April 14, 2019

Awesomatix A800FX FWD car kit – Teaser image

Awesomatix have released a first official teaser image of their forthcoming all-new A800FX front-wheel drive touring car kit. Under development for some time now and after intense testing in various different conditions, the overall design has been finalised. In true Awesomatix fashion the car will feature easy weight bias adjustment, an ultra-low centre of gravity as well as a low-friction drivetrain. More details will be released in time for the release.

Source: Awesomatix [awesomatix.com]


April 14, 2019

Jason Mardon doubles at Big Barn Shootout

The recent 2019 edition of the Big Barn Shootout was also round 1 of the Western Offroad Race Series WORS. The Series travels though British Columbia with five rounds of 10th scale and 8th scale classes. This year saw the entries top 430 with over 130 drivers with radios in hand. Entries were from Ontario, the Northwest USA, and the three western provinces. Ty Tessmann joined the fun in the feature 8th Scale Buggy classes. 1/10th qualifying would finish up with Jason Mardon TQing in 2wd Buggy with Dan Schellenberg behind. Schellenberg in return would TQ in Truck with Mardon behind. Both drivers also raced secondary classes, but it was clear the 2WD classes were going to require full attention from both drivers through mains day.

Continue reading the report here


April 12, 2019

Schumacher US Grand Prix 2019 – Announcement

The Schumacher US Grand Prix 2019 will be held at RC Madness, Enfield, Connecticut on the 10th and 11th of August. The race will see the usual Modified, 13.5T and 17.5T buggy and truck classes with Schumacher spec tyres being mandatory for all categories. As a special guest Schumacher’s Michal Orlowski will be in attendance and sign-up is available here.


April 12, 2019

Xray GTXE 1/8th electric GT kit

Xray are busy adding more 2019 specification kits to their line-up with the electric-powered GTXE 1/8th on-road kit being the latest vehicle to receive the ’19 treatment. The car received some subtle changes to further up consistency and overall performance with the first area to receive updated being the front and rear gear differentials.

Continue reading here


April 12, 2019

SRC DSE 190mm touring car body shell

Italian company SRC have finally unveiled their all-new DSE 190mm touring car body shell. The EFRA #4068 homologated body features a special design for improved rear traction and stability. A flowing front end shape with hood reinforcements will provide enhanced steering response thanks to strengthening the front wheel arch section. To this adds an exclusive side panel design that adds to the overall rigidity of the body that will become available in Xlight and Super-Xlight variants as well as pre-cut for most of today’s touring cars. Supplied with the lid is a new-design 3-dams rear wing that will increase overall downforce in combination with the new-style front roof design.

View more images here


April 12, 2019

Hudy 5g & 10g pure Tungsten weights

Hudy have introduced their all-new pure tungsten balancing weights. Made from rare pure Tungsten material, known for its very high density and thus heavy weight, the 5g and 10g weights are a lot smaller than conventional brass or steel balance weights, allowing for easier placement and a cleaner layout. The super small weights also make for lower centre of gravity thanks to their low-profile design. The weights are available separately in 5g and 10g specification.

View more images here


April 12, 2019

Xray XT2 95mm 2.5mm pin rear driveshaft

Coming from Xray and made for the XT2 stadium truck is a 95mm rear driveshaft with 2.5mm cross pin. Made from Hudy spring steel the shaft offers exceptional durability while still being light of weight. The 2.5mm cross pin design ensures a long lifespan and the driveshaft is recommended when using Xray’s adjustable #325002 ball diff.

Source: Xray [teamxray.com]


April 12, 2019

R246 MR03W MML & MR03 RM alloy motor mounts

Kyosho have introduced two new RC Planning R246 aluminium motor mounts for the MR03W and MR03 RM Mini-Z cars. First up is the MML low motor mount for the MR03W MM-type 98mm wheelbase cars. The motor pod allows for axle ride height and fine gear mesh adjustments and it requires additional parts such as the MML roll damper/oil damper set, 2mm narrower rear wheels and the LM differential shaft. Includes in the set come the hybrid aluminum and carbon fibre rear power pod, rear axle inserts as well as an aluminium motor mount.

Continue reading here