Red RC

October 31, 2018

Muchmore CDS10 high voltage low profile servo

Coming from Muchmore is their new CDS10 high voltage low profile servo. Equipped with a coreless motor and dual ball bearings the servo is capable of up to 12.5kg-cm of torque at a speed of down to 0.055s utilising 6V to 8.4V input. The geartrain is made up using titanium and aluminium gears for a low weight and exceptional durability and the case uses composite upper and lower parts with the middle heatsink section sporting white Muchmore logos. The servo weighs in at 42g and it will hit stores soon.

View a list of the specifications here

October 31, 2018

Jason Nugroho wins at Urban Community Park Rd4

The 4th round of the Urban Community Park series was held last weekend at the UCP Track in Cisauk, West Java. The track is located about 50km from Jakarta city and a total of 55 drivers from Jakarta, Medan, Bandung, Batam, Padang, Banjarmasin as well as local drivers attended the race. The schedule consisted of four rounds of 5-minutes qualifiers with the three best to count. Jason Nugroho didn’t had the best of starts as he missed the practice sessions going into the weekend, however he was able to bump-up from the B-main into the A-main and from the 11th position on the grid he soon took over the lead, after some ten minutes into the race, to bring home the win from Stanley Wangsanegara 2nd and Richard Suryo 3rd.

Source: Xray [teamxray.com]

October 30, 2018

STRC TRX-4 brass +3mm off-set hex adapters

ST Racing Concepts have introduced their new brass +3mm off-set hex adapters for the Traxxas TRX-4 trail truck. Having more weight at the lower part of the scale crawler can help with stability and climbing capability of the vehicle and brass option parts with its combination of durability and heavier weight can help achieve this performance edge. STRC’s hex adapters not only add more weight to the front and rear drive axles – a combined total of 25g – it also slightly increase the width of the TRX-4 giving it more stability. The adapters are black treated for a realistic look and durability and they come in sets of four.

Source: ST Racing Concepts [teamstrc.com]

October 30, 2018

R1 Wurks V21 brushless stock motors

R1 Wurks have introduced their new V21 brushless stock motors. Improved in three key points over the V16, the Version 21 offers further increased speed, optimised cooling and better tuning, meaning owners can extract more performance from the motor in a broader range of both gearing and timing. The stator is built from proprietary R1 laminate material, the end wind is epoxy-bonded and an ultra-low resistance collector ring is used, all resulting in improved punch and top speed. Included with the motor, that is available in 13.5T, 17.5T and 21.5T variants, comes an aluminium timing ring.

View more images here

October 30, 2018

Wesley van Helmond wins at Winter Is Coming race

The Winter Is Coming race was held at the Dutch Mach One track last weekend. The event was held in 1/8th Nitro and Electric classes and it saw SWorkz’s Jarno Pijpers taking the TQ in the Nitro Buggy class. In the 30-minute main final however it was SWorkz’s Wesley van Helmond who would hold the upper hand, taking the win a lap in front of Jeffrey Halsema (Serpent) as Colin Meijer (Serpent) rounded out the top 3 another lap down.

Source: Triton RC [tritonrc.com]

October 30, 2018

TPro Raider 1/8th buggy qualifying tyre

TPro have introduced their new Raider 1/8th buggy tyre. A professional qualifying tyre the Raider offers a T-bar centre design and smaller outer square pins, making it suitable for a range of track conditions ranging from wet, over dusty to loose surfaces where the tread will ensure exceptional steering, a fast response and good acceleration. This is further helped by the lightweight rubber. The tyre will be available for the upcoming IFMAR Worlds in Perth, Australia and it will hit stores shortly after.

Source: TPro [tproracing.com]

October 30, 2018

HB Racing D817/E817 JC Silencer lightweight body shell

Now available from HB Racing is the Silencer lightweight body shell from JConcepts. The Silencer lightweight lid is a no compromise body for hardcore racers. It is 30g lighter than the standard bodyshell for a lower CG, quicker acceleration and improved corner speed, however durability will be lower than the standard thickness version. This clear body has dimples for easy installation on E817 and D817 buggies.

Source: HB Racing [hbracing.com]

October 30, 2018

Raceform 1/8th Perfect Wheel Arc Cutter

Raceform have introduced their new Perfect Wheel Arc Cutter for 1/8th on-road cars. The tool ensures a 100 percent symmetrical wheel arc left and right and it also eliminates the pain of damaging a wonderfully painted shell during trimming of the wheel arc. The tool works with any standard hobby knife blade and offers an adjustable arc diameter of 70mm up to 80mm. The secured positioning design ensures that tool will not move if two or more cuts are required. The cutter features triple ball bearings for smooth movement, it is super safe to use and suitable for polycarbonate bodies of up to 1mm of thickness.

View more images here