Red RC » Products

August 22, 2016

JConcepts RB6/6.6 Aero front wings

JConcepts have introduced the Aero front wings for the Kyosho RB6 and RB6.6. Front wings are not a new concept, however, they are new to the latest generation of mid-motor vehicles and demanding high-speed and grippy circuits. The latest vehicle to receive JCs “Aero” treatment is Kyosho’s RB6 line of vehicles with the wings being available in a wide and narrow variant, allowing for different aerodynamic setups while the fine-tuning can executed by adjusting the trim-able rear gurney section. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit to the popular Kyosho series of vehicles. The wings come in two piece packages including either a pair of wide or narrow wings.

View the narrow front wing set here

August 22, 2016

Ruddog 30mm & 40mm fan units with all-black wire

New from Ruddog come a total of three motor and speed controller fan units. The 30mm high airflow fan comes with a pre-wired 240mm all-black receiver cable while the larger 40mm units come either pre-wired with a 240mm all-black cable or as DIY variant with solder tabs and a separate 180mm wire. The latter allows to reduce the wire length by your own or to change the wire in case it got damaged over time. All fans utilise universal connectors and they are available now.

View the other fans here

August 22, 2016

SkyRC Toro X8 V2 1/8th scale brushless motor

SkyRC have introduced their new Toro X8 V2 electric brushless motor for 1/8th scale applications. The sensorless motor is housed in a CNC-machined T6 billet aluminium heatsink can and it is of a 6-pole, 18-slot stator design for a high-torque, high-power output. Utilising super high conductance silicon wires, a sintered neodymium magnet rotor and high purity copper windings the motor also offers high efficiency for low operation temperatures. The X8 V2 is available in a 2100kv and a 2400kv variant soon.

Source: SkyRC [skyrc.com]

August 22, 2016

Active Hobby Products chassis balancers & brass weights

Japanese company Active Hobby Products have introduced their chassis balance tool and also an arrangement of brass chassis balance weights. Starting with the balance tool, it adapts a common design that helps to achieve a perfect left-to-right chassis balance without the use of scales. The tools offer a sturdy base and hardened steel pins that interlock with the balance holes most of today’s electric and nitro on-road chassis have to offer. Placing the car on the pins and using additional weights to balance the left and right weight help to achieve a 50/50 weight bias in order to gain equal left and right hand turning characteristics. The balance tools come in sets of two and they hit stores soon.

Continue reading here

August 22, 2016

Shepherd Velox V10 Low-Flex set

Shepherd have introduced the new Low-Flex set for the Velox V10 1/10th 200mm nitro on-road car. Already part of the WC Edition update kit the parts were designed to reduce the flex of the chassis’ rear end and they are now also available as the separate Low-Flex set. The backbone of the kit is the 3mm carbon brace that stiffens up the rear end of the car significantly, making the car easier and more precise to drive. The set includes the rear end carbon stiffener, modified rear bulkheads with ball bearing inserts, as well as several hardware parts and it is available in traditional blue anodising or in black colour to fit the Black Edition kits. Owner of older kits additionally need the updated rear bulkheads #402221 to make use of this latest accessory.

Source: Shepherd [team-shepherd.com]

August 22, 2016

Serpent Cobra E-Truggy 1/8th RTR kit

Coming from Serpent is the 1/8th scale Cobra E-Truggy RTR kit. Based off of the high-end Cobra E-Truggy the RTR variant offers slightly lower specifications without sacrificing performance and durability, making the truck an ideal everyday basher while also allowing a first step into competitive racing. Coming factory assembled the truck features a 4WD drivetrain with three fluid-filled gear differentials, big bore shock absorbers with protective rubber boots, machined aluminium shock towers, springsteel transmission components and turnbuckles as well as front and rear CV-style driveshafts. Also part of the package are front and rear anti-roll bars, battery compartments with velcro straps for easy and secure battery mounting and the kit also comes with a 150A 6S LiPo-compatible speed controller, 2000kb brushless motor as well as 20kg-cm metal gear steering servo and a 2.4GHz digital radio system. The kit is rounded out by a pre-painted bodyshell in orange, red, green or blue colour and it is even available with a clear body.

View more images here

August 22, 2016

Serpent release first SDX 1/10th 4WD buggy image

Serpent have released a first “official” image of their forthcoming 1/10th 4WD electric off-road buggy. In use by Jörn Neumann and other drivers during last weekend’s German Nationals, the shaft-driven and SDX-named buggy is still in prototype stages, making use of both already available Serpent parts such as lower A-arms, shocks while the remainder of the buggy is a mixture of prototype and externally sourced bits. So far the vehicle makes use of a common design with aluminium front and rear bulkheads, and a simple, lightweight mid section. We bring you more information on the project as they become available.

Source: Serpent [serpent.com]

August 22, 2016

T-Works B6-series chassis balance weights

Made for Team Associated’s sixth generation 1/10th 2WD buggies come two aluminium chassis weights. Machined from high-quality alloy and sporting a back anodised surface and laser-etched markings the under servo weight weighs in at 9.5g while the under electronics weighs adds 15g to the all-up weight of the buggy. Both use existing hardware holes and are thus securely fastened even when the going gets tough. The weights are usable separately or in combination and they fit both the B6’s and B6D’s chassis pockets.

View more images here