Red RC

March 4, 2019

Jade Lim wins at Malaysia National League Rd1

The opening round of the Malaysia National League was held at the Putrajaya Offroad RC track this past weekend. The technical, rutty and rough track made for some challenging conditions and SWorkz’s Danny K would make the best out of the situation, taking the overall Pro Nitro Buggy TQ from Team Associated’s Jade Lim in 2nd. Jade would in turn snatch the pole position for the hour-long A-main event after the semifinals and he also went on to win the 60-minute race a lap in front of JQRacing’s Adam Fikri as Kyosho’s Taqi Hunterz completed the top 3 another lap down. Danny K and Mizan would round out the top 5 podium result.

Source: JQRacing [jqracing.com]

March 4, 2019

Xray XB4 81mm ECS front driveshafts

Xray have introduced their new double joint ECS 81mm front driveshafts for the XB4 off-road buggy. Equipped with durable 2.5mm pins the dual joint design driveshafts greatly reduce wheel chatter at high steering angles, and they make for increased stability, steering and cornering speed compared to standard single joint driveshafts. In addition landing after jumps is also improved- The driveshaft is of a fully rebuildable design, made of high-quality Hudy spring steel and it comes as single item.

Source: Xray [teamxray.com]

March 4, 2019

1/5th scale World Challenge – Report

Steel City RC Raceway of Fontana, California held the 1/5th scale World Challenge this past weekend. Unfortunately the race suffered from mixed weather and a somewhat low turnout but racing was still hot and in the STC class it was former World Champion, Markus Feldmann with the TQ and win from Matias Garcia 2nd and Luis Diaz 3rd. 1/5th GT was TQ’d by Frank Pena but in the 30-minute A-main it was Tom Wong with the win from Frank Pena in 2nd. Greg Shum would round out the top 3. The 20-minute Spec 5 A-main was won by top qualifier, Tony Tam from Ken Gerberding and Gary Kyes.

Continue reading the report here

March 4, 2019

Lovan Winter Series Rd3 – Report

The third and penultimate round of the 2018/19 Lovan Winter Series was held this past weekend. The organisers yet again created a fast but challenging track on the huge 40x30m track surface. As always, the very liberal rules regarding tyres, motors and additive meant the competitors had to be well prepared in order to fight for the available podium spots. Entries were a bit less this time, but the field was more than competitive to provide exciting races in the five available classes of 1/12 GT and LMP, Formula and Touring Stock and Modified. The latter only saw seven entries, but among those entries were two former European Champions; Stock Touring Champion Rémi Callens and 1/8th nitro Champion Robin D’hondt. It was also interesting to notice that this class did feature the most youngsters with Liam Van de Wouwer, Athan de Witte and Florian Joos.

Continue reading the report here

March 4, 2019

Ryan Lutz trifecta at RC Pro South Series Rd1

Round 1 of the South division RC Pro Series was held at Thornhill Racing Circuit in Hutto, Texas this past weekend. Agama’s Ryan Lutz was in control of things in the Pro Nitro Buggy, Nitro Truggy and Pro E-Buggy categories as he took the TQs in all classes. His dominance would continue in the A-mains as in the 45-minute long Pro Nitro Buggy A-main Ryan took the win some three laps in front of HB Racing’s Dillon Caldwell with Agama’s Jake French coming in 3rd some 15 seconds behind Dillon. Robbie Darby and Quincy Hughes rounded out the top 5.

Continue reading the report here

March 4, 2019

Capricorn C80 new design front & rear hubs

Coming from Capricorn are new design front and rear and hubs for their C80x series of 1/8th scale on-road kits. The hubs sport separate aluminium bearing inserts that ensure super-precise bearing installation and a drivetrain that produces less drag during acceleration as the bearings do not flex – and pinch – under load. The result is increased drivetrain efficiency that can add up to 2km/h of top speed. In addition the patent pending hubs feature a new geometry for increased steering and traction.

View more images here

March 4, 2019

Patrick Hofer TQs & wins at Bütschwil Indoor GP

The 2019 Bütschwil Indoor GP was held this past weekend in 1/8th nitro and electric off-road classes. In Nitro Buggy it was Team Associated’s Patrick Hofer with the overall TQ from HoBao’s Max Hesse. In the 45-minute main final Patrick was able to bring home the win with a 3-lap margin on Xray’s Samuele Lenzi as Max Hesse had to settle for 3rd, some 2-laps down on Samuele.

Image: Patrick Hofer

March 4, 2019

Bittydesign 1/10th 190mm GT bodyshell – Teaser

Bittydesign have released a first teaser image of their forthcoming new 190mm GT body shell. Designed with GT and USGT racing in mind the body seems to be a of a pretty radical design given the aggressively looking front end. Full details are expected to surface soon.

Source: Bittydesign [bittydesign.net]