Red RC » Bezerk RC

November 1, 2017

Bezerk RC B64 top decks, shock towers & steering plates

Bezerk RC have introduced a range of carbon fibre option parts for the Team Associated B64 range of buggies. First is a carbon front topdeck in solid heavy duty or a light version. Both are made using quality 2.5mm carbon fibre and they come with a neat spacer to fit underneath the front section for better support when tightening. The decks are countersunk at the front to accept the standard screws. Next are middle camberlink length option towers in a single standard front height, and three rear options of tall, standard height and high roll centre. Lastly are the 0/6 degree steering plates. Bezerk have had 3/9 deg variants available for some time and the new option fits nicely in-between, giving racers every step needed in two steering plates. Every 1mm added to the rack subtracts 1 degree, so racers have everything from -2 deg to 9 degrees of Ackermann adjustment.

View the other new parts here

September 20, 2017

Bezerk RC BD8 rear carbon fibre chassis brace

Bezerk RC have introduced a rear carbon fibre chassis brace for the Yokomo BD8 touring car. Made from 4.0mm carbon fibre, it is shaped to clear both the spur gear and the rear toe control system and testing has reported a more consistent, stable and easy to drive car.

Source: Bezerk RC [bezerk.com.au]

June 16, 2017

Bezerk RC B64 slipper eliminator

Bezerk RC have introduced the slipper eliminator for the Team Associated B64 and B64D. Designed to reduce rotating mass and enable smaller spur gears to be fitted for stock racing, the carbon plate accepts any on-road style spur gear that has a three screw fitment. The kit includes two anodised 6061 T6 alloy housings and one carbon plate to screw the spur gear to. The holes in the carbon plate are sized to just screw your favourite screws straight in, no tap required. The slipper eliminator set is a limited edition and available now.

View more images here

February 27, 2017

Bezerk RC B64 carbon fibre option parts

Bezerk RC have introduced a range of carbon fibre option parts for Team Associated’s all-new B64 1/10th 4WD off-road buggy. First up is a carbon battery strap made from 2.5mm material and pocketed to reduce weight, making it lighter than the plastic one it replaces. Also new are remodelled shock towers in two thicknesses, featuring the standard geometry. Next up are Ackermann plates in varying angles from standard to three degrees while Bezerk RC’s servo brace has been simplified to clean up the appearance by removing the mostly unneeded aerial holder.

Continue reading here

November 18, 2016

Bezerk RC A800 carbon fibre rear body mount

Berzerk RC A800 carbon fibre rear body mount

Bezerk RC have a new carbon fibre rear body mount for the Awesomatix A800 touring car available. The part is made from high-quality 3mm sheet material and both lighter and stronger than the original item. It is designed to survive a few off track excursions and hold its shape in the process.

Source: Bezerk RC [bezerk.com.au]

July 18, 2016

Bezerk RC B6 series carbon fibre option parts

Bezerk RC have introduces some new parts for the Team Associated B6 and B6D platform. First up are two front shock towers for the flat front arms. Both are cut from 4mm carbon fibre, offing a refined shape for increased strength with a standard and a half-hole version being available – the latter making for finer adjustments of the shock angle.

Continue reading here

April 19, 2016

Bezerk RC XB2 Dirt Edition option parts

For those that are running Xray’s XB2 Dirt Edition 2WD off-road buggy in less-than-ideal conditions, Bezerk RC have introduced two new option parts to fine-tune the buggy for lower grip and bumper track conditions. First up is a 2.5mm carbon fibre chassis that provides a healthy weight saving for Stock racers coming in at 87g while providing some extra flex if track conditions call for it. Also new is a lower tower to add much needed droop to the rear. This increases rear cornering grip and aids in bump handling ability. The tower has been lowered 5mm and geometry corrected so the shock angles remain the same. Made from 4.0mm carbon fibre the tower also looks good while adding strength at the same time. Other heights are also available for those that are in need of in-between sizing.

View the rear shock tower here

April 4, 2016

Bezerk RC XB2 carbon towers

Bezerk RC introduce these carbon towers for the Xray XB2 Dirt Edition. The front tower features standard geometry, but has increased material for crash protection and is made from 4.0mm glossy carbon fibre for added strength. The rear tower also features standard geometry and aims to be stronger thanks to the 4.0mm carbon fibre.

View the front tower here