The Fururing Raceway in Furulund, Schweden held their Easter Race this past weekend in 1/8th nitro and electric classes. Kyosho’s Jessica Palsson was in control of things in the nitro class, taking the overall TQ after a clean sweep and also bringing home the win in the 45-minute main final with a 2-lap margin on HB Racing’s Hampus Berg. Young Ludwig Albertz (Kyosho) came in 3rd to round out the podium some four laps down.
Image: Jessica Palsson
The Protoform Nitro Grand Prix was held at Steel City RC Speedway win Fontana, California over the weekend. The event attracted some of the country’s fastest nitro on-road racers as well as guests from Australia, Italy, Japan and Thailand and in the premier 1/8th IFMAR IC Track class it was Australia’s Jeff Hamon with the overall TQ, however brake issues in the 60-minute main final meant the Mugen driver wasn’t able to hold the top spot, having to let Infinity’s Lamberto Collari go. Jeff however managed to defend the runner-up spot from 2nd place qualifier, Infinity’s Takaaki Shimo from Japan.
Made for Xray’s T4 touring car platform is RC-Cox’s new adjustable battery mount. Constructed from carbon fibre and black anodised aluminium, the battery mount allows to shift the battery pack forth and back as well as left and right in order to achieve a proper weight distribution with both low and high weight LiPo battery packs. Carbon fibre tabs locate the battery, doing away with the need to use fibre-reinforced tape and allowing the battery to slightly float which does away with unwanted chassis tweak. The set is usable with the 2016 to 2019 variants of the T4.
The recent 2019 edition of the Psycho Nitro Blast brought together some of the US’ fastest off-road racers and with over 700 entries and 24 hours of practice, it was a mind blowing experience for many. In the 40+ Nitro Buggy class A-main Paul Ciccarello led of the of the race but in the end it was veteran racer, Greg Degani with the win from Paul on the runner-up spot. Donald Elliott would round out the top 3.
The 2019 Mile High Indoor Championships were held at 5280 Raceway in Denver, Colorado this past weekend. In the premier Touring Modified class it was Awesomatix’s Sam Isaacs with the TQ and win from Xray’s Keven Hebert on the 2 spot. Awesomatix’s Kyle Klingforth would round out the podium in 3rd.
The 2019 edition of the Asian Onroad Championship kicked off this past weekend at the RCI V2 track in Shanghai, China. The event started off with open practice on Thursday with the finals being held on Saturday, allowing the drivers to visit the Formula 1’s 1000th race on Sunday. RC racing wise, the best was of course was saved for last and all the racers in attendance would agree that some of the best racing was ran in the Modified Touring class. TQ Yugo Nagashima drove the wheels off his car to earn the top spot but the win was not a guarantee for him or for anyone. Nagashima, JJ Wang and Takuma Sasaki would each take a win in the finals and when all the racing had been ran, it would come down to other finishing positions and tie-breakers to determine the winner. Wang and Nagashima both and a 1st and a 2nd, but with a slightly faster finishing time, Nagashima would be declared the overall winner with Wang taking second and Sasaki taking third.
Continue reading the report here
Coming from Yokomo is their latest addition to the Racing Performer line of batteries, the Ultra 5500mAh HV SLCG pack. The high voltage battery utilizes highest performance 140C silicon-graphene technology cells to provide higher power, more speed and acceleration. The super low centre of gravity pack measures 138x46x20mm and it weighs in at 235g. Compared to the conventional LCG battery, it provides an even lower CG and allows racers to add steel or brass weights under the battery for keeping the weight as low as possible, allowing the chassis to perform better, especially on high-grip surfaces. The pack will hit stores at the end of April.
Source: Yokomo [teamyokomo.com]
SWorkz have introduced their new Velocity 2.0 lightweight body shell for the S14-3 buggy. With the help of a new moulding technology the body is about 40 percent lighter compared to the standard shell, helping to lower the overall centre of gravity, improve corning in high-bite track conditions and also helping with acceleration. The body comes made of high-quality polycarbonate material and it includes a front tower wing, window masks and a sticker sheet.
Source: MW RC Cars [mwrccars.at]
