Red RC » Bezerk RC

August 1, 2018

Bezerk RC carbon fibre motor spacer

Bezerk RC have announced the release of their new carbon fibre motor spacer. The part is machined from high-quality 3.0mm carbon fibre but any other thickness is available upon request. Two holes are countersunk, 2.0mm and above thicknesses, to allow owners to attach it to the motor, making mounting of the while assembly much easier. These spacers are useful on pan cars to balance your rear pod, or on the MG Evo to allow better motor clearance.

Source: Bezerk [bezerk.com.au]

June 14, 2018

Bezerk CK25 asphalt chassis

Coming from Bezerk RC is an asphalt-specific carbon fibre chassis for the CRC CK25 1/12th scale pan car. Designed for low to medium grip levels the main plate offers more flex while the geometry is kept the same but Bezerk reduced the width in many areas, front, mid and rear. The large front window adds more steering and overall added flex improves grip at both ends. Made from 2.5mm carbon with a traditional weave the chassis weighs in at just under 49g. The main plate only suits the conventional servo position and like all Bezerk products it can be customised to suit special needs.

Source: Bezerk [bezerk.com.au]

June 13, 2018

Bezerk P10 plus 10mm carbon fibre chassis

Bezerk RC has introduced an option chassis for the Roche P10 pan car. The chassis has 10mm added to the wheelbase to aid in high speed stability and the design supports a centrally mounted shorty battery. The pack has been lowered 2.5mm into the 3mm chassis to lower the centre of gravity to give a better change of direction while the 3mm chassis adds some stiffness over the whole chassis to give a precise feel on track. In addition the servo position has been moved over 1.5mm to better centre some servos. Like all Bezerk products the chassis can be customised to suit the driver’s needs.

Source: Bezerk [bezerk.com.au]

April 11, 2018

Bezerk RC RX-10SR carbon fibre top decks

Available now from Bezerk RC are two carbon fibre top decks for the Destiny RX-10SR touring car. Coming in a standard and a split-type design, the top decks are available in 1.6mm, 1.8mm and 2.0mm carbon fibre for added tuneability in combination with carbon fibre or alloy lower main plates.

Source: Bezerk RC [bezerk.com.au]

March 27, 2018

Bezerk EB410 wing riser 3mm & 5mm

Coming from Bezerk RC are 3mm and 5mm carbon fibre rear wing risers for the Tekno EB410 buggy. The part raises the rear wing up to improve tyre clearance, improve the amount of air that flows over the wing and supports the wing to improve its longevity. The risers are available separately or as complete kit including one 3mm and one 5mm riser.

Source: Bezerk [bezerk.com.au]

January 8, 2018

Bezerk RC M07 lowered shock tower set

Coming from Bezerk RC and made for the Tamiya M07 FWD mini are lowered carbon fibre shock towers. The standard towers are great for the intended 60D tyres but testing has found they were not ideal for smaller 55mm diameter rubber. Bezerk’s towers will give more ride-height to play with whilst still allowing enough up-travel. The towers come as set and are both made from glossy 3.0mm carbon fibre.

Source: Bezerk RC [bezerk.com.au]

January 2, 2018

Bezerk RC YZ-4 SF slipper eliminator

Coming from Bezerk RC and made for the Yokomo YZ-4 SF is a slipper eliminator. The set includes parts to do away with the slipper clutch in favour of a fixed, simpler driveline which makes for a lighter drivetrain for stock racing classes. The design allows to use standard “on-road” 48 pitch or 64 pitch spur gears and included in the set are the parts marked in red, a spur gear plate, a small spacer, a stepped spacer to fit just inside the bearing and a spacer to replace the spring.

Source: Bezerk RC [bezerk.com.au]

November 20, 2017

Bezerk RC EB410 carbon fibre option parts

Coming from Bezerk RC and made for the Tekno RC EB410 buggy are front and rear carbon fibre shock towers and two centre diff plates. The shock towers are machined from heavy duty 4.0mm material and made to match the standard geometry but are slightly reshaped to add overall strength. As for the centre diff plates, they are cut from 2.5mm material and come in a standard variant or with additional mounting holes for a 30mm fan unit. In addition all parts can be customised by the customer to make them more unique.

View the other new parts here