Red RC » Xray

November 15, 2007

Barry Baker wins ’07 ROAR Nitro Nationals

Barry Baker wins 2007 ROAR Nitro Nationals

Xray are reporting on last weekends 2007 ROAR Nitro Nationals that was held at the Gulf Coast Raceway in Porter, Texas. Qualifying saw the pole position go to Xray racer Paul LeMieux, the only driver to get a 20 lap run, with Kyosho racers Chris Tosolini in 2nd and Scott Kimbrow in 3rd. With the top 7 drivers qualifying directly for the final, the other racers had to go through the semi to take their place in the main final. At the start of the final, it was Paul that got the best start but a mistake dropped him back and allowed Kimbrow into the lead. After some time, Ralph Burch, Barry Baker and LeMieux could make it passed Kimbrow and at the 15 minute mark they all had a lap on 4th place and at 25 minutes they came in for their tire stop which saw Ralph stall, and lose 7 or 8 laps, LeMieux also have problems. Baker was now leading, and a stop for only 1 tire meant he lost little time and could go after the leaders and with 7 minutes left to race, he caught and passed the leader and took the win, leaving Josh Cyrul in 2nd and Scott Kimbrow in 3rd.

Source: Xray [teamxray.com]

November 12, 2007

KM Racing NT1 titanium 2-speed shaft

Continuing on with the release of hop up parts for the Xray NT1, comes yet another part from KM Racing. This 2-speed gearbox shaft is a direct replacement for the stock version and has been made from a solid piece of lightweight, yet very strong, titanium which helps the overall weight of the car as well as helping reduce rotating mass.

Source: KM Racing [km-rc.com]

November 10, 2007

Xray Column – New Electric Touring Car

Xray Column - New Electric Touring Car

The 13th installment in the Xray column from Xray owner and chief designer Juraj Hudy is now online. In this months column, Juraj talks about the process and thoughts behind the development of the company’s new touring car, the T2’008.

Before we started with the testing and development, we first built very demanding and difficult tracks at our in-house indoor track. Of course we did the same for outdoor testing but not as much as indoors, as the weather this year was changing very rapidly and as such the outdoor track conditions were changing too fast… a good recipe for bad testing. At our indoor track we have a special environmental control system that keeps conditions very stable, and as such we could run from morning ‘til night under the same track conditions, thus assuring objective results.

Read the full column here.

Source: Xray [teamxray.com]

November 8, 2007

Northwest Indoor Champ Series Rd1

North West Indoor Championship Series Race 1

Xray have a report on their site from the first round of the Northwest Indoor Championship Series that was held at the Seattle Indoor Raceway, which saw just under 100 racers in attendance. With a groove formed after practice and the Friday night club race, Saturday’s qualifying was very quick and saw Darren Shank place first in both TC Mod Foam and 1/12th 19T, while the TQ in the other classes went to Frank Mirabelli in TC stock foam, Marcos Garcia in rubber stock class, Randy Sides the 19T Foam class and Brian Bodine the 19T TC Rubber class. The races ended the very same with all the TC top qualifiers taking their pace into the final and winning it, giving Xray top honours across the board, while in 1/12th 19T, it was Sean Maybell that took the win.

Source: Xray [teamxray.com]

November 6, 2007

Sala Federico wins Italian Indoor Champs

The 2007 Italian electric touring car indoor championships were held in Firenze on the last weekend of October and all the top Italian EP racers were out to battle for the title. In qualifying it was Corally racer Sala Federico that claimed the pole position in front of 2nd placed Michele Romagnoli, racing for Xray, in 2nd. After 2 of the 3 finals, it was a win a piece for Federico and Romagnoli with another Xray driver Guido Barbera in 3rd on both occasions. In the 3rd and decisive final there was many lead changes and with 25 seconds to go, the order was Barbera, Romagnoli and Federico but a misplaced marshall caused a crash for Barbera while a closely following Romagnoli had little place to go and also crashed leaving Federico through to take the win and with it the overall title, Romagnoli was 2nd and Barbera ended his day in 3rd.

Source: Xray [teamxray.com]

November 5, 2007

Xray T2 Aluminium Rear upright

Xray have released an updated version of their T2 aluminum rear uprights which now feature two new roll center positions, giving the user a total of 4 different roll center positions. The super-fine tuning roll center positions allow for very small set-up adjustments to tailor your car to different track conditions, as well as different on tire choice (rubber or foam). Roll center positions may be additionally adjusted by using shims of different thickness to alter the height of the roll center link.

Source: Xray [teamxray.com]

November 4, 2007

New Xray 1/8th Buggy?

New Xray 1/8th Buggy

Our partners Neo Buggy have gotten pictures of what looks like the new Xray 1/8th scale buggy from this weekends Nitro Cross race in the US. The most noticeable changes are the front and rear shock setup which is comparable to that on the Team Associated RC8. There have been rumours afloat that XRAY are working on a follow up to their XB8 which was launched in 2004.

Click here for more pictures.

Source: Neo Buggy [neo-buggy.net]

October 31, 2007

Atomic RC Xray NT1 optionals

Atomic RC have released yet more optional parts for their favourite 1/10th 200mm, the Xray NT1. Adding to their already extensive line-up, the new parts include a reinforced rear stabilizer mount, aluminium 7075 hex wheel adapters and middle mounts for the radio tray. Also newly available is a lightweight 2nd gear adapter, an aluminium center shaft mounting bracket, a flex-control engine mount set, lightweight delrin adjustable nut for use on the 8.4mm pivot balls and finally a graphite brake linkage set.

Click here to see the products… content