June 6, 2018

Reedy HV 30mm motor cooling can

Coming from Reedy is their new high-voltage compatible 30mm motor cooling fan. It comes with a handy 195mm extension and is simple to install by plugging directly into the receiver where it operates off BEC voltage. Because it has HV capability, it can also be soldered directly to ESC battery terminals to achieve 24000 RPM and maximum cooling. Installing in the vehicle is as easy as double-sided tape or fitting it to a fan mount or heat sink.

Source: Team Associated [teamassociated.com]

June 6, 2018

Tamiya Dancing Rider RTR set & chrome accessories

First seen during the recent Shizuoka Hobby Show and officially announced now are Tamiya’s forthcoming ready-to-run version of the T3-01 Dancing Rider trike as well as a load of chrome-plated accessories. As for the RTR kit, the 3-wheeler comes factory assembled, with a silver-painted body shell as well as 2.4GHz radio system. It is understood that, apart from being already built, the vehicle is of the same specification as the kit variant. New on the option part side of things and usable for both the kit and RTR kit are the four new chrome-plated sets that are available separately and as gear case A-parts and frame C-parts while the chrome plated front wheel and the M-Chassis compatible 11-spoke rear rims round out Tamiya’s bling package for the popular trike. All of the above items will become available in the second half of July.

View the chrome accessories here

June 6, 2018

BMT 984 hard anodised aluminium front axles

BMT have introduced a set of hard-anodised aluminium front wheel axles for the 984 on-road car. The 7075 alloy wheel axle shafts are a direct replacement for the stock parts and they are designed to scrub both unsprung weight and rotational mass, resulting in improved suspension efficiency and quicker spool-up. Additional machining further scrubs weight and different sets of cross pin holes allow to use a fresh pair of holes once the actual start to show signs of wear, improving the lifespan of the parts.

Source: BMT [bmt-team.com]

June 6, 2018

Bruno RC BC-1863X aluminium battery stop

Coming from Bruno RC and made for their BC-1863X servo is an adjustable aluminium battery stop. The part attaches to the top of the Xray T4-specific BC-1863X servo mount and it helps to set the gap between the battery and the belt, using a single screw. The items is made of aluminium and it comes black anodised for wear and looks.

View more images here

June 5, 2018

SchuurSpeed Xtreme Spec V4 stock brushless motors

Around for a while but only officially announced now are SchuurSpeed’s new Xtreme Spec V4 stock class brushless motors. They are engineered and designed in Southern California to EFRA, IFMAR, and ROAR specifications and feature an extremely short stator for maximised RPM and low internal resistance as well as the latest rotor design using a high-Gauss 1600+ magnetic material mixture. The included rotor is a 12.5x24mm and the new solder tabs and collector ring design makes for low resistance but also lowers the centre of gravity. The redesigned airflow can ensures even lower operating temperatures and quicker cool off and the CNC endplates ensure sensor and bearings are perfectly aligned. The completely rebuildable motor comes equipped with high-precision RPM bearings as standard and it weighs in at only 145g, which is 30g lighter than the previous motor. The power plant is available in 10.5T to 25.5T specifications and it has already proven its capabilities by winning the 13.5T Wheeler and 17.5T Buggy classes at this year’s Desert Classics, it took podiums at the JConcepts Stock Nationals and scored a Top 10 finish at the recent Reedy Race.

View more images here

June 5, 2018

Xpress XQ1S anti-roll bar set

Coming from Xpress and made for their Execute XQ1S club-level touring car is a complete anti-roll bar kit. The set includes all available swaybar wires and also suitable mounting hardware to make it a drop fit on both the front and rear axle of the car. Using the anti-roll bars helps in a variety of conditions, from low to high grip, as they reduce body roll and thus take away some steering while also improving traction at the same time.

View the mounted anti-roll bar here

June 5, 2018

Tamiya TB-05 carbon fibre shock towers & side rails

Tamiya have introduced new carbon fibre option parts for the TB-05 Pro touring car. The range includes 3mm front and rear graphite shock towers that offer increased strength and also more tuning options compared to the standard composite parts. The front tower utilises a total of five different upper shock mounting positions while the rear towers offers seven different mounting holes. Both parts are available separately and they come including suitable mounting hardware. Also new are 2.5mm carbon fibre side rails to reinforce the chassis construction. The items maintain good accessibility to the chassis components yet increase pitch and roll stiffness. Includes comes an assortment of mounting hardware to make it a drop fit. All parts will become available by end of July.

View the other new parts here

June 4, 2018

T-Works titanium downstop screws

T-Works have introduced new downstop screw sets for a range of vehicles. The hardware is available in M3x8mm, M4x8mm and M4x10mm dimensions with the M3 screws featuring a 1.5mm hex section while the M4 screws utilise 2.0mm hex tools. The precision machined screws feature a round head for precise droop setting adjustment with the shape ensuring the chassis is not getting damaged and they are available in 4-piece packages.

View the other droop screws here

Mibosport
VP Racing
T-Works