Red RC » Products

October 26, 2015

Yuki Model Amass T-type connectors

Yuki Model have introduced the Amass T-type connectors. Compatible with the iconic Deans plugs the connectors are of a new design with a rear cap that does away with the need to shrink-wrap the wires and solder posts, resulting in a cleaner looking and easier to handle connector. The cap features an inner partition wall that separates both poles so they will not short cut and the metal connector plates sport a high-quality gold-plating for reduced resistance and minimised burn-off for best possible durability.

Source: Yuki Model [yuki-model.de]

October 26, 2015

MIP TLR 22T 2.0 17.5T Pucks drive system

MIP have introduced the 17.5T Pucks drive system for the TLR 22T 2.0 race truck. The aluminium based drivetrain system which aluminium diff outdrives, aluminium C-CVD bones, and replaceable plastic orange wear pucks that take the place of inferior steel pins. This combination greatly increases the longevity of the drivetrain and most importantly decreases the drivetrain’s overall rotating mass by around 50 percent The decrease in weight directly results in quicker acceleration, deceleration, and lower motor temps especially in stock racing classes.

Source: MIP [miponline.com]

October 23, 2015

Yeah Racing TT02B aluminium conversion kit

New from Yeah Racing and made for the Tamiya TT02B 4WD entry-level buggy is the aluminium essential conversion kit. It includes several option parts to improve the performance and durability of the buggy such as lower A-arms, steering knuckles, ball-raced C-hubs, rear uprights as well as a front and rear shock tower and mounting hardware. The blue anodised aluminium parts are direct replacements for the kit’s plastic items and they feature stylish silver chamfering for added visual impact.

Source: Yeah Racing [yeahracing.com]

October 23, 2015

Xtreme Racing Jumpshot standard & LWB chassis

Xtreme Racing have two new carbon fibre chassis plate sets for the HPI Jumpshot truck available. Coming in standard length and a one inch longer extended variant the vertical chassis plates are made to replace the standard aluminium parts. The chassis are cut from high-quality 2.5mm carbon material and made to improve the visual impact.

View the extended chassis here

October 23, 2015

Tekno RC EB/NB48.4 universal driveshafts

Tekno RC have released a set of universal driveshafts for the EB48.3 and NB48.3 buggies. The driveshaft assemblies are CNC machined from high-quality steel alloy and black oxidised for wear resistance. They allow for extreme working angles while being durable and hard-wearing at the same time. The driveshafts excel in bumpy and rough conditions and the suspension is allowed to work more efficiently without the extra binding of a CVA assembly. This allows the vehicle to absorb bumps better with a reduced risk of “catching a rut” and flipping the car while cornering. For smoother tracks, CVAs will produce more traction and support, but universals are also well suited with slight suspension setup changes. The universals are ready to drop into the EB/NB48.3 with the use of additional 8x16x5mm bearings. One bearing is required for the inside of each wheel hub assembly and the hardened steel shafts are usable both in the front and the rear of the buggies.

Source: Tekno RC [teknorc.com]

October 22, 2015

Awesomatix A800 belt-driven touring car kit

Following a first teaser Awesomatix have released more information and images of their forthcoming A800 electric touring car kit. Looking at the renderings the new car sports several proven Awesomatix design features such as sheet material lower A-arms, rotary dampers and dual link-type upper arms but the A800 will utilise a belt drivetrain over the previous shaft drive design. The car is based on a newly design chassis with symmetrical cutouts and recessed areas for optimised flex characteristics while the centralised position of the belts greatly reduces the chance of the chassis to become tweaked under load. Additionally both the motor and battery sit nearly 4mm closer to the centre line compared to other cars on the market to allow for a very centralised weight distribution.

Continue reading here

October 22, 2015

Mibosport tire knife tool

Mibosport have introduced their tire knife tool for rubber on-road tyres. The razor-sharp fork helps to remove the performance-hampering moulding flash on touring car and formula rubber tires, thus doing away with the need to pre-scrub the tire before use in most cases. The knife is made from high-quality stainless steel and it comes etched with the Mibosport logo.

View another photo here

October 22, 2015

HPI Pro5 4 degree soft C-hub set

New from HPI Racing and made for the HB Pro5 touring car is a soft C-hub set. Coming as pairs and including kingpin bushings the steering knuckle carriers with four degree built-in castor are made from a softer composite material and they are designed to fine-tune the handling of the car in various track conditions.

Source: HPI Racing [hpiracing.com]