Red RC » Products

August 22, 2016

Zeppin introduce new electronic Spring Gauge

Coming from Zeppin is a spring gauge that helps to measure and match shock absorber springs. Offering compact dimensions of 54x72x143mm the device allows for a maximum spring rate of 29.7 N/cm and it is able to display the results in the four different units of N/cm, N/mm, LB/in and gF/mm. Other features include unit memory save, auto power off, short circuit, over weight and over voltage protection. The gauge is externally powered by a 4.8V to 15V DC power source and the set includes the main body, spring press set, press stand, cable and 5mm spacer with a 2mm spacer being available optionally.

Source: Zeppin [zeppinracing.com]

August 22, 2016

Modify T4 5g chassis balance weights

Modify have introduced specially designed 5g chassis balance weights for Xray’s T4 series of touring cars. Made to use the chassis’ pre-drilled holes underneath the steering assembly, but also fitting other brand’s cars, the dumpbell-shaped weights are a snug fit and they come with suitable mounting hardware.

View more images here

August 21, 2016

Framega YRX-12 2mm alloy chassis & lower pod plate

Italian company Framega have introduced a 2mm aluminium chassis and lower pod plate for the Yokomo YRX-12 1/12th scale pan car. Machined from high-quality 7075-T6 material the chassis sports strategically machined cut-outs to save both weight and offer optimised flex characteristics. A lot of attention was also put into reducing chassis scrubbing during hard cornering and so the side link attachment points received additional machining to achieve some extra clearance. Both the chassis and lower pod plate come black anodised, with silver chamfered edges for looks and they are available now.

View a detail image here

August 20, 2016

Pro-Spec introduce new brushless speed controller

Japanese company Pro-Spec have introduced their new brushless speed controller, developed in cooperation with ORCA. Currently still in prototype stages, also sporting the original ORCA case, the internals are redesigned to offer a smoother power band without sacrificing punch when needed. Also the brake software was renewed, again to smooth out the reactions on brake input but like the throttle characteristics the brake output can be sharpened when conditions call for it. The final ESC may come with an updated case design and we bring you more information on the project once they become available.

Source: Pro-Spec [pro-spec.jp]

August 20, 2016

T-Works UFO 64 titanium socket head screws

T-Works have introduced their new series of UFO 6AL/4V grade 5 titanium screws. CNC machined the M3 fasteners sport a distinctive “flying saucer”-shaped 2mm hex head, making them not only look different compared to other screws but they also provide exceptional mounting surface. The screws will be available in 14 different length from 4mm up to 24mm wit a special 35mm long variant also being available.

View a detail image of the screw head here

August 19, 2016

JConcepts XB2 Aero front wings

Coming from JConcepts and made for the Xray XB2 buggies are the Aero front wings. Already available for a range of 2WD buggy the tailor-made wings help to fine-tune the buggy’s aerodynamic behaviour. The Aero front wing mounts in “clean air” and is quite easy to trim, use and test without sacrificing all important track time. Available in two widths, the driver can choose either the “narrow” for a lighter feel or “wide” for heavier down force. Each set includes two narrow or two wide wings.

View the narrow front wing here

August 19, 2016

Team Magic Pro-J touring car setup tools

HRC Distribution have introduced the new Pro-J touring car setup tools. First up is the 3mm to 9mm ride heigh gauge. Offering fine 0.2mm increments in the 3mm to 6mm range the gauge offers a more coarse 0.5mm increments for the 6mm to 9mm range. The tool is machined from high-quality aluminium, it comes black anodised and with laser-etched markings. The second new part is the conventional droop gauge. Designed for “under arm” measurements the tool offers a -3mm to +10mm range and like the ride height gauge it is made from black anodised and laser-etched alloy.

Continue reading here

August 19, 2016

Tekno introduce revised SCT410 bumper & shock parts

Coming from Tekno RC are a revised SCT410 bumper as well as revised shock parts. Starting with the bumper, the front skid plate has returned to the SCT410 bumper by popular demand. This change brings increased durability and chassis protection to the front of the truck. For those that would prefer the added ground clearance, the skid can be easily removed. The part is fully compatible with all generations of the SCT410 and requires one M3x8mm cap head screw and two M4x15mm flat head screws.

Continue reading here