December 7, 2015

Philipp Walleser wins at MRCL Winter Series Rd2

Philipp Walleser wins at MRCL Winter Series Rd2

Round 2 of the MRCL Winter Series was held in Longwy and in the 10.5T Touring Stock category it was Philipp Walleser who grabbed the pole position for the triple A-mains with the round TQ in the third and final qualifier. Behind him Michael Kiesewetter and Alexander Becker lined up in second and third respectively. In the finals Philipp, who had just ended a year off from RC, took win in the first and second leg to grab the overall win early. Thomas Stenger would end the day on the runner-up spot with Michael Kiesewetter rounding out the top 3 result.

Source: HRC Distribution [hrcdistribution.com]


December 7, 2015

Alexander Hagberg wins high-class Slovakia Cup Rd3

Alexander Hagberg wins high-class Slovakia Cup Rd3

The third round of the Slovakia Cup was held at the Hudy Racing Arena in Trencin, Slovakia this past weekend. With the opening round of the 2015/16 ETS taking place at the iconic venue in only one week time, both national and international drivers used the event to get some last minute practice, making for a total of 97 entries for the weekend. In the Touring Modified class Xray’s Alexander Hagberg would dominate the proceedings by taking the TQ and the win from Martin Hudy (Xray) with Germany’s Dionys Stadler (Xray) rounding out the top 3 result.

Continue reading the report here


December 7, 2015

Azri Amri wins at SIS Year End Race

Azri Amri wins at SIS Year End Race

Sunter International Speedway in Jakarta, Indonesia played host to the SIS Year End Race with more than 70 drivers in attendance in the three classes of Touring 13.5T Boosted, FWD and Mini. In the 13.5T Boosted category the race for the TQ was on between Azri Amri and Bowie Ginting with both scoring round TQs on Saturday and they were tie on points going into the final qualifier on Sunday morning. A very fast run saw Bowie taking the final round TQ and with it the pole position for the triple A-mains with Azri putting his car on the two spot. Suwardi Suliandy and Peter Anthonisz would round out the top 4 result.

Continue reading here


December 7, 2015

Max Mächler wins Touring Stock class at Charity Race

Max Mächler wins Touring Stock class at Charity Race

The annual Charity Race was held this past weekend at RC Landia in Scandiano, Italy. As usual the race attracted the some of the fastest Italian drivers to compete against guests from abroad and in the 13.5T Touring Stock class it was Germany’s Max Mächler (Awesomatix) who would be in control of things by taking the overall TQ from Riccardo Rabitti and Gabriele Berselli (Xray). In the opening A-main Max would score a clean win some four seconds on front of Nico Catelani (Yokomo) and Riccardo. A2 and it was Nico who would come out fastest from Riccardo while Max only finished in 4th place meaning the third and final leg would bring the decision for the day’s win. Scoring the fastest lap in the finals, Max soon made his intensions clear to bring home the win in A3 and at the end he would come out successful some three seconds in front of Riccardo and Nico to grab the 13.5T Touring Stock title from Nico Catelani on the runner-up spot while Riccardo Rabitti rounded out the podium in third.

Image: Max Mächler


December 7, 2015

Spec-R MF-01X aluminium diff gear cross shafts

Spec-R MF-01X aluminium diff gear cross shafts

Spec-R have an aluminium diff gear cross shaft set for the Tamiya MF-01X available. Made from high-quality material and coming blue anodised the shafts weigh in at only 6.7g compared to the 19.6g of the original steel shafts. This greatly reduces the rotational mass of the drivetrain for quicker spool up, improved braking and longer run times.

Source: Spec-R [spec-r.com]


December 7, 2015

MIP 1/10th off-road Roller Pucks drive system

MIP Rollers Puck Drives for 1/10th off-road vehicles

During last weekend’s final of the 2015 JConcepts Indoor National Series MIP have shown us their all-new Roller Pucks drive system. Building on the design of MIP’s popular Pucks drive system, the design revolves around 360 degree rotatable bushings that can move freely inside the driveshaft bone while also being able to rotate independently of the pin that captures them. This, together with a clever material mix makes for greatly improved wear characteristics compared to the composite Pucks system. The system was specially designed for Modified class racing and it replaces the standard outdrive and drivepin assembly with a construction that is much less prone to wear while being easier on the wallet as only the metal pucks need to be replaced once they start to wear whereas the standard “narrow drive pin” design make the replacement of both the driveshaft and outdrive necessary. The Rollers Puck system is fully compatible with MIP’s Pucks and 17.5 Aluminum Pucks drive system meaning the plastic parts can easily be replaced with the Roller Pucks hardware set although the somewhat delicate aluminium drives are only recommended for the use in 17.5T buggy. The MIP Roller Pucks drive systems will soon be available for all popular 2WD and 4WD buggies as well as for many trucks.

View more photos here


December 5, 2015

VBC Racing Wildfire D08 touring car kit

VBC Racing Wildfire D08 touring car kit

VBC Racing have introduced the latest incarnation of the Wildfire touring car, the D08. It is based off of the successful D07, adapting most of its features although subtle revisions will make for a more versatile, more durable and even faster car. The D08 builds on a redesigned 2.25mm carbon fibre chassis with minimal cut-outs, providing totally new flex characteristics with the chassis being able to torsionally flex throughout its entire length and not just in the middle of the car, resulting in higher corner speeds and more confidence when going through the corner.

Continue reading here


December 5, 2015

Tesla All-in-one tool box

Tesla All-in-one tool box

Coming from Tesla is the All-in-one tool box. Made form strong fabric and offering inner reinforcements the box makes for convenient transportation of a range of tools and accessories including engines, setup tools, spares and more. An inner compartment with elastic loops takes tools and wrenches meaning no extra bags are needed. Made from black material the bag sports white welting and printed Tesla logos.

View more photos here