Red RC » Cars

May 16, 2019

Axial 1/24 SCX24 Deadbolt 4WD RTR rock crawler

Axial have introduced their new 1/24 scale SCX24 Deadbolt 4WD RTR Rock Crawler. Hardly 200mm long the smaller sibling of the SCX10 II Deadbolt truck is ideal for both indoor and outdoor excursions thanks to plenty of steel components — from the C-channel frame rails to the front and rear axles and dogbones. Even over off-road, mountainous, rocky and desert terrain, it has the strength to keep pushing onward and upward. For the most reliable handling, the SCX24 chassis features a three-link front and four-link rear suspension. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. The worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces torque twist. Powered by an included 180-size motor and LiPo battery, the vehicle shows off competence and charisma on the trails. The Deadbolt body offers a narrow stance, bulging hood, realistic driver figure, and moulded roll cage with realistic light bar. The realism continues right down to the ground with licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100 percent complete and ready to run. Everything required for action is in the box: the assembled and finished vehicle, an Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit, the Dynamite 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery, as well as an USB LiPo charger; and even four AA cells for the transmitter.

View a list of the features and more images here

May 14, 2019

Kyosho Inferno MP10 truggy – Prototype images

Kyosho’s own Yuichi Kanai has released first teaser images of what appears to be an Inferno MP10 nitro truggy. Currently in prototype stages using a longer main chassis plate and rapid prototype arms, the vehicle will carry over most of the new designs incorporated in the MP10 buggy with the chassis weight distribution being set for now while the blurred-out arms and shock towers indicate that Yuichi is carrying out suspension geometry tests at the moment.

View more images here

May 10, 2019

Xray XT8 1/8th nitro truggy kit

Xray have introduced their new XT8 1/8th nitro truggy kit. The kit builds on the proven XT8 platform but features refinements in the suspension and chassis area. First up is the new front suspension geometry with updated C-hubs and steering blocks. The latter are of an new design with interchangeable Ackermann plates and moulded-in threaded bushings for the kingpin screws. New to the “2019” model are also updated C-hubs to accommodate the updated steering blocks as well as CV-design driveshafts front and rear to replace the previous universal-type shafts. The chassis was updated to work with the included “soft” radio tray which is the best solution for low to medium bite track while an optional hard radio tray is available when running on high bite surfaces or in high ambient temperatures. For the rear of the truck, Xray have included a new lightweight 1-piece wing mount that is about 40 percent lighter for a lower centre of gravity and optimised overall weight balance. A new wing mount brace helps to prevent gearbox breakage as it connects the wing mount and chassis braces that help to transfer impact energy towards the chassis. Also part of the kit is an updated 7075 alloy shock rear shock tower to accommodate the new rear wing mount, updated rear uprights with larger outer bearings make for improved reliability and upgraded shock absorbers with soft compound bottom-ribbed volume compensator membranes help with suspension efficiency. The kit is rounded out by new aluminium clutch shoes as well as 2.6mm front and 2.8mm rear swaybars.

View a list of the new features here

May 8, 2019

Tamiya Lunch Box Mini – Coming soon

On show during this week’s Shizuoka Hobby Show is Tamiya’s forthcoming Lunch Box Mini truck on the all-new SW-01 chassis. Resembling the iconic 1/10th scale Lunch Box 2WD monster truck, the 1/24th scale Mini variant comes on a newly developed stunt-type chassis that is usable both indoors and outdoors. To make for a more agile handling the truck will lean in corners which should also add to the overall appearance when running the palm-sized truck. No mention of a release date yet.

View more images here

May 7, 2019

Team Associated B6.1DL 2WD buggy kit

Team Associated have introduced their limited edition B6.1DL 2WD buggy kit developed for racing on very high bite tracks where a forward mass is beneficial and chassis roll needs to be tamed through a low centre of gravity. The B6.1DL has a Laydown Stealth transmission that gives the car additional traction when exiting the corners. The addition of +1 Ackermann plates and gull wing suspension arms tune the steering for a razor-sharp feel and more control. The B6.1DL features the B6.1’s easy-access differential, diff height adjustability, and an all-new slipper along with a lightweight JConcepts body shell and wing.

View a list of the features and more images here

May 3, 2019

FTX Outback Fury Xtreme 1/10 4×4 Pro Spec trail roller

CML Distribution have announced the soon release of the FTX Outback Fury Xtreme 1/10 4×4 Pro Spec trail roller. Based on the FTX Fury, the Outback Fury Xtreme is bringing together new features and the current crop of aftermarket Fury option parts for a hardcore rig ready to add the owner’s choice of electronics. Factory assembled and finished with a pre-painted scale styled pick-up body the Xtreme comes complete with moulded tubular roll cage and integrated roof top LED light bar. With metal axle and pinion gears, drive housings, centre telescopic sliding driveshafts and a complete metal 3-gear transmission the Xtreme is ready for the toughest courses. The super stiff carbon fibre chassis rails provide the ultimate platform for the 6mm steel multi-link suspension to navigate terrain, while aluminium oil-filled shock absorbers smooth out the bumps. Other features include aftermarket CNC machined aluminium accessories, painted metal axle covers, chrome hub covers and super soft aggressive tread high traction tyres. The ARTR kit will hit stores by mid-June.

View a list of the features and more images here

May 2, 2019

Xray XT4 – Coming soon

Xray have announced the soon release of their all-new XT4 off-road platform. Expected to be a XB4-based 1/10th 4WD truggy kit, the XT4 will add to the growing class of buggy-based 4WD truck kit and conversions that are becoming increasingly popular especially in the USA. More information is expected to surface shortly.

Source: Xray [teamxray.com]

April 30, 2019

Tamiya Lunch Box Mini – Coming soon

Tamiya have released a first image of their forthcoming Lunch Box Mini monster truck. Designed with entry-level modellers in mind, the body comes pre-cut and pre-painted with the truck using 1/10th scale tyres for a monstrous appearance. Full details will become available during the forthcoming Shizuoka Hobby Show in Japan.

Source: Tamiya [tamiya.com]