May 18, 2011

Pro-Line Scrubs 4WD buggy tires & high downforce wing

Pro-Line Scrubs 4WD buggy tires & high downforce wing

More new products from Pro-Line starting with their new Scrubs 2.2” 4WD buggy front tires. Designed specifically for wet/dry clay and hard packed tracks, the Scrubs front tire offers improved steering, handling and forward traction. Featuring an angled bar design for tons of side bite, as well as a V-pin design which will make your buggy track straight as an arrow they are offered in M3, M4 and MC compounds to meet all your track needs. Also new from Pro-Line is a brand new 6 ½” high downforce wing design to fit on all popular 1:10 off-road 2WD and 4WD buggies. Wings significantly affect how your buggy handles in the air and during high-speed/low-speed sections of the track. This wing features Pro-Line’s Smooth Flow Technology, a deck section on the wing that can be cut out allowing air to flow around effortlessly and reducing drag. Track testing has proven this wing to smooth out the handling of twitchy 1:10 buggies, which results in fewer mistakes and faster lap times. Sold in a 2 pack.

View the new wing here


May 18, 2011

Xray shock foam inserts

Xray shock foam inserts

Xray have released these foam inserts for their 1/8th off road shocks that go between the shock upper mount and rubber membrane. The foam prevents membrane collapse and gives slightly more steering and more stability when landing from big jumps. Sold in a complete set of 4.

Source: Xray [teamxray.com]


May 18, 2011

Pro-Line TLR22 & Lazer ZX-5 BullDog shells

Pro-Line TLR22 & Lazer ZX-5 BullDog shells

Pro-Line have released their BullDog shell for the Losi TLR22 in both rear and mid motor configuration. To date, all of the bodies made for this car have sacrificed looks and performance due to the dual motor configuration. If you race primarily in the mid motor or rear motor configuration PL have a body for each of those setups. The new mid motor body also features a large scoop to maximize clearance and air flow to your motor and electronics. The advanced aerodynamic properties and cab-forward styling will improve your buggies performance and turn heads. Pro-Line have also released the BullDog body to fit the Kyosho Lazer ZX-5.

View the other shells here


May 18, 2011

Arrowmax RX8 hollow middle shaft

Arrowmax RX8 hollow middle shaft

Arrowmax have released this new front middle shaft for the Xray RX8. Machined from high quality spring steel, this hollow shaft claims to be lighter and more durable than the kit shaft.

Source: Free Max [freemaxmp.com]


May 18, 2011

Hitec HS-5765MH giant servo

Hitec HS-5765MH giant servo

When it comes to your big RC projects, size does matter, that’s why Hitec engineered the HS-5765MH. This high voltage cousin of the popular HS-5755MG is 2-cell LiPo (7.4V) capable and features heavy duty, metal gears with a 10mm output shaft for the strength you need for the most demanding large scale applications. With 347 oz-in torque, it is tough enough to tackle the biggest RC projects including 1/5th on and off-road vehicles.

Source: Hitec [hitecrcd.com]


May 18, 2011

Exotek TEK-SCT chassis conversion

Exotek have released the ultimate conversion for your Losi Micro SCT or Micro Rally. The set includes a special 1mm small weave carbon fibre top plate and bottom plate for a more scale appearance, while the conversion also lightens the overall truck by 20%. Other features include alloy bolt-in servo mounts, adjustable finned alloy motor mount with sliding 2 piece design and adjustable position battery mounting. It also comes supplied with carbon battery strap and alloy posts, receiver mounting plate for the stock unit for a secure bolt in design and stainless steel hardware.

View more images of the conversion here


May 17, 2011

Exotek F104 bolt-in type servo mounts

Exotek F104 bolt-in type servo mounts

Exotek have produced these F104 bolt-in type servo mounts. Six months of track testing have proven that these mounts are the real deal for your F104 or EXO104. Quick position changes or servo removal are achieved via 4 cupped set screws that grab the servo on both sides like a vise without tweaking the chassis or damaging the servo. It works with standard servos or lay down servos, with the latter having the option of quick Ackerman changes.

View more images of the mount in place here


May 17, 2011

Exotek Blitz rear chassis brace

New from Exotek Racing are these heavy duty alloy rear chassis braces for the HPI Blitz. This brace strengthens the known weak point in the chassis and protects the rear of the chassis from cracking or snapping off. A special lightweight design allows for side to side flex for proper rear traction but eliminates front to back flex to strengthen the chassis and rear shock tower. Sold in a pair with fasteners.

Source: Exotek [exotekracing.com]


Mibosport
TargetRC
VP Racing
T-Works