Red RC » Yokomo

September 19, 2014

Avid carbon fibre touring car option parts

Avid have a range of optional carbon fibre parts for the Xray T4, Team Associated TC6.2 and the Yokomo BD7 available. The line-up includes 2.0mm carbon chassis, 2.0mm and 1.5mm top decks, as well as 2.0mm shock towers with all parts being direct replacements for the kit items. The chassis allow to lower the centre of gravity and the roll centres more than stock and they are specially cut to ensure equal twisting resistance side to side. Also the chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering. Different thickness top decks help to fine-tune the chassis stiffness to adapt the cars for both carpet and asphalt racing. The shock tower are available separately for the front and rear and as combo sets including both the front and rear shock stay.

Click here to view the other new parts

September 18, 2014

Yokomo BD7 2015 – Announcement

Yokomo BD7 2015 - Announcement

In the build-up of the forthcoming IFMAR 1/10th Electric On-road World Championships Yokomo announce the soon release of the BD7 2015 touring car kit. Building on the World-wide success of the BD7 2014 the Yukijiro Umino designed car will include the team’s latest ideas in touring car design. The 2015 specification kit will be revealed on September 29th with the World’s team aiming to snatch the prestigious World Championship title with the production car from October 6th on.

Source: Yokomo [teamyokomo.com]

September 17, 2014

Arrowmax B-Max2 aluminium battery stopper

Arromax now have this aluminium battery stopper for the Yokomo B-Max2 buggy available. Made from 7075-T6 aluminium and coming blue anodised the part replaces the original plastic stopper when using shorty LiPo battery packs. The unique honeycomb design matched with Arrowmax’ tool and option parts range and reduces the weight to a minimum at the same time.

Source: Arrowmax [arrowmax-rc.com]

September 10, 2014

Arrowmax B-Max2 rear brass bulkhead set

Made for Yokomo’s B-Max2 2WD buggy is this rear brass bulkhead set from Arrowmax. The multi-piece part replaces the stock bulkhead with a heavier and more rigid solution for an improved weight balance and a rock solid rear end. The bulkhead weighs in at 36g, it incorporates a rear swaybar mounting system for high-bite surfaces and it is available now.

Source: Arrowmax [arrowmax-rc.com]

September 6, 2014

Arrowmax B-Max2 aluminium servo mounts

New from Arrowmax for the B-Max2 are these blue anodized 7075-T6 aluminium servo mounts. A direct replacement for the kit standard plastic parts, it holds the servo better in place and is much stronger than the original part.

Source: Arrowmax [arrowmax-rc.com]

August 27, 2014

Roche BD7-2014 red seal ceramic bearing set

Roche RC have released a new bearing set for the Yokomo BD7-2014. The set contains high quality red seal ceramic bearings for reduced drivetrain drag and higher efficiency and includes four 10x15x4mm, eight 5x10x4mm and three 5x8x2.5mm ball races.

Source: Roche [roche.hk]

August 25, 2014

Radtec BD7 ultra lightweight shock spring retainers

Radtec have a new aluminium option part for the Yokomo BD7 touring car available in the form of ultra lightweight shock spring retainers. At a weight of 0.5g per piece the parts are 30 percent lighter than the stock retainers, they are made from 7075-T6 aluminium and come with blue or black anodising to make them suitable for both the standard and black edition chassis.

Source: Radtec [radtec-rc.com]

August 22, 2014

Pro-Line B-Max4 Phantom body & B5 front towers

Also new from Pro-Line is this Phantom body for the Yokomo B-Max4 III designed by team driver driver Lee Martin. It features a stealthy cab forward look and sweeping body lines that flow back to a single point while an optional centre fin adds additional high speed stability and finishes off the design. Also new for the Associated B5 are carbon fibre front shock tower with aluminium ball stud mounts! The carbon fibre shock tower adds stiffness for improved shock action as well as durability to an area that takes a lot of abuse while the gun metal anodized aluminium ball stud mounts give added style and precision. Available in a wide version for the B5 and a narrow version for the B5M

View the B5 front shock tower here