Red RC

June 5, 2018

Xpress XQ1S anti-roll bar set

Coming from Xpress and made for their Execute XQ1S club-level touring car is a complete anti-roll bar kit. The set includes all available swaybar wires and also suitable mounting hardware to make it a drop fit on both the front and rear axle of the car. Using the anti-roll bars helps in a variety of conditions, from low to high grip, as they reduce body roll and thus take away some steering while also improving traction at the same time.

View the mounted anti-roll bar here

June 5, 2018

T-Works 17mm truggy wheel hex hubs

T-Works have introduced new 17mm wheel hex adapters for truggies such as the ones from Mugen and SWorkz. They are of a dual lock design with the usual grub screw that retains the cross pins but the hubs also feature a groove to fit the supplied rubber O-rings in for improved security and reliability. The hubs are machined from high quality aluminium, they come black anodised and in either 11.5mm or 9.5mm offset specification to alter the vehicle’s track width.

View the 9.5mm offset hubs here

June 5, 2018

Marco Baruffolo wins Italian Four Race

The recent Four Race was held in Italy and it saw national frontrunner, Marco Baruffolo (Xray) taking the TQ and win in the Nitro Buggy class. Three laps down Agama’s Giovanni Camamo came in 2nd from Mugen driver Andrea Di Cecco in 3rd.

Source: Xray [teamxray.com]

June 5, 2018

Liptak & Havránek win at MORAC Ring club race

The Austrian MORAC Ring held a club race this past weekend and in the 1/8th IC Track class it was Tomáš Lipták who came out on top after the double 20-minute A-main finals. Branislav Panák and Erich Scharler would round out the top 3. Over in the single 30-minutes 200mm main final it was Oliver Havránek with the overall win from Filip Obora and Igor Lipták.

View the 200mm podium here

June 5, 2018

Muchmore Hybrid Touch Duo AC/DC charger

Muchmore have introduced their all-new Hybrid Touch Duo AC/DC charger. The device sports dual 200W power circuits for simultaneously charing battery packs with up to 20A of charge current while the 4.3 inch full colour touch display allows to access the charger’s extensive menu options. An integrated power supply allows to feed optional accessories such as tyre warmers, pit lamps etc. while the USB port powers smartphones, tablets and other devices. The charger is usable with 110 to 240VAC or 10 to 30VDC and it will hit stores very soon.

View a list of the specifications and more images here

June 5, 2018

Hiro Seiko XeRun V10 G3 lightweight screw kit

Hiro Seiko have introduced their new lightweight screw kit for the Hobbywing XeRun V10 G3 brushless motor. The set includes three M2x43mm titanium screws and a single M2.4x5mm fastener, the latter being available in a multitude of colours including orange, red, gun metal, dark blue, bright blue and purple. While adding a certain bling to the motor the set will lower the overall weight while, most importantly, it will allow the motor to rev higher and perform better as the fasteners will have no magnetic influence on the rotor which will result in a more agile behaviour.

View more images here

June 5, 2018

Kyle Branson wins at British Open GP

Round 4 of the BRCA IC Track National Championship was held at the Brookline track and was held as the British Open GP together with the 1/10th 200mm GP class. The latter saw Alex Thurston taking the overall TQ honours after winning Q1 and Q2. In the final Alex had a clean start with him, Kyle Branson and Mark Green having a great race up front until a marshall put a back marker back on the track just before the straight meaning that Alex would come along and smash into him flat out. The crash crushed his car’s body, broke his bumper and damaged a front shock and the following pitstop meant that he was out of the equation for the win. Alex lost a good amount of laps, however with a borrowed shock from a retired teammate he was able to at least score a 3rd place finish to snatch valuable points as Mark Green came in 2nd and Kyle Branson took the win.

Image: Alex Thurston

June 5, 2018

Tamiya TB-05 carbon fibre shock towers & side rails

Tamiya have introduced new carbon fibre option parts for the TB-05 Pro touring car. The range includes 3mm front and rear graphite shock towers that offer increased strength and also more tuning options compared to the standard composite parts. The front tower utilises a total of five different upper shock mounting positions while the rear towers offers seven different mounting holes. Both parts are available separately and they come including suitable mounting hardware. Also new are 2.5mm carbon fibre side rails to reinforce the chassis construction. The items maintain good accessibility to the chassis components yet increase pitch and roll stiffness. Includes comes an assortment of mounting hardware to make it a drop fit. All parts will become available by end of July.

View the other new parts here