Red RC » P On Road

July 15, 2012

Exotek TC6TEK performance chassis conversion

Exotek have release their TC6TEK performance ultra narrow LiPo chassis conversion set complete with bushing supported hinge pin blocks for the TC6.1 or TC6. The new design incorporates heavy duty bushing supported hinge pin blocks, the same concept incorporated into other world caliber touring cars by Tamiya, Yokomo and Hot Bodies. The steel insert bushings insure ultra free suspension movement, no matter the arm angles. Newly designed 7075 heavy duty bulkheads are included and their shortened design allows for improved chassis flex. 4 heavy duty 7075 suspension blocks are included, FF-C, FR-C (split style), RF-XB (split style) and RR-D and the included blocks will give you 0 degree of front arm sweep and 3 degrees of rear toe. The chassis is made from 2.25mm USA made precision cut soft weave carbon fiber and at only 84mm wide the main chassis can better utilize lower ride heights for more aggressive cornering.

View the complete conversion set here

July 14, 2012

Capricorn tire additivator V2

Capricorn have introduced the V2 version of their tire additivator. The new version additional features 2 lamps, and lamp protectors, to directly heat the contact point of the tire increasing the effect of absorption of the sponge for better penetration and durability of the additive in the foam.

View more images here

July 13, 2012

Roche body height adjuster & TRF417 ARB mount

Roche have introduced two new items for touring car, the first is this set of aluminium body height adjuster, the idea for which came from factory driver Elliott Harper. The adjuster makes it easier to adjust the height of the body shell, from 0-5mm. There is a 1mm o-ring inside the adjuster so that it will not change height during use. Three colours are available, blue, purple & titanium, to suit all cars with a 6mm body post. Also new for the Tamiya TRF417 is an aluminum anti-roll bar mount. CNC-machined from 6061 T6 aluminium, the roll-bar is centered by a 4mm rod stopper and the tension on the roll bar is adjusted by the 3mm set screw on both sides of the holder. With perfect alignment and a harder material than the original plastic material mounts, the roll bar will always function freely.

View more images of the products here

July 13, 2012

Tamiya 417X ‘Reedy Race’ chassis

To commemorate Viktor Wilck’s win at the Reedy Invitational touring car race in May, Tamiya have released a limited edition (200pcs) version of the TRF417X called the TRF417X Reedy Race. A small update from the original car it has been altered to help improve the low speed traction so it features an updated chassis and top deck. Also the shock towers have been made from 3.5mm thick carbon fibre and feature shock mounting holes that allow for a more precise setting change. The battery mount has been made of metal to increase weight low down and it will be supplied with front and rear gear diffs. Finally it comes with chrome and blue Tamiya decals.

View more images here

July 12, 2012

Toennessen wins Rd3 of Western German Champs

Mugen racer Daniel Toennessen was walking on water on his way to winning round three of the Western German Championship in the 1/10 scale nitro on-road class at Velp. Toennessen became the third winner in the third race with René Puepke winning round one at Dormagen and Michael Salven winning at Dueren. Bernd Rausch has been the main challenger at every race but is still waiting for his first victory. Nevertheless, the Kyosho hotshot is leading the championship ranking.

Continue reading the report here

July 11, 2012

Smokem Racing 417FX chassis plate

The Smokem FX chassis is now available for the TRF417 and TRF417X. The new 417FX features a unique carbon weave that is integral to its innovative design. The design and carbon specification was meticulously engineered, tested and refined over many months with the help of a well known TRF driver. The 2.2mm thick chassis has an overall width of only 88mm to minimize scrubbing during hard cornering. By incorporating many symmetrical elements throughout its design, the 417FX is perfectly balanced in its flex characteristics. This delivers consistent handling from corner to corner, lap after lap. And by complementing this distinctive design with a unique, high performance carbon weave, the 417FX delivers unparalleled steering response while maximizing rear traction.

View another image of the chassis plate here

July 11, 2012

Armin Baier wins Rd5 in Southern Germany

Last weekend the MCC Türkheim hosted the 5th round of the Southern German Championship. Although the weather forecast didn’t look too good, the actual weather was great throughout the entire weekend. In class 1 Christoph Pietsch, Robert’s uncle, took TQ with his OS powered Mugen while second place went to Armin Baier, running a Picco powered Motonica P81RS2 and third was Shepherd / Sonic driver Maximilian Vogl. In class 2 Ralf Drachsler, Mugen / RB took the top spot in front of Maximilian Günther, Motonica P81RS2 / Picco and Alexander Bremberger.

Continue reading the report here

July 11, 2012

Serpent 747 chassis, wishbones & ARBs

Serpent have released more new optional parts for their 747 1/10th 200mm chassis. First up is a CNC machined 3mm aerospace quality 7075 T6 aluminium chassis plate featuring a symmetrical design to create equal torsion. Other features include chamfered edges, countersunk holes and cooling holes for the engine plus it is hard anodised for extra stiffness. Also new are these hard rear lower arms which can be used in place of the medium hardness kit versions to help improve performance under high grip conditions and high temperatures. Finally Serpent now offers 5 rear anti-roll bars for the 747 to fine-tuning your set-up. Made from top-quaity spring-steel, they are black-coated and have a line indicator for thickness. Available in 1.8mm to 2.2mm thicknesses.

View the other products here