Available from Border Racing Products is a 1.5mm fibreglass T-bar for the Tamiya TRF102 formula car. Specially developed for medium to high-bite carpet tracks the part is cut from high-quality 1.5mm FRP material and a direct replacement for the standard T-bar, yet much stronger to overcome the breaking issues associated with the original part.
Source: The Border [the-border.com]
Yokomo have introduced the Racing Performer line of precision 64 pitch pinion gears. Cut from high-quality aluminium and featuring a special treatment to make for a hard-wearing yet low-friction surface the gears are available in a range from 20T to 26T, making them best ideal for Touring Modified and 1/12th scale cars.
Source: Yokomo [teamyokomo.com]
Schumacher have released a wheel arch cutting jig for 1/10th touring cars. The jig ensures accurate and repeatable cutting out of wheel arches time after time. Simply set the car to the required ride height and position the body shell to the desired height. Position the jig flush with the outside of the body shell and locate the centre of the axle through the hole in the tool. The end radius is different from side to side to prevent body tucks so the the jig’s orientation is critical. Hold the jig and draw round the inside with a fine marker pen and then carefully cut to the line with a pair of curved scissors. The jig can also measure wing overhang with the handy 10mm step.
Round 2 of the Xray Winter Series Morava was again held at the Jedovnice sports hall. The event attracted 64 racers to compete in the five classes of Touring Open, Stock 17.5T, Hobby, Formula and GT. The Touring Open class was dominated by the fight between the two teammates David Nemcek and Kuba Simurda. In the finals Kuba held the upper hand over David to take the day’s win while Michal Vitamvas would round out the top 3 result.
Continue reading the report here
Following a first teaser image Yokomo now have revealed all details of their forthcoming YR-10 formula car kit. Developed especially for the ever growing 190mm rubber tyre class the car features a front suspension made of carbon fibre upper and lower arms combined with a standard kingpin and recoil spring setup as well as a split aluminium bulkhead that allows for a floating servo mount to produce smooth and consistent front chassis flex. The rear end features long side links and a large volume centre shock absorber to extract as much grip as possible from the rubber tyres. Large volume side dampers improve the side bite on throttle input and the kit will come race ready, complying with the ETS rules, including Ride XR tyres and Montech front and rear wings. Coming soon is also a Montech-made formula bodyshell.
Muchmore have upgraded their Impact FD2 range of competition LiPo batteries with the addition of four new packs. First up is the Max Punch 6200mAh standard size pack made of 110C cells. Weighing in at 307g the pack is both light of weight while offering maximum punch for both modified and stock racing thanks to a high-performance cell chemistry. Also new are a bolstered-up 5000mAh 110C Shorty pack, a 4000mAh 110C 18.3mm high low-profile 2S Shorty and a 8000mAh 110C 1S pack for 1/12th scale applications. All offer improved capacities over their predecessors and they utilize standard 4mm connectors.
View the other new batteries here
Round 1 of the SoCal RC Scale Series was held at TQ RC Racing in Chino. With Summer coming to an end, it was time to return to begin the second year of the popular Winter Series. Five race days comprise the series and a drivers’ best four event results count toward the end of series awards for both Sportsman and Expert drivers. The Formula cars were first to set qualifying times for their race heats for the day. The series’ unique system uses a three minute qualifying run to set the five best (non-consecutive) laps averaged together. Josh Tran would hold the initial TQ spot with his qualifying time of 11.320 in the first group but there were some heavy hitters eager to best Josh’s time. When the dust settled, Craig “Cuda” Hammon, after a lot of hard work to get his carpet competitiveness close to his outdoor pace, took the top spot; narrowly besting Aaron Lane with a five lap average of 10.656 to Aaron’s 10.667, just 0.011 second gap. Third qualifier would be Kevin “Panda” Cole with a 10.938 effort. The difference between 3rd to 9th qualifiers was only 0.2 seconds. The change this season from 21.5 to 25.5 motors has closed the overall gap and would make for some very exciting racing.
Continue reading the report here
Roche have released a first teaser image of their forthcoming Rapide F1 1/10th scale formula pan car kit. The vehicle is in its final development stages and set for a release in January 2016. Nothing is known yet in terms of specifications and features but the image available that shows a somewhat “industry standard” front end, utilising double carbon fibre arms, a single bellcrank steering system and a floating aluminium servo mount. We bring you more details and images as soon as they become available.
Source: Roche [rocherc.com]
