Red RC » Products

August 23, 2016

JConcepts B6-series Aero short chord rear wing

JConcepts have introduced the new B6-series Aero short chord rear wing. The new Aero wing has intriguing details, a leading edge that drops below the mounting point that acts in a scooping manner. What separates the new wing from the standard is the shorter deck length, otherwise known as the “chord length”. The shorter chord has less rear overhang allowing for quicker rotation in the 180 degree turns and will have less impact in gusty wind conditions or long aerial manoeuvres. The centre channel is just narrow enough for the B6 wing mount assembly but drops the wing at just the correct height and position. The side-dams feature large openings for tyre clearance and expansion. A forward gurney option gives drivers an adjustment that previously hasn’t been available in the class and clipped rear corners help minimise flex breakage which is so common on 1/10th off-road racing machines. The joint wing assembly includes two wing pieces suitable for both the B6 and B6D buggy.

Source: JConcepts [jconcepts.net]

August 23, 2016

Team Magic B8ER HRC Version 1/8th E-Buggy

HRC Distribution have introduced the Team Magic B8ER HRC Version 1/8th electric buggy. Based off of the standard kit the HRC Version features a new waterproof 16kg-cm high-torque steering servo, an upgraded 2500kv brushless motor as well as HRC Racing BullDog tyres. The buggy will become available in a yellow/black and red/black bodyshell variant from September on.

View the body colour variant here

August 23, 2016

Scorpion Vanguard S3-80 Turbo Stock speed controller

Scorpion have introduced their new Vanguard S3-80 Turbo Stock brushless speed controller. Building on the S3-140 Modify and S3-80 Super Stock ESCs the new Turbo Stock was especially developed for demanding Stock class racing with 8.5T to 25.5T motors and it offers a wide range of timing and turbo adjustments to make it usable for competitive boosted class racing. The controller is built using military-spec components, it utilises an aluminium heatsink case and features a 6V/3A BEC system, multiple protection features and it is usable with both sensored and sensorless motors. The V-Link cable for easy setup using a PC and a high-speed cooling fan are available optionally.

View the specifications here

August 23, 2016

Trinity introduce Motolyser DC 1S booster

Trinity have introduced the Motolyser DC 1S booster for all 1S LiPo battery classes. Super small and of a low weight the voltage booster allows to run 1S LiPo-powered 1/12th and 1/10th scale cars without the need for an additional, and heavy, receiver battery pack. The booster features an on/off switch that is mounted right on the PCB for improved durability and reliability and it was used by TQ Marc Rheinard and new IFMAR World Champion, Naoto Matsukura, among others, during this week’s Electric On-road World Championships.

View the booster strapped into Naoto’s car here

August 23, 2016

Shepherd Velox F1 aluminium caster inserts

Coming from Shepherd and made for the Velox F1 kit are aluminium caster inserts. Available as flippable 3 degree/12 degree or 6 degree/9 degree variant the inserts are made from high-quality 7075-T6 aluminium to replace the standard composite parts for cooler looking and even more precise items. The sets include three pieces of each type and they are available in blue or black colour from now on.

View more images here

August 22, 2016

JConcepts RB6/6.6 Aero front wings

JConcepts have introduced the Aero front wings for the Kyosho RB6 and RB6.6. Front wings are not a new concept, however, they are new to the latest generation of mid-motor vehicles and demanding high-speed and grippy circuits. The latest vehicle to receive JCs “Aero” treatment is Kyosho’s RB6 line of vehicles with the wings being available in a wide and narrow variant, allowing for different aerodynamic setups while the fine-tuning can executed by adjusting the trim-able rear gurney section. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit to the popular Kyosho series of vehicles. The wings come in two piece packages including either a pair of wide or narrow wings.

View the narrow front wing set here

August 22, 2016

Ruddog 30mm & 40mm fan units with all-black wire

New from Ruddog come a total of three motor and speed controller fan units. The 30mm high airflow fan comes with a pre-wired 240mm all-black receiver cable while the larger 40mm units come either pre-wired with a 240mm all-black cable or as DIY variant with solder tabs and a separate 180mm wire. The latter allows to reduce the wire length by your own or to change the wire in case it got damaged over time. All fans utilise universal connectors and they are available now.

View the other fans here

August 22, 2016

SkyRC Toro X8 V2 1/8th scale brushless motor

SkyRC have introduced their new Toro X8 V2 electric brushless motor for 1/8th scale applications. The sensorless motor is housed in a CNC-machined T6 billet aluminium heatsink can and it is of a 6-pole, 18-slot stator design for a high-torque, high-power output. Utilising super high conductance silicon wires, a sintered neodymium magnet rotor and high purity copper windings the motor also offers high efficiency for low operation temperatures. The X8 V2 is available in a 2100kv and a 2400kv variant soon.

Source: SkyRC [skyrc.com]