Red RC » Revolution Design

December 19, 2014

RDRP B5 series VTS Slipper Option Kit

Revolution Design Racing Products introduce the VTS Slipper Option Kit for the B5 and B5M, designed to make the most out of the original Team Associated clutch. The 4-piece kit replaces the standard outer and inner aluminium slipper plates with vented variants for improved heat dissipation and fading-free operation. Also the centre VTS plate is replaced with a vented and hard-coated aluminium plate while the VTS slipper housing, originally a moulded composite part, is supplied in a lightweight, blue anodised and laser-etched aluminium variant. Like the slipper plate the housing is of a vented design to not only allow for better heat dissipation but to also lower its weight. All parts are precision machined from 7075-T6 aluminium and they are a direct fit on both the B5 and B5M.

Click here to view a photo of the parts installed

December 15, 2014

RDRP Ultra ball diff & thrust race greases

Revolution Design Racing Products introduce their new line of dedicated greases for the use with ball differentials and thrust races. The Ultra Ball Diff Grease was previously sold under the Vampire Racing brand and now makes a revival in Revolution Design’s chem series. Although gear differentials are a more common sight in today’s vehicles ball differentials are still a welcome tuning option when running in low to medium grip conditions. The grease is designed to perform in off-road buggies, touring cars and pan/formula cars. The white-colour ball diff grease comes in cups of 5g. Also new is the black thrust race grease. Containing finely ground graphite for improved load stability the lubricant is ideally used on the thrust races of ball differentials. Like the diff grease the thrust race lube comes in a handy cup containing 5g of grease.

Source: RDRP [revolution-rc.com]

December 10, 2014

RDRP Durango aluminium 1/10 big bore shock options

Revolution Design Racing Products introduce the Team Durango aluminium big bore shock cap and preload nut R2 set. The revised parts are of an updated design to allow for a more convenient ride height adjustment and to create improved looks. The aluminium preload nuts are now modelled after RDRP’s popular Kyosho RB6 parts to make for ever better grip when adjusting the spring preload while the updated lower shock caps cover the machined recession that is not used when leaving the shock boots off. This makes for an overall sleeker look and easier cleaning. All parts are made from high quality 7075-T6 aluminium, the preload nuts are gold anodised while the shock caps are black of colour. Included with the set also come suitable rubber O-rings for the preload nuts.

Click here to view another photo

November 26, 2014

RDRP Team Durango precision spur gears R2

New from Revolution Design Racing Products come updated spur gears for the use with Team Durango’s 1/10th scale off-road vehicles. The redesigned and wider Revolution2 gears offer improved durability compared to the previous spurs. The increased contact patch with the pinion is especially helpful when using low-turn modified motors while offering exceptional efficiency for stock spec classes. All gears feature machined venting and weight reducing holes to minimise heat build-up when running a soft slipper setting and they come with engraved size markings for easy identification. The gears are available as Stock racing 72T and Modified racing 87T variant.

Source: RDRP [revolution-rc.com]

November 12, 2014

Revolution Design Racing Products Ultra Bearings

New from RDRP is a line of high-quality ball bearings as a replacement for worn-out ball races or as instant upgrade when building a new kit. Their special construction with a protective rubber seal on the “outer” side and a low-friction steel shield on the “inner” side maximise the protection against the elements while optimising the drivetrain’s efficiency compared to all-rubber shielded ball races. This makes them especially useful in demanding applications such as electric and nitro off-road racing. A low-drag lubricant further adds to the ultra smooth operation with the bearings being available as complete car sets for many Team Associated, Team C, Team Durango, Kyosho, Mugen, Schumacher, TLR, and Yokomo kits as well as individually in 4-piece sets.

Source: RDRP [revolution-rc.com]

October 20, 2014

Carsten Keller joins Revolution Design Racing Products

German 1/8th scale off-road front runner, Carsten Keller has teamed up with Revolution Design Racing Products. The 2013 German 1/8th E-Buggy champion and 2014 EFRA Euros top 5 finisher will use the full line of RDRP tools, wrenches and accessories to work on his Kyosho rides during his 2015 campaign.

Source: RDRP [revolution-rc.com]

October 10, 2014

Ultra Flat Head Carburettor Wrench

The new Revolution Design Racing Products Ultra Flat Head Carburettor Wrench is a dedicated flat head screwdriver to adjust and monitor the carb needle settings on nitro and gasoline engines. Offering a hardened spring steel 4×0.8mm tool tip the wrench is ideal to adjust the carburettor’s mixture needles while a gauge incorporated in the tool blade helps to monitor the adjustments made. Simply hold the gauge in place with the fingertips and rotate the screw driver into the desired direction to richen or lean out the carb setting – the red anodised indicator will clearly display the changes made. Part of the tool handle is also a rubber plug that helps to securely stop the engine by pressing the wrench against the flywheel. As usual the tool is constructed from high quality 7075-T6 aluminium while the blade is made from high quality spring steel. Laser-etched logos round out that signature Revolution Design look.

Click here to view more photos

September 30, 2014

RDRP Ultra Turnbuckle Wrenches

New from Revolution Design Racing Products come the Ultra Turnbuckle Wrenches for the toe and camber links of many 1/12th to 1/8th scale cars, buggies and trucks. They are constructed from RDRP’s renown black anodised aluminium and high-quality spring steel and they allow for swift and effortless suspension geometry adjustment thanks to their clever design. The compact yet sturdy tool tip makes turnbuckle adjustment even in tight surrounding a breeze while the specially shaped handle gives perfect tool control. Laser-etched markings and colour coded aluminium rings not only look cool but they also help with easy identification of the wrenches that are available as 3mm, 4mm and 5mm variant.

Click here to view more photos