Red RC » Protoform

October 19, 2019

Protoform Hyper-SS 1/8th scale GT body shell

Following a first teaser Protoform have now officially introduced their all-new Hyper-SS body shell for the popular 1/8th scale GT classes. When IFMAR announced the first-ever 1/8th GT Worlds with a new set of Global Body Spec rules, Protoform set out to design a new body that was not only fast, but also relevant to the full-scale racing era that is here and now. In the past, GT8 cars have always featured cab-forward sports-car style bodies. But in recent years, the rapid advancement of the full-scale GT cars has evolved into the Supercar, and then more recently into the Hypercar that will be featured in the premier class at the Le Mans 24h in 2020. The radical, low-slung shape of the body includes a unique rear-wing with moulded-in Gurney flap. At the rear window area, low-drag louver vents can be trimmed out to allow for efficient engine cooling if required. The Hyper-SS meets all 1/8th GT Global Body Spec rules and is already approved for IFMAR competition at the upcoming World Championship. The body fits popular 1/8th scale GT cars with the shorter GT1 wheelbase of 325mm, and comes with rear wing, nylon wing mounting hardware, decal sheet, window masks, and overspray film. It is available in two weights of high-quality polycarbonate: 1mm regular weight and 0.75mm light weight for expert racers.

View more images here

October 17, 2019

Protoform tease new GT8 body shell

Protoform have released a first teaser image of their forthcoming new body shell for the competitive 1/8th scale GT on-road classes. The Hyper-SS is supposed to be a “game changer” according to Protoform with with the teaser promising a low profile design that could assist handling for both nitro and electric-powered cars. Full details will become available soon.

Source: Protoform [racepf.com]

September 27, 2019

WellRC Racing body cut template & starter box plate

A new brand is coming out of SoCal, WellRC Racing by nitro guru Walter Diaz. The first products are body cut templates and starter box plates. Starting with the WellCut templates, they were designed to take the hassle out of mounting ProtoForm R18, R19 and P909 bodies. They are placed on top of the body and accurately trace the cut lines for engine, air filter, fuel tank, roll bar, top end needle, and rear body post holes. Made from high quality ABS plastic for long life, the templates are available for Mugen, Serpent and Xray cars.

Continue reading here

September 12, 2019

Protoform pre-cut Turismo hard wing

Coming from Protoform is the pre-cut Turismo hard wing for 190mm touring car body shells. It is an optional medium-weight wing using the same design as the stock Turismo wing. It is highly recommended when using the X-lite weight body, and provides a neutral feeling and added durability for your 190mm touring car on any track surface. Conveniently pre-cut, the Turismo hard wing also includes pre-cut 40mm x 20mm endplates, double-sided tape, and Protoform’s signature wing buttons and under-wing teardrop nuts with mounting hardware.

Source: Protoform [racepf.com]

August 9, 2019

Protoform Chevrolet Corvette C7 Pro-Mod body shell

Following a first teaser image Protoform have officially unveiled their all new Chevrolet Corvette C7 Pro-Mod body shell for drag car converted Traxxas Slash 2WD trucks. Protoform has a long heritage in RC Drag Racing. In fact, the first body the brand ever released back in 1992 was a Stealth Funny Car, so PF are getting back to their roots by introducing the company’s first-ever body dedicated to the fast-growing SC Drag Racing class: the Chevrolet Corvette C7 Pro-Mod. This body will transform the Traxxas Slash 2WD into a scale 1/4-mile beast with a ton of realistic details to give the SC drag car a super unique, race-inspired look. The C7 Pro-Mod is a convenient 1-piece body design with no assembly necessary. Protoform recommend using Pro-Line’s Hoosier 2.2” Drag Racing front tyres on the front and Hoosier Drag Slick SC 2.2”/3.0” Drag Racing tyres in the rear combined with a set of Pro-Line’s Pomona Drag Spec wheels for the ultimate scale hot-rod stance. To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to the 2WD Slash in order to fit correctly.

View more images here

August 7, 2019

Protoform Corvette drag racing body – Coming soon

Protoform have released a first teaser image of their forthcoming new Corvette drag racing body. With a drag racing body shell being Protoform’s first product back in 1992, the ultra-successful brand now goes back to their roots with the introduction of a Pro Mod Vette body. Full details and more images will become available soon.

Source: Protoform [racepf.com]

July 15, 2019

Protoform X-15 1/8th on-road body shell

New from Protoform and made for the demanding 1/8th IC Track class is the all-new X-15 body shell. The last four 1/8th IC On-Road IFMAR Worlds Championship winners have relied on Protofornm to finish on the top step of the podium. In their quest for a 5th straight, PF have developed the X-15 race body. The “X-15” name is legendary and carries with it an enduring reputation of innovation, sheer speed and record setting performance. The new body style has been exhaustively tested by Protoform’s world-class team of drivers and has proven to be a step forward in predictable handling and lower lap times. Many unique shapes and proportions have been developed during its evolution process including streamlined cockpit and never-before-seen shrouding around the engine area. These features are sure to make the body stand out at the track. The X-15 is Global Body Spec compliant and ROAR approved. Made in the USA from high-quality, super-durable polycarbonate, it is available in both Pro-Lite and Light Weight. Included with the body are universal stiffeners with hardware, a stylish decal sheet, and overspray film complete the package.

View more images here

July 15, 2019

Protoform Turismo 190mm touring car body shell

Following a couple of teasers Protoform have introduced their all-new Turismo body shell. Electric touring car racing has undergone yet another evolution since the multi-national championship-winning Type-S was released in 2017. Catering to the demands of racers needing ultra high-downforce, super low-CG aerodynamic body shells, Protoform is proud to release its latest contender for 190mm touring car racing: the Turismo. Designed and produced using the latest in 3D CAD and 5-axis milling technology, the Turismo is packed with new features for performance on track and ease-of-mounting while preparing to dominate the competition. The aerodynamic features include a radical high-downforce design with lowered nose and trunk sections, a cab-forward layout with extended A-pillar ribs for precise turn-in steering, and an extended decklid length with spoiler lip for massive rear grip. The rear wing posts moved outwards for increased stiffness and anti-tuck protection while the rear decklid stiffening ribs tie directly into the wing posts to reduce rear body flex. Sculpted side door panels make for increased stiffness and side bite.

Continue reading here