Red RC » P On Road

July 16, 2013

Xray T4 closed layshaft bulkhead

Xray introduce this new design middle layshaft holder for the T4 touring car. Different from the original ‘open’ part the ‘closed’ designed of the bulkhead captures the layshaft bearings to allow the removal of the upper topdeck screws in order to further adjust chassis flex and therefore the characteristic of the car. The bulkhead is useable on the left and right hand side and is made from 7075-T6 aluminium and comes orange anodised to match with the remainder of the chassis.

Source: Xray [teamxray.com]

July 16, 2013

Tamiya FF-03 Evo FWD chassis – teaser

Coming soon from Tamiya, and currently only available as slightly blurry preview image, is the FF-03 Evo 1/10th electric front wheel drive chassis. The latest generation FWD offers a newly-designed 2.5mm carbon chassis with 2mm upper deck and 3mm rear damper stay. The front of the chassis sees the addition of laydown shock absorbers with the rear ones are mounted in a conventional way. Included in the kit will be also fully alloy TF shocks, a front gear differential, and dual joint universal drive shafts. The kit will kit Japanese stores at the end of August.

Source: Tamiya [tamiya.com]

July 16, 2013

Alessio Mazzeo wins 2013 Italian 200mm nats

The final round of the Italian 200mm nationals took place at the tight and twisty track in Palermo, Sicily. Serpent driver Alessio Mazzeo took TQ after Saturday’s qualifying and this meant the battle for the overall win between him and Dario Balestri was wide open. Sunday’s final though saw Alessio leading the race from start to finish and even an additional stop to change all four tyres did not stop him on his way to the overall title win.

Source: Serpent [serpent.com]

July 16, 2013

Mustafa Alp wins TC Modified and Stock at TTS Rd4

The fourth round of the TTS was held at the newly build electric on-road track of İMOP, located in the centre of a park making for a good racing atmosphere and lots of audience. The track itself is very technical with a 20 metre long sweeper just before the main straight. Open practice started on Friday followed by five controlled practice rounds on Saturday. Both the touring Modified and Stock class was TQ’d by Serpent’s Mustafa Alp followed by Erol and Serpent driver Ahmet Tekelioglu in the Modified class and Murat Çağış as well as Akın Gürsoy in Stock.

Click here to continue reading

July 16, 2013

Brooks & Clinch win BRCA on-road Clubman Rd4

Round 4 of the BRCA Clubman Series electric on-road championship was help at the southern track of Adur. Showing record high temperatures, this would test the drivers to their limits looking at not over heating the control tyres and driving consistency. With the track not being used for electric on-road for a while, Saturday practice was all about rubbering in the track and building the grip up which is vital to not graining the tyres too much. Race day on the Sunday came around with another scorching hot day of 32 degrees air temp. Much hotter than Saturday. Entries coming all over the UK of 90 drivers came down to the fast flowing but technical track to see how they compete against each other. The 17.5 Blinky class showing the bigger entries of 5 heats and the 13.5 Open class showing 4 heats.

Click here to continue reading

July 15, 2013

Hoppe wins 1/8th at North German championship Rd3

The 3rd round of the North German championship took place on the track of the MSC Braunschweig club. Unfortunately nearly the complete practise and the first round of qualifying was rained out on Saturday but in the evening the track was dry the drivers could hit the track for some practise laps. On Sunday the weather was much better and the track stayed dry all day. In the morning three rounds of qualifying were held. Shepherd team driver Lars Hoppe showed an excellent performance with his Sonic-powered Velox V8 “Pro” and secured himself the pole-position for the 30 minute final followed by Serpent pairing of Andreas Giesa and Merlin Depta with Shepherd/Sonic driver Timo Schröder in 4th position.

Click here to continue reading

July 15, 2013

CSO One 5.5mm wheel hex adapters

CSO introduce these aluminium wheel adapters for their One 1/10th electric touring car kit. The parts are CNC-machined from 6061-T6 aluminium and come dark anodised to match the remainder of the cars’s parts. They are of a 5.5mm off-set design and incorporate a grub screw hole to secure them to the wheel shaft for a tight fit even with the wheels removed.

Source: CSO [cso.com.hk]

July 15, 2013

Kyle Branson wins BRCA 1/8th on-road Rd4

Round 4 of the BRCA 1/8th nitro on-road national championship was hosted by the Cotswolds Club and this was the sections second visit this year. With the Euro A championships only 2 weeks away and with the calendar being very full this season meant that the two rounds at this track were run close together. The weekend started with warm weather and after the initial practice had started, the track was soon starting to rubber in and the cars started to lap in the ball park of around the low 15 seconds per lap. With the track getting quicker, it was Branson who was setting the pace, fresh from his Euro warm up victories earlier in the month. In hot pursuit was Green and Wood, all recording sub 15 second laps with Kyle being the most consistent. Behind these, a host of drivers including North, King, Carr, Frost, Diver, Thurston, Hastings, Bancroft were all recording low 15 second laps.

Click here to continue reading