Red RC » Sebastian

January 9, 2017

Yeah Racing TT-02 aluminium essential conversion kit

Yeah Racing’s aluminium essential conversion kit for the Tamiya TT-02 entry-level touring car is now also available in red colour. Machined from aluminium and coming anodised in a bright red colour the set includes a range of alloy parts to replace the respective plastic pieces in the TT-02 kit. Part of the package are front and rear lower A-arms, front steering blocks and rear 2 degree toe hubs, steering bellcranks, a steering plate and also a set of front and rear CV-design driveshafts and steel differential outdrives. Using the parts will reduce play, improving precision and thus on-track performance.

Source: Yeah Racing [yeahracing.com]

January 9, 2017

T-Works MT44 aluminium switch button

T-Works have introduced an aluminium switch button for the Sanwa and Airtronics MT44 radio. Designed to replace the standard plastic dial button of Sanwa’s latest intermediate-level transmitter, the button is machined from aluminium and it comes anodised in a range of colours including black, blue, orange and red. Machined silver edges make for improved looks and the buttons come including suitable mounting hardware.

View more images here

January 9, 2017

Boots & Ongaro get The Italian Job done

The 2017 edition of the annual The Italian Job Race was held at the IBR Padova track this past weekend. In the premier Pro Nitro Buggy class it was newly-signed Tekno driver, Alex Zanchettin who took the TQ from the TLR duo of Marco Baruffolo and Renaud Savoya. Elliott Boots and Riccardo Berton (both Kyosho) would complete the top five with Martin Wollanka (Xray), Robert Batlle (Mugen) and Lee Martin (Infinity) coming in sixth to eighth place. The 60 minute main final was then run without top qualifier Zanchettin who ran into issues before his semifinals and so the race for the win was on between Ongaro and Boots. Davide looked to hold the upper hand in the opening stages but fading shock absorbers would lead to several mistakes by Ongaro, allowing Boots to take the lead while Marco Baruffolo was able to take profit of Ongaro’s issues and so the TLR driver was able to take the second spot some 20 minutes from the end. Up front, Elliott Boots brought home the win with Marco Baruffolo in second and Davide Ongaro in third.

View the Pro Buggy and E-Buggy results here

January 9, 2017

Dakotah Phend sweeps CRCRC Winter Midwest Champs

The 30th annual CRCRC Winter Midwest Championships were held this past weekend at The Ohio R/C Factory with over 330 race entries for the usual mix of 1/10th electric Modified and Stock off-road classes. TLR’s Dakotah Phend would top seed in 2WD Mod Buggy while Kyosho’s Jared Tebo went quickest in 4WD Mod Buggy and Mod Truck as Ryan Cavalieri (Team Associated) top seeded 2WD Mod SCT. After the qualifiers things looked a bit different up front as Dakotah had shifted into second gear to top qualify 2WD Mod Buggy, 4WD Mod Buggy and 2WD Mod SCT while Jared Tebo was quickest in Mod Truck. Elsewhere Aaron Korhmann TQ’d 4×4 Modified SCT.

Continue reading the report here

January 9, 2017

Samix T4’17 matte-finish 2mm carbon fibre upper deck

Following the introduction of the 2.25mm matte-finish carbon fibre lower deck, Samix now also released information on the respective upper deck. The top plate is cut from high-quality sheet material, it sports a matte surface finish to match Samix’s main chassis plate and it is a direct replacement for the kit’s glossy finish part.

Source: Samix [rcsamix.com]

January 8, 2017

Samix T4’17 2.25mm carbon fibre main chassis

Coming from Samix and made for Xray’s T4’17 touring car is a 2.25mm carbon fibre main chassis plate. Cut from high-quality matte-finish carbon fibre the chassis is of a near fully symmetrical design with a mirrored under-motor cut-out for equal left-to-right flex characteristics. Included with the chassis comes a black anodised add-on aluminium motor fan mount for 40mm fan units.

View another image here

January 8, 2017

Arrowmax sign Simon Kurzbuch

Arrowmax have announced the signing of reigning 1/8th Nitro On-road World Champion, Simon Kurzbuch to their factory team. The Swiss Shepherd driver will use Arrowmax’s full line of tools and accessories to build, maintain and setup his rides in the 2017 season and he has the following to say:

I want to thank you and Arrowmax for the opportunity to using your awesome tools and accessories. I absolutely like the black/gold edition which gives the tools and your working place an amazing look.

Source: Arrowmax [arrowmax-rc.com]

January 7, 2017

Highest D1000 HV all-aluminium servo

Highest have introduced the new high-voltage compatible D1000 servo with all-aluminium case. Capable of speeds down to 0.08s and offering a dynamic torque of 14.8kg-cm the coreless motor standard-size servo is ideal for off-road applications and a popular choice of Highest team drivers such as David Ronnefalk and Robert Batlle. The search offers a full-aluminium case including upper and lower case as well as the middle section and it is available now.

View the specifications here