New for the H-K1, KM Racing have released a new aluminium clutch bell and black clutch shoe. The aluminium clutch bell is lighter than the standard steel version and when combined with the new black material clutch shoe will give your car more punch in the bottom end. The black shoe must only be used with the aluminium bell.
Made for Xray’s latest X10’15 and X12’14/15 cars are these eccentric aluminium inserts for the front lower A-arms. Available as standard, +/-0.5mm and +/-1.0mm variant, the bushings come in pairs and allow to increase or decrease the front track width in order to fine tune the handling of the chassis while adding a bit of durability at the same time.
Source: Xray [teamxray.com]
Following the STC-4 190mm touring car bodyshell Sweep will soon have another TC body available. The teaser image of the forthcoming STC-6 shows a different hood design with two additional ridges that span from the grille section toward the wind screen. The grille itself also is of a slightly different design while additional ridged above the lower louvers give a hint on an updated aero package compared to the STC-4. We bring you more information about the body as soon as we get them.
Source: Sweep [sweepracing.com]
Avid introduce these black colour wing mount buttons for 1/10th on-road and off-road vehicles. They were designed after Avid’s successful 8th off-road wing button, they feature a countersunk screw hole and the same contact surface as the 8th buttons for an improved fitment of the wing and less deformation, resulting in increased rear traction at high speeds. The buttons come as pair, they are CNC-machined from aluminium and laser-etched with the Avid “A” and are usable on most touring cars and off-road vehicles that use M3 screws to fasten the wing.
Source: Avid [avidrc.com]
Hiro Seiko introduce new lightweight screw kits for some of the latest car kits around. Coming as all-titanium or mixed titanium and aluminium sets, the screw kits significantly reduce the weight of the car – between 17g and 33g, depending on the vehicle they are used on – while adding a cool look at the same time. The latest additions are titanium kits for the Yokomo B-Max2 in MM and MR configuration, the Team Associated B5M, the Xray RX8’14 and NT1’14 as well as the Tamiya TB Evo.6. For the Evo.6 Hiro Seiko also have a mixed set with titanium and blue anodised aluminium fasteners available. All sets make use of high quality hex head hardware.
Source: Hiro Seiko [hiro-seiko.com]
Hirosaka RP have five new high-performance servos with brushless and coreless motors available. Starting with the two brushless servos, the DBS-1 (0.08s/10.6kg-cm) low-profile and DBS-2 (0.09s/22.5kg-cm) standard-size servo are usable with 6.0V to 7.4V input and they are build using an aluminium middle heatsink and upper aluminium case for maximise durability and improves heat dissipation. The servos are usable in a wide range of applications.
Click here to continue reading
Yokomo introduce the Toyota 86 touring car kit based on the shaft-driven SD Sport 4WD chassis. Coming with a strong moulded composite chassis the kit also offers full-time 4WD, a fully adjustable double wishbone suspension, front solid axle and rear ball differential, front universal driveshafts and rear dog bones as well as composite shock absorbers, a cast aluminium clamp-type motor mount and full ball bearings. The kit is rounded out by an officially licensed Toyota 86 bodyshell and a set of scale wheels and high-grip semi-slick tyres. The kit will hit stores around mid-August.
Click here to view more photos
New from Wild Turbo Fan and Mad Max Products comes the Mad Max 3D fan mount. Different from conventional fan mounts with only a small contact area, the unique 3D design allows a much stronger connection to the motor using a custom made carbon fibre cross brace and an aluminium stopper. This fan mount is usable with 30mm to 40mm fans including WTF’s Windy fan and will fit the Awesomatix touring car and most belt driven cars. The design allows to take of the fan using only one screw after initial assembly and the mount is of a very low weight at only 5.8g. Included with the mount comes all needed hardware as well as two different carbon mounting brackets.
Click here to view more photos
