Red RC » P On Road

July 4, 2017

RC Maker Awesomatix carbon tweak stick

New from RC Maker is the carbon fibre tweak stick for the Awesomatix A800 and A700 touring cars. Featuring a full carbon fibre construction, it is lightweight and disassembles for easy transportation. The tweak stick aids to pin the car down onto a flat surface with a single hand, whilst tightening the top deck screws with your other hand. Due to Awesomatix’ unique design not having shock towers, the tool utilises extension plates which exert even pressure onto the bulkheads left and right, front and rear. The design locates the extensions onto the bulkhead using locating lugs, which makes it quick, easy and accurate to use. Thick O-rings simply locate the extensions in place, which can be adjusted to suits the driver’s needs. Not requiring removal of anything to use, the strong carbon tube clears all spur gear sizes, as well as the antenna tube and belt tensioner. The tool fits both AM19-2 and AM19-4 upper bulkhead caps on the A800, and all top-deck configurations on the A700 without diff covers.

View more images here

July 4, 2017

Michal Orlowski joins Arrowmax

Arrowmax have announced the addition of Schumacher factory driver, Michal Orlowski to their works team. The reigning EOS 2WD champion will use Arrowmax tools and accessories to build, maintain and set-up his rides and he has the following to say about the deal:

I am very pleased to join the Arrowmax racing team. It will be a pleasure for me to use their wide range of tools and setup accessories to prepare my cars. I am looking forward to working with them in the future!

Source: Arrowmax [arrowmax-rc.com]

July 4, 2017

Reedy 540-M3 12x5x24.2 modified rotor

Team Associated have introduced the new 540-M3 12.0×5.0x24.2 Mod Rotor, Reedy’s latest tuning rotor designed for modified on- and off-road racers. Using the rotor will smooth out the low-end throttle inputs while maintaining strong mid-range power and top speeds. When competing on small and/or low-grip tracks the reduction in initial power delivery will help to provide more consistent lap times.

Source: Team Associated [teamassociated.com]

July 3, 2017

Capricorn P1-235 front chassis plate

Coming from Capricorn and made for the P1-235 1/10th scale pan car is a new front chassis plate. The updated design allows to move the servo towards the front end of the car, leaving enough room to fit a standard-size LiPo in the battery compartment and not being limited to shorty battery packs. As a result more powerful motors can be used while also allowing to play more with weight distribution.

Source: Capricorn [capricornrc.com]

July 3, 2017

Schroeder wins at North German IC Track regionals Rd3

The MAC Hamburg club played host to the third round of the North German 1/8th nitro on-road regionals, qualifying events for the German Championships later this year. In the 30 minute main final, Timo Schroeder, driving a Shepherd, at first had so settle for 2nd position until he was able to take over the lead due to a different fuel strategy. In the final minutes of the race Timo was chased by Serpent’s Merlin Depta but he brought home the victory with a margin of only 0.2 seconds in front of
Merlin on the runner-up spot and Shepherd racer Lennart Skornia in 3rd.

Source: Shepherd [team-shepherd.com]

July 3, 2017

Chris Nielsen wins at Danish 200mm Nationals Rd2

This past weekend round 2 of the Danish 200mm National Championship was held at the fun and flowing Odense track. The practice rounds saw Claus Ryeskov setting the pace with his three fastest consecutive laps in front of Rene Kjellerup in 2nd, some 0.9s down. Chris Nielsen came in 3rd, another 0.4s behind. In qualifying it was again Claus Ryeskov who set the pace, claiming the TQ position by winning the first three rounds. Chris Nielsen TQ’ed round 4 to line up in 2nd. René Kjellerup had to settle for the 3rd spot, after two good runs in Q1 and Q2.

Continue reading the report here

July 3, 2017

Infinity IF14 aluminium cooling fan mount

Creation Model has produced a limited run aluminium cooling fan mount for its Infinity IF14 electric touring car. The mount, which comes complete with a 40mm fan, fixes to the chassis behind the motor and is held in place with a single screw and incorporated mounting pin. This method of securing the mount to the chassis minimises any effects on chassis flex. Also able to take a smaller 30mm fan, two screws fix the fan to the red anodised aluminium mount.

Source: Creation Model [creationmodel.net]

July 3, 2017

Triton L4 Pro Spec V2 Elite GT .21 on-road engine

Coming from Triton RC is the new L4 Pro Spec V2 Elite GT .21 nitro on-road engine. Designed for the growing GT classes the ROAR-legal 5-port power plant was developed and hand-tuned to provide super strong bottom end, midrange and exceptional top end performance for large GT racing cars with sacrificing fuel mileage. The carburettor low speed needle and housing design has been changed to provide even easier tuning than the previous version while the crankcase has been optimised for power and efficiency by manipulating the internal volume and angles. The cooling head is milled for easier engine mount driver access and a Swiss front bearing, with a special seal designed to prevent leaks, as well as a Swiss ceramic inner bearing provide ultra low friction and longevity. The package is topped off by an all-new DLC crankshaft for added wear resistance and durability.

View the features and another image here