Red RC » P Off Road

January 26, 2017

Lee & Chiang successful at Urban Astro Buggy Champs

Singapore’s electric buggy racing season flagged off this past weekend at the first round of the 2017 Urban Astro Buggy Championships. Run at Urban PlaySpace in downtown Singapore, racers were greeted with a track layout sporting a new wall-ride as well as an elevated straight. In the 2WD class, Esmail Apandi (Xray) TQ’ed in front of Nicholas Lee (Yokomo) and Kamen Koh (Serpent). In the finals, Esmail took the leg 1 win after an early mistake by Nicholas. In leg 2, Nicholas bounced back with a win as Esmail tumbled in the tricky front-double section. With Kamen finishing second in both legs 1 and 2, there would be a 3-way showdown in the final leg. A3 then was a close affair with Esmail holding the early lead after mistakes by Nicholas dropped him to fourth. Never giving up, Nicholas put in a masterclass performance to close rapidly on Esmail. At 90 seconds remaining, Nicholas took advantage of a small opening as Esmail ran wide to take the lead. Nicholas held off the determined Esmail to win an exciting Leg, taking the overall win.

Continue reading the report here

January 26, 2017

ProStar B6 titanium hinge pin set

Coming from ProStar R/C and made for Team Associated’s B6 series of buggies is a titanium hinge pin set. The 8-piece kit replaces the stock parts with high-quality Grade 5 titanium upgrades that will not rust or break. Included are four 3x34mm front bulkhead pins as well as two 3x26mm and two 3.5x48mm shafts and the kit is available now.

Source: ProStar R/C [prostarrc.com]

January 25, 2017

Tekno NB48.4 1/8th nitro buggy kit

Following the introduction of the EB48.4 a few weeks back, Tekno now also revealed the revamped NB48 platform. The latest .4 kit features a new CNC-machined 7075 aluminium chassis with improved wear characteristics, a revised steering geometry and Ackermann plate, a bearing supported spindle and carrier design, a revised wide rear pivot suspension geometry as well as new universal driveshafts for a more efficient drivetrain. Other changes include CNC-machined 4×1.9mm flat/flat delrin pistons and rod guides, aluminium bleeder shock caps to allow building emulsion, vented and non-vented shocks as well as new low-frequency shock springs and a fighter yet inspired bodyshell.

View more images and a list of all new features here

January 25, 2017

Futaba O.S. Speed Tuned high-performance servos

Futaba have introduced a special line of “O.S. Speed Tuned”-branded servos for 1/8th and 1/10th scale applications to celebrate the two company’s long-running collaboration. First up is the Speed T1 BLS571SV (0.08s/11kg-cm) low profile servo for 1/10th touring car and off-road classes. It offers hardened gears, ceramic ball bearings and aluminium top and middle sections. Next up is the Speed R1 BLS371SV (0.10s/19kg-cm), a standard-size servo for 1/8th on-road applications featuring hybrid gears, ceramic bearings and an aluminium upper case and middle section. Last but not least is the Speed B1 S9373SV (0.06s/24.6kg-cm), an all-alloy case servo for buggy racing, again with hybrid gears and ceramic bearings. All servos are high-voltage compatible and they come in a special red and black anodised design and with dark-toned servo leads.

Source: Futaba [futaba.co.jp]

January 25, 2017

Aaron Stringer doubles at Pine Hills race

The recent Pine Hills race saw Mugen’s Aaron Stringer walking away with a double win in the Nitro Buggy and Nitro Truggy classes. Aaron would grab the top qualifying honours in Buggy while Mitch McCallum (Kyosho) went fastest after the qualifiers in Truck. The Buggy final then saw Aaron bringing home the win from Mitch McCallum and Alex Bernadzik (Team Associated) in second and third respectively. In Truggy it was again Aaron who walked away with the hardware while Caleb Noble (Mugen) and Mitch McCallum (Mugen) had to settle for second and third.

View the Truggy podium here

January 25, 2017

ORCA 6300mAh LCG HV Gen 3 LiPo battery pack

ORCA have introduced their new 6300mAh LCG HV Gen 3 high-voltage LiPo battery pack. Offering a nominal voltage of 7.6V the 2S pack is of low centre of gravity specifications and only 22.5mm tall compared to the standard 25.1mm which can lead to high corner speeds. The pack weighs in at 272g and it can be safely charged up to 8.7V but it will also show exceptional performance when filled to the currently race-legal 8.4V.

Source: ORCA [orcarc.com]

January 25, 2017

T-Works TKI3/4 carbon fibre centre gearbox plate

Coming from T-Works and made for the Kyosho MP9 TKI3 and TKI4 kits is a carbon fibre centre gearbox plate. Designed to replace the standard aluminium part the carbon fibre plate is of a very low weight and it adds some visual impact to the centre part of the buggy.

Source: T-Works [rc-tworks.com]

January 25, 2017

Team Magic E5 stainless steel skid plates

HRC Distribution have introduced new stainless steel skid plates for the Team Magic E5 monster truck. Machined from high-quality material and coming with a natural silver finish, the plates not only reduce the chance of damaging the chassis during those demanding bashing sessions but they also lower the truck’s overall centre of gravity for a more planted feeling. Available are a front and a rear chassis guard with both including the needed mounting hardware.

View the rear skid plate here