Red RC » Exotek

January 19, 2015

Exotek D413 aluminium chassis & shock parts

Exotek Racing have new option parts for the HB D413 1/10th scale 4WD buggy available in the form of aluminium wing mounts, an alloy diff cap and a spring perch set. Starting with the wing mount set, the sturdy looking parts are CNC-machined from 7075 aluminium and they offer a lightweight design to minimise weight gain. They are designed to use low-profile M3 screws to mount the wing and they allow to run high and low wing positions by simply rotating them by 180 degrees. Included with the factory orange anodised parts are four M2.5 tower bolts for easy installation.

Click here to continue reading

January 9, 2015

Exotek DEX210 alloy 12mm hex set & MM wing mounts

Exotek have new option parts for the Team Durango DEX210 buggy available in the form of a 12mm aluminium hex set and alloy wing mounts for mid motor converted buggies. Starting with the wheel hex adapter set the precision machined parts are of a clamping design and made for the use on the rear of the DEX210 2WD and the front of the DEX410 4WD buggy. They allow the use of industry standard 12mm hex wheels such as the ones from Team Associated, TLR or the pre-glued Schumacher EOS handout wheels. The hex adapters come gold anodised, in sets of two and including 1.6mm hard steel pins and 2mm screws.

Click here to continue reading

January 6, 2015

Exotek TLR 22-4 rear camber block & front tower

New from Exotek for the TLR 22-4 4wd buggy are a new rear camber block and front shock tower. The rear camber block has been made from heavy duty machined 7075 and they have added 2 additional and important higher roll centre mounting points at the bottom of the camber mounts. The new lower mounting points are excellent for freeing up the buggy at the rear for more mid corner steering but also increased on power traction and stability. The front shock tower has been made from stealthy matte finish 5mm thick carbon fibre. Much stiffer and stronger for consistent damper action yet still light weight due to its extra machining and the wide open shape allows air to pass through for better body aero. The one piece shock tower eliminates the lower camber mount for improved durability and uses flat head screws for better shock tower alignment onto the bulkhead.

View more images here

December 19, 2014

Exotek B44.3 aluminium front bulkhead

Exotek B44.3 aluminium front bulkhead-1

From Exotek comes an aluminium front bulkhead for the Team Associated B44.3 buggy. Machined from 7075 material the part incorporates two rubber arm bushings that help protect the front factory arms from cracking. The bushings coned shape holds the arms firmly in place but compresses down to absorb hard forward hits and the sleeved rubber portion dampens the arms and hinge pins further. The bulkheads also fits the B44.2 and it comes blue or black anodised and laser-etched.

Click here to view more photos

December 13, 2014

Exotek Mini 8ight-T carbon & aluminium option parts

Exotek introduce new carbon fibre and aluminium option parts for Losi’s Mini 8ight-T off-road truck. First up is the carbon bottom plate set that includes a 2.25mm thick main chassis plate and a heavy duty machined alloy nose plate. The main chassis offers a sleek factory carbon look and a lighter weight while the machined motor area allows the use of some larger diameter motors. In combination with Exotek’s 8ight-T servo mounts a larger 1/10th low-profile servo can be used for extra steering performance while the new optional shorty battery blocks help to fit 2S LiPo shorty battery packs. Included with the set comes mounting hardware and a decal sheet and the set can be used with the stock top plate or Exotek’s optional top deck.

Click here to continue reading

December 10, 2014

Exotek TLR 22 alloy motor plate & front camber block

Exotek have two new aluminium option parts available for TLR’s 22 line of vehicles. First up is the Flite motor plate, a fully CNC-machined part that is of a vented design to keep the motor running cooler and longer for that extra edge. Aggressive cut outs allows the heat that builds up inside the gear cover to vent out thus lowering overall motor temps greatly. The extra machining reduces the weight down to 14.5 grams, making it 6 grams lighter than stock, but the critical motor mounting areas are still intact to maintain solid motor mounting and gear mesh. The is intended for the use on indoor clay or carpet tracks, it comes laser etched, polished and anodised in gun metal or limited yellow colour.

Click here to continue reading

December 8, 2014

Exotek F1R2 IFS independent front suspension set

Exotek introduce the F1R2 IFS independent front suspension set that is designed to overcome the very limited suspension travel of standard can car type front suspension. The sweet spot is only about 2mm of travel which means abrupt and non linear car handling. With an IFS suspension the car handling becomes much more linear with real body roll characteristics which means you can drive harder into a corner while maintaining stability and confident road holding performance which translates to improved overall race time results and consistency. The 48 parts set contains all needed parts to convert the front suspension of cars with F104-type front suspension with parameter like droop, ride height, damper angle, spring rate, roll centre, camber and caster all being available from stock or using optional parts. Included are also two pairs of springs; black medium hardness for Ride tyres or low-grip conditions and silver firm springs for Shimizu or TCS tyres and high-grip tracks. The design fits onto the standard F104 bolt pattern but Tamiya type chassis are too narrow for the droop stop screws and the F104 servo mounting will not work. Exotek will work on developing the IFS set next to be able to work with standard Tamiya type chassis.

Click here to view more photos

November 24, 2014

Exotek Mini 8ight carbon fibre & aluminium options

Exotek have announced a range of carbon fibre and aluminium option parts for Losi’s Mini 8ight range of vehicles. First up are 3mm carbon fibre shock towers for the Truggy variant. Stronger and lighter than the original parts the front tower also allow for a more upright shock position for improved jump handling.

Click here to continue reading