Red RC » Creation Model

December 5, 2024

Infinity IF18 Sway Bar Stoppers

Infinity has released new Sway Bar Stoppers for the front stabiliser on its World Championship winning IF18-3 1:8 Onroad Car. By making the contact surface with the bearing spherical, smoother movement of the sway bar is achieved. Durability has also been greatly improved by using steel. The Stabiliser Stoppers available in 2.3, 2.5, and 2.7mm. Also new from the Japanese manufacturer is a new Steering Knuckle Plate for their IF15-2 and IF15-2W. This allows for a greater steering angle of the outer tire in corners than the standard kit version. This will make tighter cornering possible, and can improve high speed steering on larger tracks.

View IF15-2 Steering Knuckle Plate here

November 21, 2024

Leino Top Qualifier at 1:10 Nitro World Championship

12 years after he took pole position at the IFMAR 1:10 Nitro World Championship at Bangkok’s other famous circuit RC Addict, Teemu Leino is once again the Top Qualifier at the nitro touring car category greatest race, this time at the challenging Huge RC Circuit. The Infinity driver was the only one who could repeat a TQ run over the 6 rounds of qualifying at the 10th running Worlds, but it was his team-mate Naoto Matsukura who officially sealed the deal for the veteran Finn. Running in the second fastest heat alongside Toni Gruber, Leino’s only remaining challenger for the top spot, and having shown promise of TQ pace with a P3 in the penultimate round, the 2018 Champion denied Gruber the TQ run he needed. Matsukura’s run would turn out to be the Q6 TQ time, none of the drivers in the top heat able to better his time, as he became the 5th different driver to TQ a round. Also in heat group 5 of 6, it would be 2022 Finalist Chavit Saligupta and 2012 Champion Meen Vejrak that completed the Top 3 for the closing round. Overall, Gruber would conclude qualifying in P2 and together with Dario Balestri, Jilles Groskamp and Saligupta would go into Super Pole to battle for the other direct position into Saturday’s 1-hour main alongside Leino. With each driver getting 6 laps to set a time, that shoot out would go to Groskamp who put down the fastest lap by 0.043 of a second from Gruber. Gruber will line up on pole for the Semi while 1:8 World Champion Balestri will lead away the other 30-minute encounter, the Super Pole favourite having a rough number of laps over his 6 attempts and slowest if the four contenders. After topping seeding but only managing one Top 5 qualifying run, defending Champion Tadahiko Sahashi just made the Semi Final cut and joins Balestri in his Semi lining up P7.

Continue reading here

November 21, 2024

Mongkolphan takes penultimate qualifier in Thailand

Thai driver Game Mongkolphan claimed a surprise TQ run in the penultimate round of qualifying at the IFMAR 1:10 Nitro World Championship as he became the fourth different driver to top the times at the challenging Huge RC Circuit in Bangkok. A finalist when the track hosted the same World Championship 10-years-old Mongkolphan would take Q5 from Capricorn’s Toni Gruber with former World Champion Naoto Matsukura finally producing a strong run to complete the Top 3 ahead 2022 finalist Chavit Saligupta. A driver who was capable of wrapping up the overall TQ with one round to go it wasn’t to be for Q3 & 4 winner Teemu Leino, the Finn struggling with his set-up in the fifth round. Fastest in Q2, Dario Balestri found himself with a P5 for the round.

Continue reading here

November 21, 2024

Leino first to double in qualifying in Bangkok

12-years ago he was the Top Qualifier when Thailand hosted the World Championships for the first time and now this morning as the country hosts the 1:10 Nitro’s biggest race for a fourth time, Infinity driver Teemu Leino has kicked off Day 2 of qualifying as the first driver to deliver a second TQ run and move in on pole for Saturday’s final. With Day 1 of qualifying seeing a different driver at the top each round it was the Finn who closed yesterday’s action by topping Q3 and this morning he has pick back up where he left off to top Q4 from the Capricorn of Toni Gruber who opened qualifying at the 10th running of the World Championship with the fastest time. Overall it was a good round for Italian manufacturer Capricorn, a huge improvement from 2012 World Champion Meen Vejrak would see the Thai driver get a P3 for the round ahead of Q2 winner Dario Balestri and Swede Viktor Wilck.

Continue reading here

November 20, 2024

Balestri just edges out Leino to take Q2 in Bangkok

Dario Balestri has taken the second round of qualifying at the 1:10 Nitro World Championship after just edging out Infinity team-mate Teemu Leino in the closing laps of the 7-minute encounter. After both himself and Leino DNF’d the opening qualifier, both drivers needed to get their first points on the board. With Toni Gruber, who took everyone by surprise with his TQ in Round 1, having a slower Q2, and second fastest man Jilles Groskamp unable to start after suffering an engine failure in the warm-up for his second quali run, it was Leino who lead out the top heat. However, hitting traffic at the end of the run as Balestri set his fastest lap on his penultimate lap it was the Italian who took it by 13/100ths of a second from the Finn. Behind the Europeans Australia’s Jessie Davis bettered his Q1 P6 with the third fastest time with Francesco Tironi again in the mix at the front after his opening P3 effort. While Gruber would set the 6th fastest time for Q2 the Capricorn driver would have his time deleted as his rear wing was deemed to be too high in post tech inspection.

Continue reading here

November 7, 2024

Infinity IFB8 Lightweight optionals

Infinity has released two lightweight optionals for their IFB8 1:8 Nitro Buggy. Machined from 7075-T6 alloy and featuring a hard coating, the CVA Cup Shaft lightweight design make them 4.3 grams compared to the steel version’s 8.3 grams allowing you to save weight and achieve maximum performance. It can also be installed on the rear hub providing additional support, which is recommended for high-grip and fast tracks. Also made from 7075-T6 alloy, lightweight Diff Cross Shafts each weigh 0.65 grams allowing you to cut weight from your transmission and achieve maximum performance. It can be installed on all the differentials of your vehicle.

View Diff Cross Shafts here

November 5, 2024

Infinity IF15-2 Light Weight Alu Center Bulk Set

Infinity has released this Light Weight Aluminium Center Bulk Set for their 1:10 Nitro Onroad offerings the IF15-2 and IF15-2W. The use of 7075-T6 material and its slim profile make it both lightweight and highly rigid. Securely fastens the main chassis to the upper deck for more stable running on all surfaces.

Source: Creation Model [creationmodel.net]

October 27, 2024

Kato successfully defends Japanese 1:8 Buggy title

Infinity’s Kouki Kato has successfully defended his JMRCA 1:8 Offroad Japanese National title, the 18-year old winning the title race at the Futaba Buggy Track located in Ichihara, Chiba. Joining Infinity’s offroad program in July and winning the Asian Buggy Championships Finale in Indonesia last month, Kato would put his IFB8 top in all four rounds of qualifying to secure the overall TQ. His closest challengers would be 2022 Champion Yusuke Sugiura and 2024 1:10 4WD Buggy National Champion Yui Kaino, both drivers counting two P2 runs each to tue on points. It would be Sugiura however who secured his direct spot into the half hour final on the tie-breaker. Winning his 20-minute Semi Final Kaino would line up third the Main, this being his first nitro buggy event. While Sugiura’s Kyosho would lead in the early laps, once Kato got back to the front he was able to hold station setting the fastest lap of the race to win by 13-seconds from Sugiura. Almost a lap down, Kaino’s Team Associated would complete the podium.

Source: Kouki Kato [Facebook]