Red RC » Products

August 13, 2011

Tekin Pro4 brushless motors

Tekin introduce the new Pro4 electric brushless motor for 4WD 1/10 scale Short Course trucks. Utilising the design of the T8 1/8th scale motor, the Pro4 produces high torque and smooth power with especially chosen KV ranges to complement 2S and 3S LiPo batteries. The motors feature a 4 pole 12 slot hi-torque design, neodymium sintered magnets, high purity copper windings, CNC-machined 6061 T6 Billet aluminium heatsink can, front 5x13x4mm and rear 5x10x5mm ABEC5 bearings and dual-plug sensor wire harness for use with all sensored and sensorless controllers. The Pro4 with a diameter of 35.8mm and a length of 52.9mm are available with 3300kv, 4000kv and 4600kv ratings.

Click here to view a video of the Pro4 motor in action

August 12, 2011

Video – JConcepts Hi-Flow Short Course body

[youtube]http://www.youtube.com/watch?v=J8fQuCB4l9E[/youtube]

JConcepts introduce the new Hi-Flow Short Course body shell for most of today’s 1/10 scale SC trucks. The design goal of the body, that is introduced in time for this week’s 2011 ROAR electric off-road nationals, was to eliminate the so called parachute effect often associated with SC trucks. With big air escape areas that are easily cut out using an x-acto knife and newly designed number and name panel on the sides the body provides the best possible jumping characteristics and straight-line ability.

Source: JConcepts [jconcepts.net]

August 12, 2011

Yeah Racing lightweight flywheel & locknut wrench

The lightweight flywheel & locknut wrench from Yeah Racing is made from tough plastic material and ideal to securely hold 2-shoe or 3-shoe flywheels during clutch assembly. The tool also incorporates a 17mm hex wrench for standard 1/8 scale wheel nuts.

Source: Yeah Racing [yeahracing.com]

August 12, 2011

KM H-K1 carbon belt tensioner mount

KM Racing release an updated version of their carbon belt tensioner mount for the H-K1 1/10 scale 200mm on-road chassis. The new design provides a more precise belt tensioning and increased tightening range on the short chassis version with the 384mm belt. The mount is cut from high-quality carbon and available now.

Source: KM [km-rc.com]

August 12, 2011

Team Associated B4.1 12mm hex drive

Team Associated is pleased to introduce a 12mm hex drive front wheels for the RC10B4 and RC10B4.1 buggies. Available soon or already are plastic wheel hex adapters including shims and drive pins, B4 front axles for hex use, SC10 steering blocks to go with the hex axles as well as white and yellow 12mm hex disc front wheels. The rear hex adapter allows the TLR22 rear wheel offset to be used and the front wheels also fit the Kyosho RB5 buggy.

Click here to view the other new parts

August 11, 2011

RB 1/8th off-road tyres

Seen for the first time at the recent 1/8 scale nitro off-road European Championship in Sand/Germany, the new line of RB buggy tyres becomes available very soon. Coming in the form of three different medium to fine threads and in supersoft, soft and medium compound the tyres already showed their performance, with the only 11 lap run of the event was done using the RB Dragon thread. The tyres come either pre-glued on dish rims or as rubber only including a multi-purpose insert.

Click here to view another picture

August 11, 2011

Team Losi Racing 22T stadium truck

Following closely on the heels of the 22 Buggy Kit, the 22T Truck Kit will posses the same unique design of the 22 allowing it to be the first truck in the industry to include both a rear and mid motor completion option in the same kit. Having both of these options opens up the potential for the 22T because different parts of the country benefit from different chassis configurations, varying tracks styles and layouts as well as indoor vs. outdoor tracks. The 22 and 22T share a majority of the same parts with about only 15% of the total parts listing being new. The hard anodised aluminium chassis, stadium truck-length 12mm big bore shocks, adjustable front kick, oversized rear outer bearing, bolt-on camber blocks are just a few of the features that make the 22T different from the 22 buggy as well as a force to be reckoned with in 1/10-scale 2WD truck racing. Like the 22 buggy the 22T is packed full of innovation and expert TLR engineering.

Click here to view more pictures

August 11, 2011

T.O.P. Sabre FD Mini

Coming soon from T.O.P. Racing is the Sabre FD Mini chassis based on the successful Sabre FD 1/10 scale FWD touring car. The gear driven M-type chassis features a carbon fibre chassis plate, a red anodised bulkhead and motor mount and the power is transferred to the front wheels using a ball differential. To make use of most of today’s M-type body shells the chassis allows for short M05-class or longer Japanese standard mini class wheelbase settings by simply flipping the rear suspension arms and upper bulkhead covers.

Click here to view more pictures