Red RC » Avid RC

June 4, 2013

Avid B44.2 aluminium centre cap

Avid B44.2 aluminium center cap

Avid’s new B44.2 aluminium centre cap is a fresh take on the design which keeps your chassis secure and makes the car easier to work on. The design eliminates 4 screws for the original cap and instead directly links the front and rear upper decks with taper mounts that key into the upper decks. The added benefit of this design is that maintenance is simplified, when you only remove 4 screws and the entire upper deck assembly is loose for easy slipper clutch removal.

View more images of the centre cap here

June 1, 2013

Avid aluminum ballstud washer set

Avid have have released their take on a traditional aluminium ballstud washer by introducing a staggered outer diameter so you can easily tell what thickness of washer you are running. As the washers grow in thickness, the outside diameter grows in steps of 0.5mm. Replace the plastic washers that come in your kit with these precision machined aluminum washers which won’t crush and change thickness when clamped. A set includes 12 pcs, 4 of each thickness 2.0, 1.0, and 0.5mm.

View the washer stagger here

May 30, 2013

Avid RC TLR22 Triad aluminium topshaft

Avid RC’s new Triad aluminium topshaft is an upgrade for the TLR 22, 22T and 22 SCT to eliminate the special ‘mini’ kit slipper nut and use a standard 5.5 mm hex driver to set the slipper clutch. Born partly for necessity, partly for convenience, racers will appreciate this upgrade as they can go back to using a standard slipper nut. Many Triad customers had issues with TLR topshafts which fluctuated in length and did not allow for proper spring tension on the slipper clutch, this shaft aims to solve that.

Source: Avid RC [avidrc.com]

May 16, 2013

Avid XB4 machined 2+2 shock pistons

Avid introduce these 2+2 hole shock pistons for the Xray XB4 buggy. They are machined for best possible precision and feature a 2+2 hole design to fine-tune high speed and low speed damping separately. Available are two variants with 1.5mm/1.1mm and 1.6mm/1.1mm holes. The pistons help provide the traction and bump handling of running lighter shock oil or larger piston holes, while still maintaining the control of running heavier oil or smaller hole piston when taking on jumps.

Source: Avid [avidrc.com]

May 9, 2013

Avid Triad clutch red slipper pads

After testing for the past few months at the KO Grand Prix, Reedy Race, and Cactus Classic, Avid is releasing their new red aggressive slipper pads. The red slipper pads are a new material which engages faster and gives a more direct clutch response. Now you can fine-tune your clutch by running a combination of white and red pads depending on the vehicle, motor and surface. Sold in a set of 3 pads.

Source: Avid [avidrc.com]

April 22, 2013

Avid Triad B44.2 clutch spacer

Avid introduce the Triad B44.2 spacer to allow the use of the Triad slipper clutch in the latest Team Associated B44.2 buggy. As B44.2 bulkheads are shifted 6mm farther apart the spacer goes behind the Triad slipper to compensate the longer slipper shaft from a B44.1 to a B44.2. The Triad clutch is meant to calm the car down and gives a smoother throttle feel than the kit VTS item for added setup possibilities.

Source: Avid [avidrc.com]

April 18, 2013

Avid B44 chassis set & option parts

Avid announce new option parts for the Team Associated B44.2 and B44.1 buggy. Available soon is a 2.5mm machined aluminium chassis kit for the B44.2 buggy that adds 55g of weight while making for a lower centre of gravity at the same time. It is cut from 7075 aluminium, comes hard anodised and laser-etched with the reduced chassis flex making for increased steering and a more predictable handling. Included in the set are a 9g aluminium and a 3g delrin weight as well as an Upgrade RC chassis wrap. The weight ballast pieces are also available separately to add additional weight if needed. Beside the low and medium weight parts also a 21g steel weight will become available. B44.1 owners will also come into the favour of using the new alloy chassis by using the B44.1 +8 upgrade package. The set includes battery trays, battery staps, a rear centre CVA bone and an Avid +8mm carbon fibre top deck beside all needed hardware.

Click here to view the other new parts

March 28, 2013

Avid RC shorty battery foam set

Avid RC’s new shorty battery foam set is the perfect compliment for racers running the lightweight shorty battery packs in their B4.2 and T4.2. The set includes 2 large, screen printed foam blocks with perforated cut lines which allow for a mid and offset battery location. Also fits older versions, B4, B4.1, T4, T4.1.

Source: Avid RC [avidrc.com]