Red RC » Brand

August 18, 2017

Samix universal clutch bell gear pliers

Coming from Samix are the universal clutch bell gear pliers. They were designed for easy and convenient assembly and disassembly of on-road clutch bells while also allowing to measure clutch bell distance in a range of 0.3mm to 0.7mm. In addition the tool offers a 3 and 4-pin flywheel wrench for off-road-style clutches. The pliers are made of high-quality 7075-T6 aluminium, they come black anodised and including a 2.2mm retaining pin, making it usable for all current Serpent, Mugen, Shepherd, Capricorn, KM Racing and WRC Racing 1/8th and 1/10th nitro on-road kits.

View another image here

August 17, 2017

Yeah Racing T4/BD8 3mm drive belts

Coming from Yeah Racing are 3mm front and rear belts for the Xray T4. The range included a 513T front and a 189T rear belt, both are suitable for the Xray T4 range of cars while the rear variant is also usable with Yokomo’s BD8 kit. Both 3mm wide belts are cut from high-quality, low-drag material for a long-lasting and free-spinning drive train.

View the rear belt here

August 17, 2017

TQ Wire 2-cell charge cable with 4mm/5mm connectors

Coming from TQ Wire is the 2-cell charge wire with 4mm/5mm stepped bullet connectors. 610mm long the charge and balance harness is made using high-quality 12AWG all-black wires, Gold-plated 6-point 4mm/5mm stepped connectors and it utilises an XH balancer plug. The cables are covered in nylon mesh for protection and to keep things nice and tidy.

Source: TQ Wire [tqwire.com]

August 17, 2017

Yeah Racing Traxxas 4WD HD tool steel driveshafts

Yeah Racing have introduced front and rear tool steel driveshafts for Traxxas 1/10th 4WD trucks such as the Slash 4×4 and Stampede 4×4. The heavy-duty driveshafts are made from tool-grade steel for tensile strength while the middle sleeve is machined from high-quality aluminium for a good balance between weight and durability. The sliding-design driveshafts are a direct fit, they come including mounting hardware such as shims, drive pins and wheel nuts and they are available separately for the front and rear and in red or blue anodising.

View more images here

August 17, 2017

RC Maker A800X bellcrank steering limiters

New from RC Maker are bellcrank steering limiter plates for the Awesomatix A800X touring car. They adjust the amount of steering lock by creating a hard stopper for the bellcrank arms, unlike just using the servo end point as a limiter. This prevents unwanted wheel vibrations which scrub corner speed, and cause strain on the servo. Consisting of an asymmetrical design, each plate can be flipped allowing 4 different steering lock angles all the way from 23 to 33 degrees. They are durable and have minimal impact on the cars flex, whilst keeping the steering posts aligned under cornering forces.

View another image here

August 16, 2017

RC Speed Secrets TLR 22 4.0 Ti upper screw kit

Made for the TLR 22 4.0 and 4.0 SR are RC Speed Secret’s new titanium upper screw kits. Made form high-quality Grade 5 titanium and coming in the impressive “Bada Bling” rainbow or cool “Stealth Black” finish, the 42-piece sets will greatly lower the weight of the buggy without compromising strength while adding visual impact at the same time.

View the Stealth Black screws here

August 16, 2017

Yeah Racing CC01 stainless steel centre shaft

Yeah Racing have introduced a stainless steel centre shaft for the Tamiya CC01 kit. Made from high-quality material the steel driveshaft makes the car’s drivetrain virtually bullet-proof, allowing to tackle even the toughest of terrain. The sliding-design driveshaft is a direct fit and it comes laser-engraved for looks.

Source: Yeah Racing [yeahracing.com]

August 16, 2017

RPM Zoomies mock exhaust headers

Coming from RPM are the Zoomies mock exhaust headers. They resemble the massive exhaust headers seen on many 1970’s full-scale cars with the RPM variant fitting a range of 1/18th to 1/10th scale vehicles and body shells. Their multi-piece design allows to mount them upwards, tilted backwards or even downwards and they come in a black or chrome variant. Screw mounting holes makes for secure installation on running vehicles while for display body shells mounting using double sides tape is also possible. The mock exhausts are ideal for VTA cars, monster trucks and many other applications.

View more images here