulded from a specially-formulated graphite composite mix for reduced friction and increased performance and durability. The lightweight parts stand out due to their bright orange colour and they are available as complete set, as complete pulley cover set and also as separate items for the front, centre and rear areas of the car.

Source: Xray [teamxray.com]

May 30, 2018

Shepherd Velox V8 2.4mm & 2.8mm swaybars

In order to further fine-tune the handling characteristics of their Velox V8 on-road car, Shepherd have introduced two new swaybar thicknesses. Adding to the already available 2.2mm, 2.6mm and 3.0mm variants are 2.4mm and 2.8mm wires. They are usable on both the front and rear end of the car and are available separately from now on.

View another image here

May 29, 2018

Hiro Seiko introduce pink & green alloy hardware

Hiro Seiko have announced the addition of two new anodising colours to their range, making it ten different colour shades in total. New and available from now on are pink and green surface coatings for their popular aluminium hex screws that allow users to further personalise their gear – be it chassis, radios, tools and more.

Source: Hiro Seiko [hiro-seiko.com]

May 29, 2018

RC-Mission T4 bulkhead alignment tool

RC-Mission have introduced their new bulkhead alignment tool for the Xray T4 touring car and similar kits with 19mm bulkhead spacing. The alloy jig will be inserted between the left and right bulkhead with the included steel shafts further adding support to the assembly. With the block and pins in place the owner can now loosen and retighten both the lower bulkhead mounting screws and also the upper bulkhead and shock tower fasteners for perfect alignment of all parts involved. When all parts are straightened up, the pins and block will be removed, the diff or spool installed and the bulkhead covers attached. The tool is usable for all T4 platforms.

View more images here

May 29, 2018

Twister RC Dancing Rider option parts

Coming from Twister RC and made for Tamiya’s popular T3-01 Dancing Rider trike are three new option parts. The range includes carbon fibre optionals such as the Graphite Steering Parts kit and the Graphite Support Arms set as well as an aluminium battery mount post. All sets include suitable hardware and they are direct replacements for the standard kit items.

View the other new parts here

May 29, 2018

BMT 016GT Nickel-plated aluminium clutch bell

BMT have introduced a new Nickel-plated aluminium clutch bell for the 016GT on-road car. The bell weighs in at only 7.2g, sparing a more than 10g over the original part for reduced rotational mass, which equals faster acceleration and thus improved on-track performance.

Source: BMT [bmt-team.com]