Red RC » Products

October 22, 2015

Losi Night Crawler 2.0 RTR rock crawler

Losi have introduced the Night Crawler 2.0 ready-to-run rock crawler. Utilising an aluminium twin vertical plate chassis design the vehicle also features heavy duty front and rear worm-gear drives, a zero Ackermann steering, moulded 4-link suspension, 4″ adjustable aluminium shocks and a LiPo-ready crawler-programmed speed controller. Also included is a 35T Dynamite crawler motor and a high-torque steering servo. The set is rounded out by a full range Spektrum SR310 receiver, beadlock wheels with red chrome rings and grippy crawler tyres as well as rock lights and an LED light bar.

View the features and more photos here

October 22, 2015

Serpent SRX4 optional parts

Serpent have new option parts for the SRX4 1/10th scale 4WD buggy available. The range includes a new front anti-roll bar mount, front outer titanium-nitride coated suspension pins, 40 shore shock O-ring seals, an assortment of high and low spring cups as well as a 24 tooth slipper shaft pulley and black anodised aluminium wing washers. On top of that Serpent now offers an exchange program for the front lower A-arms. The first batch did not meet the company’s quality standards with the parts suffering from captured air bubbles that had a negative influence on the durability. The updated v2 arms offer improved durability and also a beefed up design to further enhance crash resistance. The new arms are available through Serpent’s distributor and dealer network.

View the other new parts here

October 22, 2015

Schumacher peripheral touring car dampers

The Schumacher peripheral damping system has been developed for touring cars to help minimise tyre contact patch load fluctuations, caused by small bumps in the track surface. This means the tyre remains in contact with the ground more often, resulting in more grip and improved lap times. The damping characteristic is dependent upon the position of the piston within the shock body. The damping is softest when the piston is at the bottom of the shock, at which point the peripheral volume is at its greatest. Conversely the damping is hardest when the shock is at the top of the body, and the sleeve has the smallest opening. As a consequence of this, the damping characteristic progressively increases with bump/roll, compared to the kit damper assembly which offers linear damping throughout the damping stroke. The dampers are supplied in pairs to fit the Schumacher Mi5evo, but will also fit other touring cars on the market. Spare parts are available separately to update current Mi5evo shocks.

Source: Schumacher [racing-cars.com]

October 22, 2015

STRC Ascender aluminium option parts

ST Racing Concepts have several new aluminium option parts for the Vaterra Ascender off-road truck available. First up are CNC-machined aluminium rear lockouts with oversized 5x11mm bearings. The parts replace the stock plastic nylon pieces with more precise parts, eliminating flex and enhancing durability with the included, larger 5x11mm bearings. The lockouts are available in scale black, gun metal, and natural silver anodising and they come in pairs.

Continue reading here

October 22, 2015

Tuning Haus precision thread-on setup wheels

Coming from Tuning Haus and designed on cooperation with Randy Caster are thread-on setup wheels for 1/10th touring cars. Coming in a set of four wheels they help to get critical adjustments like camber and toe-in just right as they keep variances like wheel, insert and tyre diameter out of the equation. Different from other setup wheels the Tuning Haus parts further simplify the process by threading directly onto the axle; eliminating the need for a separate wheel nut. They are perfect for the use with 1/10 touring cars, Formula chassis, drift cars, and others with 4mm threaded axles. Manufactured from billet aluminium and anodised black, they feature durable rubber O-rings and come packed in a convenient storage case.

Source: Tuning Haus [tuninghaus.com]

October 22, 2015

Vision Racing Cougar KF rear camber brace

Vision Racing have introduced a 3mm carbon fibre rear camber brace for the Schumacher Cougar KF models and Cat K1 Aero. The brace gives four mounting positions in one mount, eliminating the need to change mounts to adjust the buggies’ chamber link lengths. The lengths provided are 33.5mm, 38mm, 42.5 and 47mm.

View another photo here

October 22, 2015

Yokomo announce new 190mm Formula car

Coming this Winter is Yokomo’s all-new 190mm 1/10th Formula pan car kit. The yet nameless car will use a newly designed 2.5mm main chassis specially developed for shorty battery packs. It offers a flexible battery layout, a floating servo mount, long side links and a sliding rear centre pivot. The front suspension is completely redesigned compared to the previous model and it will allow for inline or trailing wheel axles to adjust the steering characteristics. Included in the kit is also a large volume centre shock absorber and a 7075 duraluminium motor pod. More information will become available in November with the kit being set to hit the stores in the second week of December.

Source: Yokomo [teamyokomo.com]

October 21, 2015

Team Orion .21 V2 nitro engines

Team Orion have two new .21 nitro competition engines for off-road and on-road applications available. Starting with the buggy engine, R21 Racing Team V2 is the evolution of the popular buggy 3-port racing team and it received some subtle updates such as a black-coated 60mm diameter cooling head for improved heat dissipation and lower running temperatures. Also new is a redesigned piston that leads to a higher RPM range. The case is black coated for a better heat dissipation and the head now features a 60mm diameter, same as the company’s factory versions for a lower running temp and increased mileage while a newly designed piston ensures higher revs.

Continue reading here