Red RC » Products

April 17, 2011

Robitronic Fuel & Exhaust coolers

Robitronic have released these new fuel and exhaust coolers. The performance of today’s high powered nitro engines depends on many factors. One of the most crucial but often overlooked influence stems directly from the temperature of the fuel that enters the carburetor, the cooler the better. They offer a selection of fuel and exhaust coolers that efficiently lower the temperature of the exhaust gasses used to pressurize the fuel tank. These coolers are made from aluminum with large fins for excellent heat transfer and are available in black or red and as a complete set or separately.

Source: Robitronic [robitronic.com]

April 17, 2011

Yokomo R12 & GT500 kingpin spacers

Yokomo have released these optional kingpin spacers for their 1/12th scale R12 and GT500 chassis’. The pack of spacers includes 0.5mm (4), 1.0mm (2) and 2.0mm (2) and allow the user to adjust the ride height be placing them under the steering knuckle as shown in the photo above.

Source: Yokomo [teamyokomo.com]

April 16, 2011

Pro-Line Suburbs 2.0 M3 Buggy rear tires

Pro-Line have released their new Suburbs 2.0 2.2″ M3 (Soft) Off-Road Buggy rear tires. Introducing the next generation in indoor clay and outdoor blue-groove race tread technology from Pro-Line, the Suburbs 2.0 rear buggy tires. This tire represents the culmination of years of research, development and track testing to give you the best traction and the longest wear available. Featuring a taller tread and more pins which provide longer wear and more traction, subtle changes were made to the tread design to make them produce faster lap times on a variety of racing surfaces.

Source: Pro-Line [prolineracing.com]

April 16, 2011

Pro-Line Caliber 2.0 SC M2 tires

Pro-Line have released their new Caliber 2.0 SC 2.2”/3.0” M2 (Medium) Tires for Slash, Slash 4×4, SC10, Blitz and Ultima Front or Rear. The Caliber 2.0 SC takes tire technology to the next level by optimizing traction, control, balance and tire wear with its dual-stage design and wider contact patch. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Source: Pro-Line [prolineracing.com]

April 16, 2011

Pro-Line Chevy Silverado 1500 Pro-2 body shell

Having brought you a sneak peek at the new Chevy Silverado 1500 Pro-2 body shell, Pro-Line have released Pro-Line have released their new body for the Slash, Slash 4X4, SC10, Ultima SC and Blitz. This body features ultra-low, sleek body lines and distinctive Chevy details that will make your SC truck look good going around the track. 1 piece bolt-on number plates and side dams complete the race look.

View more images of the Silverado here

April 15, 2011

Boca Bearings MX Engine bearings

Boca Bearings is pleased to announce their new and expanded line of MX Engine bearings for radio controlled engines. RC engines have evolved and become even more powerful. Today they use more nitro fuel and come under greater thrust loads than in the past. The nitro content can dry the thin stock bearing retainer very quickly making the whole bearing susceptible to premature failure when subjected to high radial and thrust loads. These MX bearings have a unique and new internal design to increase load capabilities that allows them to work under harsher operations where shafts come under excessive side and radial load. These bearings are available in both a standard high-speed version with either chrome steel balls or races, or as a ceramic hybrid, with ceramic balls and chrome races. For a limited time Boca Bearing will be offering an additional $10 discount on all MX bearing kits. Full bearing kits are available for engines such as Nova Rossi .21/12/15/21/28 size engines, OS 15/18/20/21/25/26/28/30/32/37/40 size engines, Picco 15/21/28/40/45 size engines, Collari, Sirio and more.

Source: Boca Bearings [bocabearings.com]

April 15, 2011

McPappy Racing Brushless Dyno

Today’s brushless racing introduced new variables, such as mechanical timing, speedo timing, RPM ranges, rotor diameters on top of the rollout variable. The new McPappy Racing DIY Brushless Dyno helps you to make sense of some of that. This dyno platform will allow you to test your motors against a brushless slave motor that provides consistent resistance from test to test. It was designed to accommodate multiple test configurations: direct coupler in between both motors, direct coupler with flywheel in between both motors, offset the motors using 2 pinions, offset the motors using 2 pinions flywheel. The flywheel provides inertia resistance and the brushless slave provides constant resistance. Together they reproduce similar track resistance. The key component to this dyno platform is a huge piece of 1/4″ 6061 aluminum which acts as a giant heat sink. Two large fans and all of that aluminum mass will bring the temperature of the motors and resistors back down to room temperature very quickly. This allows you to run many tests very quickly. To find your most powerful motor and speedo combination is actually quite simple. Your overall goal is to spin the flywheel and slave motor as fast as you can with the least amount of amp draw. The McPappy Racing DIY Brushless Dyno can help you do just that. You will be able to find your strongest motors and most efficient combination of mechanical timing, speedo timing, RPM ranges, and rotor diameters.

Source: McPappy Racing [mcpappyracing.com]

April 15, 2011

Nitro Runtime Android App

Fresh from the mind of Jesse Robbers and developed by Jared Kirkwood is an Android phone app that precisely calculates the runtime of your nitro powered R/C vehicle, yet is very simple to use and understand. Pit strategy is often overlooked, and if done incorrectly can result in lost time or track position due to excessive pit stops. To use this app you enter in a few numbers and it will tell you your maximum runtime (empty fuel tank). The app will also calculate your pit strategy for your main event race, listing the recommended times that you should pit given your runtime and also the amount of runtime ‘difference’ that you have to work with. The app also provides information for a ‘risk it’ pit strategy which can be used if you are feeling confident based on your maximum runtime and the race length.

Source: Android Market [android.com]