Red RC » JConcepts

September 27, 2016

JConcepts Fin Reamer bodyshell reamer

Coming from JConcepts is the Fin Reamer for polycarbonate bodyshells and wings. The custom 0 to 14mm reamer design combines a sharp, durable tip with an aluminium handle which is available in blue and black colours. The handle features an ergonomic shape with finned cuts and tear-drop recessed areas to reduce weight and add an important lustre to the design. The reamer tip cover is a moulded plastic component built just for the design and application. The stacked piping on the cover packs a look but also serves as a grip for the on and off process. The handle also has an end cap which includes the JC logo.

View the black colour reamer here

September 23, 2016

JConcepts B6-series Finnisher aluminium wing buttons

JConcepts have introduced the B6-series Finnisher aluminium wing buttons. The machined aluminium design with durable outer rim and stylish inner hex design offers a bit more security over traditional plastic wing buttons with the design incorporating through-holes and notched hexes which make it incredibly lightweight but strong in all the important areas. The attachment area has an already built-in countersunk feature which allows for the cleanest assembly possible. The wing buttons are available in blue and black anodising.

View more images here

September 16, 2016

JConcepts YZ-2 S2 buggy bodyshell

JConcepts’ popular S2 bodyshell is now also available for the Yokomo YZ-2 2WD buggy. Featuring a low centre of gravity design the S2 assists fast corning on high-bite surfaces while offering plenty of downforce thanks to a progressive cab design that also makes for best possible steering while maintaining exceptional overall balance. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate 3 and 4 gear lay-down transmission layouts as well as the “dirt” 3 gear stand-up configuration, giving all out versatility. The body is available in a regular and lightweight variant including the Aero rear wing.

View more images here

September 15, 2016

JConcepts S1 EB48.3 buggy bodyshell

Coming from JConcepts and made for the Tekno EB48.3 buggy is the new Silencer bodyshell. The body has new elements created for fast and rough terrain driving; the cab is placed in a forward position with a medium rake angle for an aggressive driving feel without sacrificing out-right balance. The forward pods have the necessary height for high capacity batteries with an added scoop, built for cooling access from a forward position. The rear of the pods are built up and include a rear winglet which drops some force on the rear tires. The mid-length cab incorporates a one-piece side window layout and includes a long shark fin off the rear of the cab for side-traction and straight-line tracking ability. At the rear of the cab rest several areas which can be trimmed for air-flow and hot air escape. Just behind the motor area, another escape pocket has been added for increased passage for flow while everything exits the rear in the scoop-like fashion. The sides of the body have a unique step treatment which adds some strength and also a fitted change of direction forming around the chassis side-guards. The Silencer is formed in clear polycarbonate material with protective film and each package includes window mask and detailed decal sheet.

View more images here

September 14, 2016

JConcepts XB2 pre-cut chassis protective sheet

The latest vehicle to receive JConcepts’ chassis protective sheet treatment is Xray’s XB2 buggy. The chassis wrap comes made from tough material and it sports flashy JC graphics while protecting the chassis bottom from becoming damaged or overly scratched when running on very abrasive surfaces. Coming in sets of two the stickers are pre-cut for a perfect fit and included is also a replacement rear skid decal.

Source: JConcepts [jconcepts.net]

September 13, 2016

JConcepts Shorty LiPo storage box

JConcepts have introduced their Shorty LiPo storage box for up to three shorty-type LiPo battery packs. The box has a small footprint which makes it ideal for short trips with minimal amounts of space. The inside of the box is roomy enough for three shorty batteries and cushioned with high-impact foam that takes away stress during storage and transpiration. The foam insert has built-in areas which allow finger tip access top and bottom for that necessary grabby feel. The custom built, black colour storage box has JConcepts.net logos for authenticity and built-in plastic latches for easy open and close operation. Designed for short-term storage and to keep things nice and tidy, the box is not safe for charging or long-term storing Lithium packs.

View another image here

September 7, 2016

JConcepts XB2 S2 bodyshell

JConcepts’ popular S2 1/10th 2WD buggy bodyshell is now also available for the Xray XB2 buggy. Slammed overall height allows the S2 to whisk through the turns with a low centre of mass while the progressive cab design provides plenty of front-end force for balance and steering. A channeled roof directs the flow through the centre of the body while also increasing the rigidity of the cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate the standard, stand-up 3 gear transmission and 4 gear lay-down transmission layouts giving all out versatility. The body is available in a standard and lightweight variant including two Aero rear wings.

View more images here

September 1, 2016

JConcepts Wash Brush tyre cleaning brush

JConcepts have introduced their innovative Wash Brush, a brush purpose built to make tyre washing easier. Tyre washing is a common sight in both nitro and electric off-road racing and it’s common to attach a brush to a re-sealable bucket for repeated pit use; however, it’s difficult to attach the brush. The JConcepts product eliminates the hassle by including the properly built RC brush with hardware and O-rings in each package. Moulded black in colour with JC logo for authenticity, the wash brush is a no-brainer item for the pits and around the track, home and pit area.

View more images here