May 24, 2019

Rheinard & Wilck put wins on the board at RROC

Defending Champion Marc Rheinard and his Infinity team-mate Viktor Wilck put wins on the board at the Reedy Race of Champions with Rheinard winning the more interesting of the Round 2 encounters at Steel City RC Speedway.  Starting third on the grid, Rheinard took almost the entire race to get by pole man Jan Ratheisky, the pass coming with two laps to go.  With contact during the pass hampering Round 1 winner Ronald Volker who was running third, it would be the the other of the Round 1 winners Meen Vejrak who would finish second with Ratheisky third and Volker 4th.  Wilck would take his win from fifth on the grid ahead of Akio Sobue and Ryan Cavalieri.  Starting on pole, Cavalieri built up an early gap helped by Wilck making contact with team-mate Sobue and having to wait while the battled over second.  The offroad star soon had the touring car Pros back on his case with them each going through on separate occasions when the Yokomo driver ran wide.

Continue reading this report here or view our complete event coverage here.


May 24, 2019

Volker & Vejrak open Reedy Race with wins

The 22nd running of the Reedy Race of Champions is underway, with the sun finally turning up after rain washed out yesterday’s practice day.  With just two heats of racing per round for the 22 car field, it was Meen Vejrak who registered the first win on the events debut at the Steel City RC Speedway.  Starting from pole, the Yokomo driver managed to stay out front throughout the more stacked of the two races despite pressure from Viktor Wilck who made contact with the Thai driver on more than one occasion.  Behind them defending champion Marc Rheinard would open his campaign with a P3 after Jan Ratheisky got the jump on him at the start that saw a good battle between the two Germans.  In the other encounter, which featured no less than 8 US drivers, it was the visitors that came through to complete the Top 3.  Starting 10th on the grid Ronald Volker was up to third by the hairpin on the opening lap and soon after was out front for a dominant win.  Lining up 11th for the start, RROC debutant Lucas Urbain would take his Awesomatix through to second with young up & coming Japanese star Takuma Sasaki third.

Continue reading this report here or view our complete event coverage here.


May 24, 2019

Kasekamp & Lainemae win at Estonian Off-road Nats Rd1

Round 1 of the Estonian Off-road Nationals was held at the Tartu RC track recently featuring all sorts of scales, ranging from 1/10th scale up to 1/5th Large Scale, making for ever changing conditions on the astroturf and red clay track. In qualifying it would be Hendrik Lainemae setting the pace in both E-Buggy and Nitro Buggy. The trend would continue in the finals. Nitro Buggy would see a lot of interesting situations for the top drivers. Hendrik would lead the field for the start of the 30-minute final but flamed out on the in-lap for the first round of pit-stops. Karl Kasekamp would take the lead, closely followed by Robin Ilus. Some 14 minutes into the race, Karl would pit after mishearing someone else being called in. Robin Ilus would suffer a flame-out and a shaky last pit stop for Hendrik would give Karl a safe gap to pit an extra time before the end. On the last laps Hendrik would pass Rainer Ressar, who had a mostly clean recovery drive after his 1st lap which dropped him to last, for 2nd position.

Continue reading the report here


May 24, 2019

Dario Balestri sets the pace in The Netherlands

Infinity’s Dario Balestri set the best three lap time in controlled practice for the 1/8th scale class at Round 2 of the Euro Nitro Series Championship in Rucphen, The Netherlands.  It was very close, however, as less than one tenth of a second covered the top seven drivers over their three lap times. “The car was good, the engine was really good – it was just really difficult to find the right balance” was how the current ENS Champion described the practice sessions.  He will try some more small changes tomorrow “until the car is easy to drive”, aiming to find more rear traction in his IF18.

Continue reading this report here or view our complete event coverage here.


May 24, 2019

Leo Arnold Top Seed at Dutch ENS

Leo Arnold will carry the number one on his car throughout tomorrow’s four scheduled rounds of qualifying here in the Netherlands.  The French driver’s time just held off a late charge from Jilles Groskamp, who ended up four hundredths of a second slower over the three lap times with his Infinity team mates Teemu Leino and Milan Holthuis putting in the third and fourth best times, and Thilo Todtmann rounding out the top five.

Continue reading this report here or view our complete event coverage here.


May 24, 2019

SWorkz S14-3 aluminium rear hubs

SWorkz have announced the release of new rear aluminium hub carriers for the S14-3 1/10th scale 4WD buggy. Machined from high-quality alloy material and sporting a symmetrical design, allowing to use them both on the left and the right hand side, the sturdy hubs will improve bearing life and overall durability. Three upper camber link options give plenty of roll centre and camber gain possibilities while the black anodised surface makes for factory looks.

View another image here


May 24, 2019

Yeah Racing T3-01 G45 steel drive shafts

Yeah Racing have introduced their new G45 steel drive shaft set for the popular Tamiya T3-01 Dancing Rider trike. The design is a change back to the traditional axle style of mounting for a more secure way of installing the wheels. Included in the set are the driveshafts, alloy wheel hex adapters and track width shims as well as miscellaneous hardware.

Source: Yeah Racing [yeahracing.com]


May 24, 2019

Infinity IF18 clutch tool

Infinity has expanded its accessories line-up with the release of a clutch tool for their IF18 1/8th nitro on-road kit. The new tool allows quick and easy adjustment of the amount of spring tension on your clutch nut without disassembling the clutch bell. Featuring the Infinity logo, the tool is finished in black and red to match the brands distinguishing colours.

View another image here