Avid introduce 1.5mm carbon fibre arm inserts for the HB D413 1/10th 4WD buggy. They offer the buggy another great tuning feature by reducing the flex and twist in the arm. It is common to fine tune the response of the vehicle by placing them just on the front or rear or on both ends and thus the drop-fit inserts are available as separate front and rear sets and as combo set as well.
Click here to view more photos
Avid introduce their 7075-T6 aluminium chassis for the Xray T4’15 touring car. Designed for the use in medium to high-bite conditions the main chassis, cut from 2mm high-quality aluminium, offers several unique features. Compared to Xray’s own alloy chassis the Avid part has several cutouts added and existing diff cutouts enlarged to reduce weight and increase flex while keeping enough material on the sides for the speedo to hold with servo tape. The battery tape on the bottom of the chassis has a cutout slot so it does not interfere with ride height checks or drag on track. The motor pocket width is decreased and is double pocketed to keep as much strength possible. The motor mount flex control hole as been modified with a large bevel on top of chassis to prevent the screw head from hitting chassis while the pinion adjustment hole moved to better access the set screw. The 2mm thickness material also allows for a lower centre of gravity and offers the ability to lower roll centres more than stock. The chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering with the chassis being narrowed to 84mm allowing the chassis to roll deeper through a corner.
Click here to view more photos
Avid have a new vented motor plate for the Team Associated B5 and T5 as well as pink 17mm Triad wheelnuts available. Starting with the motor plate, the part is made for the use with the B5 and B5M buggies as well as the new T5M truck and it helps to scrub weight while allowing hot air and dirt to get out of the gear cover. The 48 degree angled vents are placed to remove material above the motor, yet still maintain a rigid motor plate to keep gear mesh consistent. The part is fully CNC-machined from 6061-T6 aluminium and it comes black anodized with chamfered edges for that luxury look.
Click here to continue reading
Avid’s Avert aluminium spring cups for the Team Associated B5, B5M and B44.3 are a direct replacement for the standard plastic cups and they are of a unique angled slot design to prevent them from coming off in demanding conditions. They also fit snug on the shock eyelet to help prevent shock shafts from pulling out of the plastic shock end. The cup’s dimensions resemble the +5 Associated parts, they are machined from black anodised 6061-T6 aluminium material and come in packs of four including an Avid mini decal sheet.
Source: Avid [avidrc.com]
Avid introduce the Triad M4 wheel nuts for the use with most 1/10th scale vehicles. The lightweight nuts weigh in at only 0.3g per piece and although they sport a unique 3-corner design they can be cranked down with force when a good quality nut wrench is used. Serrations ensure the nuts stay in place while the available colours of black, blue, orange and red let you highlight your drive. The nuts come in sets of four including an Avid mini decal sheet.
Click here to view the colour variants
Available now from Avid is the hard-anodised aluminium chassis set for the HB D413. Born from a winning pedigree, Avid’s IFMAR World Champion winning B44.2 aluminium chassis, the HB part is further refined by lowering the ballast weight even more into the chassis, oversized chamfers on the bottom corners for increased stability during those inevitable chassis dragging moments, and an optional floating servo mount allows the chassis to twist equally left to right. Included with the set comes the 7075-T6 chassis, one delrin and one aluminium ballast weight, a carbon fibre battery stop, an Upgrade RC chassis protector, and an Avid decal. Additional 3g delrin, 7g aluminium, or 21g brass inserts are sold separately for more tuning options.
Click here to view more photos
Avid’s new B5/B5M battery thumbwheels are a direct replacement for the stock blue parts found on Team Associated’s latest 2WD buggy. They are of a very lightweight design with the two Avid parts equalling the weight of a single stock thumbwheel and they also up the visual appearance of the buggy with their black anodising and laser etching. Included with the parts come two O-rings and mini decal sheet.
Source: Avid [avidrc.com]
Avid’s popular wing mount buttons are now also available in a red colour version. Offering a low profile design the CNC-machined aluminium parts sport a large diameter to keep 1/10th buggy wings as well as highly stressed touring car wings in place even at high speeds which results in improved aerodynamic efficiency. The red anodised buttons come laser-etched and work on all cars with M3 wing mount screws.
Source: Avid [avidrc.com]
