Kanzen Bearings have produced a new ball bearings set for the new Awesomatix A700 EP 1/10th Touring car. Rigorously tested and certified ISO5, they are built with the strongest steel and hardest ceramic components, and claim that their bearings are almost bullet proof.
Source: Kanzen [kanzen-bearings.com]
Nosram have released information on their Fatboy 8 brushless motor and Falcon 8 brushless controller designed for 1/8 scale electric vehicles. The Fatboy 8 2200kv motor is specially designed for the needs of 1/8 scale off-road vehicles, is based on the XTEC X12 technology and sports a CNC-machined gun metal colour can, 4-pole/12-slot design, over-sized solder tabs for up to 6mm² wires, extra large ball bearings and a sensored design.
Click here to continue reading
Nosram introduce the Pure 2 modified brushless motor. Newly designed from scratch the BL motor features a CNC-machined 7075-T6 aluminium can with cooling cut-outs to keep the running temperature low, comes with a 12.5mm sintered rotor and oversized ball bearings. Nosram’s PreciSensor system allows for easy timing adjustments using inserts and the motor will be available as 4.5T, 6.5T and 8.5T variant first with 4.0T, 5.0T and up to 10.5T versions to follow.
Source: Nosram [nosram.com]
ST Racing Concepts introduce the green anodised aluminium parts series for the Traxxas 2WD Short Course truck. These parts will certainly be a hit for those wanting to hop-up their favourite energy drink theme short course truck or add some durability and great looks to their machine. Available are steering knuckles, front caster blocks, rear hub carriers, steering bellcranks, front bulkhead, shock caps, front and rear skid plate as well as lock-pin hex adapters. Most of the parts fit the Traxxas Monster Jam replicas also.
Source: STRC [teamstrc.com]
The Buku Speed Tune clutch is the world’s first and only clutch for nitro RC vehicles that lets you independently tune the spring tension for each shoe without removing the motor or clutch bell. There is no need any more for pulling out the engine, breaking down your clutch, and picking a spring for each shoe. Each clutch shoe is equipped with a special Aramid fibre pad that is extremely wear resistant and that causes virtually no wear to the clutch bell. The extremely low wear rate and uniform friction characteristics of the Komposite fibre pads with no wear to the clutch bell create a very consistent and reliably performing clutch.
Source: Buku [bukupower.com]
Dynamite’s Passport UltraForce produces up to 200W of charge power with AC/DC input voltage and an array of features that certain to catch the eye of even the most avid of RC enthusiasts. The UltraForce pumps out up to 10 amps of continuous current and up to 5 amps of discharge current. The charger sports an anodised black aluminium faceplate with brushed aluminium accents, easy-to-use push button navigation and enough power to sufficiently charge high capacity batteries with 1-3C charge rates.
Click here to view the features
LRP introduce the Vector X20 modified brushless motor. Developed completely from scratch it is designed for highest efficiency and maximum power output. The result of the new design is more power and higher rating at improved temperature characteristics and lowest friction. A novelty of the new technology is the dual axis balanced 12.5mm sintered worksteam rotor resulting in an absolutely precise running and increased efficiency. The larger sized ball bearings and LRP’s PreciSensor system also contribute to the performance of the motors. The CNC-machined 7075-T6 aluminium housing sports optimised cut-outs for best heat absorption and lowest running temperatures of the motor that are available from 4.5T to 9.5T with 4.0T, 5.0T and 10.5T variants will complete the line in the near future.
Click here to view more pictures
Xray introduce the CNC-machined FRP mud protectors for the XB808 and XB9 line of 1/8 scale off-road buggies. Designed to protect the rear arms, driveshafts and shock absorbers from rocks, dirt and mud the parts are ideal when running in wet and dirty racing condition. Developed for direct installation the protectors do not require body trimming or the drilling of additional holes.
Click here to view a picture of the mounted protectors
