Red RC » Schelle Racing Innovations

June 14, 2016

Schelle TLR 22 3.0 rear camber block & Ti motor screws

Schelle Racing Innovations have introduced two new products in the form of a TLR 22 3.0 rear camber block and 7mm titanium motor screws. Starting with the TLR part, the rear camber block was designed to offer improved durability and make for easier adjustments. The 2-piece design does away with the plastic inserts and over-sized design of the kit parts, replacing them with a sleek base and durable upper 2-piece construction that is adjustable with ballstud shims between the base and upper block. The two clamping screws which secure the mount are easily accessible from above, not obstructed by the shock tower. The block is available in black and hard anodise colour.

Continue reading here

June 7, 2016

Schelle Racing Innovations 10 for 10 Onyx bearings

Schelle’s popular Onyx high-quality ball bearings are now available as a 10 for $10 deal. The greased ABEC3 standard bearings sport combined rubber and metal seals, making them ideal for kits and RTR vehicles as well as both 1/8th and 1/10th scale cars as they have a lower starting torque, making them run with less drag compared to other rubber-sealed bearings. The 10-piece ball race packs are available in a range of popular metric and imperial sizes.

Source: Schelle Racing Innovations [schelleracing.com]

May 20, 2016

Schelle B5M 0.5mm offset steering bushings

Schelle Racing Innovations have introduced the 0.5mm offset steering bushing set for the Team Associated B5M buggy. The 0.5mm-Up setting was requested by many team drivers as their go-to, so Schelle made this special set of bushings to get the hot setup without using any shims or washers. The set is usable with the T5M and SC5M as well, with the 0.5-Down position being advised for trucks.

Source: Schelle Racing Innovations [schelleracing.com]

May 13, 2016

Schelle Racing Innovations B6 titanium upper screw set

Coming soon from Schelle Racing Innovations is an upper titanium screw set for the Team Associated B6 buggy. Made using Grade 5 6Al-4V material the screws offer a 40 percent weight advantage over conventional steel screws while being highly corrosion resistant at the same time. The set strategically removes the kit’s steel screws from up high above the chassis, which lowers the centre of gravity and improves handling while all chassis bottom screws are not included in this set.

Source: Schelle Racing Innovations [schelleracing.com]

May 2, 2016

Schelle XB2 chassis protector decal

Coming from Schelle Racing Innovations is a chassis protector decal for the Xray XB2 buggy. Printed by UpGrade RC the pre-cut chassis skin sports numerous Schelle logos and it is made to protect the chassis bottom from becoming excessively scratched or damaged when racing on abrasive surfaces while also keeping the lower chassis screw heads from becoming clogged with dust and dirt.

Source: Schelle Racing Innovations [schelleracing.com]

April 21, 2016

Schelle B5M & TLR 22 3.0 vented motor plates

Coming from Schelle Racing Innovations are lightweight vented motor plates for the Team Associated B5M and the TLR 22 3.0. Cut from high-quality aluminium and coming in an anodised finish the motor plates offer minimised weight, increased airflow, and maximised rigidity. The unique vent slits are machined partial depth on the back side of the motor plate to create two tiny slits in the plate. These slits will keep air flowing through, and everything else outside and the plates are fully machined to keep them from warping under extreme stress and heat and they weight in at only 12.95g for the B5M and 13.8g for the TLR plate. They are available as B5M 3 or 4-gear variant in black or blue colour and as black or hard anodised finish version for the 3-gear TLR 22 3.0.

View more images here

April 13, 2016

Schelle B5M Pro Built ball differential

Coming soon from Schelle Racing Innovations is the Pro Built ball differential for the Team Associated B5 series vehicles. Pro built by Nick Wautlet, the diff uses Schelle 3/32″ tungsten carbide differential balls along with a caged ceramic thrust bearing for buttery smooth diff action. It also uses genuine Team Associated outdrives, diff gear, rings, and the T-nut assembly and it is broken-in using a drill to seat parts and pre-groove the diff rings. The diff comes ready-to-run but needs to be set as it is stored loose to prevent damaging the rings.

Source: Schelle Racing Innovations [schelleracing.com]

January 12, 2016

Schelle Asterisk aluminium wing buttons

Coming soon from Schelle Racing Innovations are the Asterisk aluminium wing buttons. Machined from billet aluminium, anodised, and laser etched, these wing buttons have a unique look and design as the raised edges help reduce drag while the distinct laser etching and hex outer profile will make for visual impact. The buttons fit flat head or button head metric M3 screws on many 1/10th and 1/8th scale cars and they are available in blue or black colour.

View the blue wing buttons here