Red RC » P Off Road

April 25, 2016

Jiri Mara successful at Czech Open series Rd2

Round two of the popular Czech Open series for 1/8th nitro buggies was held at the Horni Jeleni track over the weekend. The qualifying was a very tight affair with local star Max Götzl, Jiri Mara, Tomkas Kapicka and Kaja Novotny all being in the mix for the overall TQ. Eventually Jiri would come out fastest after the qualifiers from Max and Kaja in second and third respectively. After a couple of changes for the semifinal Kaja, who struggled a bit with overall grip, managed to take the pole position for the A-main that saw the top 4 drivers quickly pulling away from the field. Around the 15 minute mark Jiri and Kaja had opened a gap on the chasing pack with both swapping positions several times. Some 26 minutes into the race Kaja had to let Jiri go as the Xray driver encountered a small drivetrain problem with a stone in the clutch bell hindering his car’s performance. This meant Jiri Mara (Serpent) would be able to cruise to the win with Kaja taking the runner-up spot from Tomas Kapicka (Kyosho).

View the final result here

April 25, 2016

Alex Zanchettin wins Italian Nitro Buggy opener

The opening round of the Italian Nitro Buggy National Championship was held at the Pista Le Pescine track in Rosignano. TLR’s Alex Zanchettin was on a mission all weekend, taking the TQ after the three rounds of qualifying and grabbing the win in the main final, ending a long winning drought. The runner-up spot was snatched by Riccardo Berton (Kyosho) who ended the A-main only 3 seconds shy of Alex. The final podium spot was obtained by TLR’s Marco Baruffolo who recovered back to third after a troubled start.

Image: Marco Petella

April 25, 2016

Upgrade RC Bermudas aluminium wing buttons

Available now from Upgrade RC are the Bermudas aluminium wing buttons. A one size fits all for both 1/8th and 1/10th scale vehicles the mounting plates are machined from high-quality aluminium with the unique triangular design being a welcomed alternative to the majority of round wing buttons. The wing mounts use either flat or button head M3 screws and they are available in black or blue anodising.

View another image here

April 25, 2016

Yeah Racing 60mm Shock-Gear shock absorbers

Based on their 50mm and 55mm Damper Gear shock absorber sets Yeah Racing have introduced the new, longer 60mm variants for 1/10th scale rally and off-road cars. The shock absorbers are of an all-aluminium design with threaded alloy shock bodies, alloy upper and lower shock caps as well as an alloy spring pre-load nuts. Other features include titanium-nitride coated piston rods and volume compensators and the shock come with an assortment of pistons in standard and V-hole variants to fine-tune the compression and rebound characteristics. The set, that includes a total of four shock absorbers, is rounded out by an assortment of springs and the dampers are available in grey or silver anodising.

View an image of the silver colour variant here

April 25, 2016

Reno Savoya dominates French 1/8th Buggy Nats Rd2

Round two of the French 1/8th Buggy Nationals was held in Auxerre and the event saw TLR’s Reno Savoya dominating the proceedings by taking the TQ after the qualifiers and by coming out successful in the 45-minute A-main. Right from the start of the main Reno jumped into the lead to control the gap on the field. At the end the TLR would end the race two laps in front of team mate Jerome Sartel while Guillaume Hebert (Xray) rounded out the top 3 result.

Image: Circus RC [circusrc.com]

April 25, 2016

Tessmann & Maifield win at Lonestar Challenge

The 3rd annual The Dirt Lonestar Challenge was held at Thornhill Racing Circuit in Hutto, Texas over the weekend. Host of the 2016 ROAR Offroad Fuel Nationals, the track recently received a cover to make it one of the, if not the largest off-road indoor facility and for the race The Dirt’s Joey Christensen also shaped a challenging new track layout. The Top Qualifier honours in the premier class of 1/8th Pro Buggy went to TLR’s Ryan Maifield but it was HB’s Ty Tessmann who came out fastest in the main final, leaving Ryan Mailfield and Ryan Lutz (Tekno) in second and third respectively.

Continue reading here

April 23, 2016

Team Associated limited edition B5/B5M kit

Coming from Team Associated is a limited edition run of the rear motor B5 1/10th 2WD buggy including a B5M conversion kit. Based on the original B5 the kit includes all needed parts to convert the vehicle into a mid-motor B5M, including the main chassis, suspension and gearbox parts. Included is also the B5 bodyshell but the needed B5M body has to be purchased separately.

Source: Team Associated [teamassociated.com]

April 22, 2016

Reds Racing introduce new Quattro clutch front plates

Reds Racing have introduced two new front plates for the Quattro clutch system. They allow for more pre-tension on the springs and better snap, typically used in truggy applications. The plates are available in XH and XXH variants, adding to the already existing L and H plates. Reds Racing recommends to use the new Pre-Tension tool for an easier assembly of the clutch.

View the clutch tool here