Coming from SMJ and made for Protoform’s IFMAR World Championship wining P47 1/10th 200mm nitro touring car body shell is a gurney flap rear wing. The wing was developed to maximise rear downforce and stability with the overall amount being adjustable by trimming the upper gurney flap part. Moulded from high-quality polycarbonate the wing includes end plates and double sided tape.
Coming from Avid are several new carbon fibre wing optionals such as a wing mount brace for the B6.1 buggy and wing buttons. Starting with the wing mount braces for Team Associated’s B6.1 buggy, this Do It Yourself product is a fun mod to create a carbon sandwich on the kit B6.1 wing mounts to keep them from permanently bending after a hard crash. The setup includes everything needed except for the drill.
Pirani RC have introduced their new 20T and 25T HD clutch pinion gears for all 1/8th on-road cars with ARC or Capricorn clutch bells. Sporting a 0.8 module for higher effienency and a hard-coated surface for wear, the gears will improve the drivetrain’s performance and durability. The 20T 1st gear and 25T 2nd gear pinions are available now.
Source: Pirani RC [piranirc.com]
JConcepts have introduced their new S1 body shell for JQRacing’s TheCar Black Edition nitro and TheE-Car Grey Edition electro buggy kits. First developed for the 2012 IFMAR World Championships, the Silencer has been a mainstay in the JConcepts product line which is available for a number of difference vehicles in the market. The JQRacing buggy has enjoyed a successful run world-wide and JConcepts has now created the iconic Silencer as a drop-fit for the vehicle. For the precise fit, the design has undergone major changes to match the JQ chassis side guards and body mount positioning. The Silencer stance cockpit allows ample room for the air cleaner and fuel tank access, a smoother high-speed windshield transition and increased flow around the engine heat-sink. A deep recess around the engine compartment with dual channeling out the rear provides air escape along with rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires. The extended runner features are placed on the rear-end of the body enhancing the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over the pipe, fuel tank and electrical / linkage make up the main pods. The end result has the body looking extremely low-profile with heavy JConcepts edginess and appeal. The Silencer is capped off with a cock-pit “shark fin” for more high-speed tracking stability and increased roof stiffness. The body is available in lightweight and ultra lightweight variants and includes window masks and a decal sheet.
SMJ have introduced a wireless charger set for the Sanwa M17 transmitter. The charger was designed to simply place the radio on top of it, allowing to charger its batteries without removing them from the transmitter. The charger bay is also usable for smartphones with wireless charging capabilities. Not includes in the set is the needed AC adapter.
Infinity has released a newly designed gear differential for their IF14 electric touring car. Offering smoother rotation and higher rear traction in all conditions, the differential shafts are now supported by ball bearings for added stability and consistency during runs. Another feature of the new diff design is that the outdrive cups can now be replaced from the outside without the need to open the diff making maintenance quick and easy.
JConcepts have introduced new option parts for street eliminator converted Team Associated SC6.1 trucks in the form of a carbon fibre wheelie bar set and a carbon fibre shock tower. The wheelie bar kit contains carbon fibre rails, aluminium stand-offs, bearing holder and inner race support along with rubber sealed bearings and steel 3mm hardware. This assembly has been designed to work with a 3D printed part available separately from JConcepts’ Shapeways store. The #2714TD bulkhead skid for the wheelie bar is necessary to use existing SC6.1 parts along with the wheelie bar conversion parts to compete the assembly. The JConcepts item replaces #AE71125 which is part of the rear bumper assembly on the SC6.1. An accessory 3D printed net (2715TD) is additionally offered on the JConcepts Shapeways Store. The net is designed to work with conversion parts and can be purchased in white or black colours to match different builds and creations.
Round 4 of the 2019 BRCC N.E.O.S. was held in Puerto Rico last weekend. Raymond M. Soto took the overall GT class TQ after the qualifiers, however it would be Samuel Zayas with the win in the A-main final from Raymond on the 2 spot. Godfrey Franco would round out the top 3 for an all-IGT8 podium.
Source: IGT8 [igt8.com]
